Samsung Television PNF5300 User Manual

							10. 	Enter	the	first	portion	of	the	IP	Address	(for	example,	105)	into	the	first	entry	field	using	your	remote.	When	done,	go	to	the	next	field.
11. 	Enter	the	next	portion	of	the	IP	Address.	When	done,	go	to	the	next	field.
12. 	Repeat	the	entry	process	for	each	field	in	the	IP	Address.
	
–If	you	make	a	mistake	when	entering	a	number,	re-enter	the	number	to	
correct	it.
13. 	When	done,	go	to	the	Subnet Mask	fields.
14. 	Repeat	the	same	entry	process	for	Subnet Mask,	Gateway,	and	DNS  Server.
15. 	When	done,	select	OK.	The	network	connection	screen	appears	and	the	 verification	process	starts.	When	the	connection	has	been	verified,	the	"Your 
wireless network and Internet connection are setup and ready to use."	
message	appears.
English
00240023  
						

							If Your TV Fails to Connect to the Internet
If	your	TV	fails	to	connect	to	the	Internet,	read	the	information	below	and	view	the	
troubleshooting	guide	on	the	following	pages.
Your	TV	may	not	be	able	to	connect	to	the	Internet	because	your	ISP	has	permanently	
registered	the	MAC	address	(a	unique	identifying	number)	of	your	PC	or	modem,	which	it	
then	authenticates	each	time	you	connect	to	the	Internet	as	a	way	of	preventing	unauthorized	
access.	As	your	TV	has	a	different	MAC	address,	your	ISP	can	not	authenticate	its	MAC	
address,	and	your	TV	can	not	connect.
To	resolve	this	problem,	ask	your	ISP	about	the	procedures	required	to	connect	devices	other	
than	a	PC	(such	as	your	TV)	to	the	Internet.
If	your	Internet	service	provider	requires	an	ID	or	password	to	connect	to	the	Internet,	your	
TV	may	not	be	able	to	connect	to	the	Internet.	If	this	is	the	case,	you	must	enter	your	ID	or	
password	when	connecting	to	the	Internet.
The	internet	connection	may	fail	because	of	a	firewall	problem.	If	this	is	the	case,	contact	your	
Internet	service	provider.
If	you	cannot	connect	to	the	Internet	even	after	you	have	followed	the	procedures	of	your	
Internet	service	provider,	please	contact	Samsung	Electronics.
English
00240023  
						

							Troubleshooting a wireless network connection failure
If	the	wireless	network	connection	fails,	try	the	following	solutions:
IssueSolutions and Explanations
Wireless	network	
connection	failed. •	
No	wireless	router	selected.	Go	to	Network Settings	to	select	your	
router.
Unable	to	connect	to	
wireless	router.	 •	
Check	if	the	router	is	turned	on,	and	if	it	is	on,	try	turning	it	off	and	on	
again.	
•	 Check	if	you	need	to	enter	a	security	key	to	use	the	router.	
English
00240023  
						

							IssueSolutions and Explanations
IP	auto	setting	failed. •	Try	the	following	to	set	your	IP	address	automatically	or	set	your	IP	
address	manually	by	selecting	IP Settings.
					-		 Ensure	DHCP	server	is	enabled	on	the	router,	and	then	unplug	and	
plug-in	the	router.
					-	Check	if	you	need	to	enter	a	security	key	to	use	the	router.	
					-	Contact	your	Internet	Service	Provider	for	more	information.
Unable	to	connect	to	
the	network. •	
Check	if	your	IP	address	is	set	correctly	in	IP Settings.
•	 Check	if	you	need	to	enter	a	security	key	to	use	the	router.
•	 Contact	your	Internet	Service	Provider	for	more	information.
English
00240023  
						

							IssueSolutions and Explanations
Connected	to	your	
local	network,	but	
cannot	connect	to	the	
Internet.	 •	
Make	sure	your	Internet	LAN	cable	is	connected	correctly	to	the	LAN	
port	of	the	router.
•	 Check	the	DNS	settings	in	IP Settings.
•	 If	the	problem	persists,	contact	your	Internet	Service	Provider	to	access	
the	Internet.
Network	setup	
complete,	but	cannot	
connect	to	the	Internet.	 •	
Confirm	that	your	router	is	connected	to	the	Internet.
•	 If	the	problem	persists,	contact	your	Internet	Service	Provider	to	access	
the	Internet.
English
00240023  
						

							 
❑
Managing the Network Connected Devices
  for PDP 4900 series  
 
■
Wi-Fi Direct
 
O
MENU m 
→  Network 
→ Wi-Fi Direct
→ ENTER
E
Use	to	connect	the	TV	to	wireless	mobile	devices.	Using	this	function,	you	can	
connect	wireless	mobile	devices	with	your	TV	directly	without	a	wireless	router.
	
NYou	can	use	this	function	only	when	the	Samsung	Wireless	LAN	Adapter	is	
connected	to	the	TV.
	
NWi-Fi	Direct	only	supports	the	Media Play	function.
	
NWi-Fi	Direct	may	not	be	supported	by	your	mobile	device,	depending	on	the	
device.
English
$#  
						

							How to connect a device to your TV using the Wi-Fi Direct function
	
NTo	use	this	function,	you	must	turn	on	the	Wi-Fi	Direct	function	on	your	
device.
1.	 In	the	TV's	menu,	go	to	Wi-Fi Direct.	The	TV	starts	to	search	for	devices. (Network	 →	Wi-Fi Direct)
2.	 Select	a	device	from	the	list	that	the	TV	displays,	and	then	press	ENTER E	
button.
3.	 When	the	connection	message	appears	on	your	device,	allow	it.
	
NIf	you	want	to	disconnect	the	device,	select	the	connected	device,	and	press	
the	ENTER E	button	to	select	Disconnect.
English
$#  
						

							 
■
AllShare Settings
 
O
MENU m 
→  Network 
→ AllShare Settings 
→ ENTER
E
Lets	you	allow	a	network	connected	device	such	as	a	smartphone	or	tablet	to	
share	content	with	or	control	the	TV	using	an	application	downloaded	to	the	
mobile	device.	For	details	on	set	up	options,	refer	to	the	“Using	the	AllShare	
Settings	Functions”.
 
■
Device Name
 
O
MENU m 
→  Network 
→ Device Name 
→ ENTER
E
Change	the	TV’s	name.
	
NWhen	selecting	User Input,	you	can	key	in	a	name	for	your	TV	manually.	Use	
▲/▼/◄/► 	buttons	to	select	characters,	and	then	select	Done.
English
$#  
						

							 
❑
Using the DLNA Functions (AllShare™)
  for PDP 4900 series  
Via	your	network,	you	can	play	videos,	photos,	and	music	saved	on	your	mobile	
phone	or	on	other	devices	(such	as	your	PC)	through	your	TV,	and	control	
playback	using	controls	on	the	TV	via	the	network.
	
NNOTE
	
●This	model	only	supports	the	DLNA	function	in	AllShare™.
	
●First,	connect	your	TV	to	your	network.	For	detailed	network	connection	
instructions,	refer	to	“Network Settings”.
	
●For	more	information,	visit	“www.samsung.com”	or	contact	the	Samsung	
call	center.	Mobile	devices	may	need	additional	software	installed.	For	
details,	refer	to	each	device’s	user’s	guide.
	
●If	your	Samsung	TV	connects	to	a	non-Samsung	DLNA	server,	a	
compatibility	issue	may	occur	during	video	playback.
English
$#  
						

								
NBy	connecting	your	Samsung	TV	to	a	network	via	AllShare™,	you	can	use	
Samsung’s	original	functions,	controls,	and	capabilities	as	follows:
	
–Playback	of	various	video	formats	(DivX,	MP4,	3GPP,	AVI,	ASF,	MKV,	etc.)
	
–Bookmark	function	(to	resume	video	playback)
	
–Auto-chaptering	(scene	navigation)
	
–Digital	content	management
	
–Compatibility	with	various	subtitle	formats	(SRT,	SMI,	SUB,	TXT,	TTXT)
	
–And	many	others
	
NTo	use	Samsung's	original	DLNA	functions	fully,	we	recommend	that	you	use	
the	AllShare™	software	provided	with	your	TV.
English
00240023