Samsung Television PNF5300 User Manual

								
●RGB Only Mode:	Displays	the	Red,	Green	and	Blue	color	so	you	can	make	
fine	adjustments	to	hue	and	saturation.
	
●Color Space:	Adjusts	the	range	and	variety	of	colors	(the	color	gamut)	
available	to	create	images.
	
NTo	adjust	Color,	Red,	Green,	Blue	and	Reset,	set	Color Space	to	
Custom.
	
●White Balance:	Adjusts	the	color	temperature	of	the	picture	so	that	white	
objects	look	white	(instead	of,	for	example,	slightly	pink	or	slightly	yellow)	and	
the	overall	color	of	the	picture	looks	natural.
R-Offset / G-Offset / B-Offset:	Adjusts	each	color’s	(red,	green,	blue)	
darkness.
R-Gain / G-Gain / B-Gain:	Adjusts	each	color’s	(red,	green,	blue)	brightness.
Reset:	Resets	the	White	Balance	to	its	default	settings.
English
$#  
						

								
●10p White Balance:	Controls	the	white	balance	by	adjusting	the	red,	green,	
and	blue	brightness	over	10	specific	intervals.
	
NAvailable	when	the	picture	mode	is	set	to	Movie.	The	external	input	
(source)	can	be	set	to	any	input.
	
NSome	external	devices	may	not	support	this	function.
Interval:	Select	interval	to	adjust.
Red:	Adjust	the	red	level.
Green:	Adjust	the	green	level.
Blue:	Adjust	the	blue	level.
Reset:	Resets	the	10p White Balance	to	its	default	settings.
	
●Gamma:	Adjusts	the	primary	color	intensity.
English
$#  
						

								
●Expert Pattern:	By	running	the	Expert Pattern	function,	you	can	calibrate	
the	picture	without	a	generator	or	filter.	If	the	OSD	menu	disappears	or	a	
menu	other	than	the	Picture	menu	is	opened,	the	TV	saves	the	calibration	
and	the	Expert Pattern	window	disappears.
	
NWhile	the	Expert Pattern	is	running,	the	TV	does	not	output	sound.
	
NOnly	enabled	when	you	select	a	Component	or	HDMI	source.
	
●Motion Lighting:	Reduces	power	consumption	by	reducing	screen	brightness 	
when	the	picture	on	the	screen	is	motionless.
	
NThis	function	is	not	supported	in	3D	mode.	  for PDP 4900 / LED 6100 series  
	
NWhen	you	change	the	Backlight	  for LED TV   / Cell Light	  for PDP TV  ,	
Contrast,	or	Brightness,	the	TV	sets	Motion Lighting	to	Off .
	
NOnly	available	in	Standard	mode.
English
$#  
						

							 
■
Picture Options
 
O
MENU m 
→  Picture 
→ Picture Options 
→ ENTER
E
Select	an	option	using	the	 ▲/▼/◄/►	buttons,	and	then	press	ENTER
E.
	
NWhen	the	TV	is	connected	to	a	PC,	you	can	only	make	changes	to	Color 
Tone.
	
●Color Tone 
	
NWarm1	or	Warm2	will	be	deactivated	when	the	picture	mode	is	
Dynamic.
	
NYou	can	adjust	and	store	settings	for	each	external	device	connected	to	
an	input	on	the	TV.
English
$#  
						

								
●Digital Clean View:	If	the	broadcast	signal	received	by	your	TV	is	weak,	you	
can	activate	the	Digital Clean View	feature	to	reduce	any	static	and	ghosting	
that	may	appear	on	the	screen.
	
NWhen	the	signal	is	weak,	try	each	option	in	Digital Clean View	until	the	
TV	displays	the	best	picture.
Auto Visualization:	When	you	change	from	one	analog	channel	to	another,	
displays	the	signal	strength.
	
NOnly	available	for	analog	channels.
	
NWhen	you	press	the	INFO	button,	the	TV	displays	the	signal	strength	bar.
	
NWhen	the	bar	is	green,	you	are	receiving	the	best	possible	signal.
	
●MPEG Noise Filter:	Reduces	MPEG	noise	to	provide	improved	picture	
quality.
English
$#  
						

								
●HDMI Black Level:	Lets	you	select	the	black	level	on	the	screen	to	adjust	the	
screen	depth.
	
NAvailable	only	in	HDMI	mode	(RGB	signals).
	
●Film Mode:	Sets	the	TV	so	that	it	senses	and	then	processes	film	signals	
from	all	sources	automatically	and	adjusts	the	picture	for	optimum	quality.
	
NThe	Cinema Smooth	function	is	only	activated	when	an	HDMI	24Hz	
signal	is	inputted.	
  for PDP TV  
	
NAvailable	in	TV	mode	and	all	external	input	modes	which	support	SD	(480i 	
/	576i)	and	HD	(1080i)	signals	except	when	connected	to	a	PC.
	
NIf	the	screen	does	not	seem	natural,	change	the	Film Mode	option	to	
Off ,	Auto1,	or	Auto2.
English
$#  
						

								
●Auto Motion Plus	  for LED 6100 series  	: 	Enhances 	motion	in	fast	moving	 scenes.
	
NThe	info	screen	on	your	TV	displays	the	resolution	and	frequency	of	the	
incoming	video	signal	(60Hz).	This	frequency	is	not	the	frequency	of	the	
picture	the	TV	is	displaying	when	you	have	Auto Motion Plus	on.
	
NIf	noise	occurs	on	the	screen,	please	set	Auto Motion Plus	to	Off .	
If	Auto Motion Plus	is	set	to	Custom,	you	can	set	Blur Reduction,	
Judder Reduction, LED Clear Motion,	or	Reset	manually.
Blur Reduction:	Adjusts	the	blur	reduction	level	of	video	from	all	sources.
Judder Reduction:	Adjusts	the	judder	reduction	level	of	video	sources	
playing	movies.
LED Clear Motion:	Optimizes	the	screen	display	for	fast	action	scenes.
Reset:	Restores	settings	to	default	values.
English
$#  
						

								
●Black optimizer   for PDP TV  :	Deepens	blacks	on	the	screen	and	improves	the	
contrast	ratio.
	
NWhen	the	TV	is	connected	to	a	PC,	Black optimizer	deactivated.
	
NWhen	the	TV	is	operating	other	features,	Black optimizer	is	deactivated.	
(ex.	Media Play,	PIP)
English
$#  
						

							 
■
Picture Off
 
O
MENU m 
→  Picture 
→ Picture Off 
→ ENTER
E
The	screen	is	turned	off	but	the	sound	remains	on.	Press	any	button	except	the	
volume	button	to	turn	on	the	screen.
English
$#  
						

							 
■
Reset Picture
 
O
MENU m 
→  Picture 
→ Reset Picture 
→ ENTER
E
Resets	your	current	picture	mode	to	its	default	settings.
English
$#