Samsung Television PNF5300 User Manual

								
●When	the	TV	is	connected	to	a	PC,	you	can	only	make	changes	to	
Backlight	
  for LED TV   / Cell Light	  for PDP TV  ,	Contrast,	Brightness,	and	
Sharpness.
	
●You	can	adjust	and	store	settings	for	each	external	device	connected	to	
the	TV.
	
●Lowering	picture	brightness	reduces	power	consumption.
English
$#  
						

							 
■
Picture Size  t
 
O
MENU m 
→  Picture 
→ Picture Size 
→ ENTER
E
Picture Size	provides	various	picture	size	and	aspect	ratio	options.	Select	an	
option	using	the	 ▲/▼/◄/►	buttons,	and	then	press	ENTER
E.
	
●Picture Size:	If	you	have	a	cable	box	or	satellite	receiver,	it	may	have	its	own	
set	of	screen	sizes	as	well.	However,	we	highly	recommend	you	use	your	TV’s	
16:9	mode	most	of	the	time.
16:9:	Sets	the	picture	to	16:9	wide	screen	mode.
Zoom1:	Magnifies	the	picture	moderately.	Cuts	off	the	top	and	sides.
Zoom2:	Magnifies	the	picture	more	than	Zoom1.
Wide Fit:	Enlarges	the	aspect	ratio	of	the	picture	so	it	fits	the	entire	screen.
English
$#  
						

							4:3:	Sets	the	picture	to	4:3 mode.	For	analog	TV	programs.
	
NDo	not	set	your	TV	to	4:3 format	for	a	long	time.	The	borders	displayed	
on	the	left	and	right,	or	top	and	bottom	of	the	screen	may	cause	image	
retention	(screen	burn)	which	is	not	covered	by	the	warranty.
Screen Fit:	When	your	TV	inputs	HDMI	(720p	/	1080i	/	1080p)	or	Component	
(1080i	/	1080p)	signals,	displays	the	full	image	without	any	cut-off.
Smart View 1	
  for LED TV  :	Reduces	the	original	screen	by	50%.
Smart View 2	
  for LED TV  :	Reduces	the	original	screen	by	25%.
	
NNote
	
●Smart View 1	is	enabled	only	in	HDMI	mode.
	
●Smart View 2	is	enabled	only	in	DTV	and	HDMI	modes.
English
$#  
						

								
●Position:	Adjusts	the	picture	position.	Position	is	only	available	if	Picture 
Size	is	set	to	Zoom1, Zoom2, Wide Fit,	or	Screen Fit.
	
NTo	use	the	Position	function	after	selecting	Zoom1, Zoom2	or	Wide Fit,	
follow	these	steps:	
1.	 Select	Position,	and	then	press	the	ENTER E	button.
2.	 Select	the	Position	button,	and	then	press	ENTER E.
3.	 Press	the	 ▲/▼	buttons	to	move	the	picture	up	or	down.
4.	 Press	the	ENTER E	button.
	
NIf	you	want	to	reset	the	pictures	to	its	original	position,	select	Reset	in	the	
Position	screen,	and	then	press	ENTER E.	The	picture	will	be	reset	to	
its	default	position.
English
$#  
						

								
NTo	use	the	Position	function	after	selecting	Screen Fit	when	connected	
to	an	HDMI	(1080i/1080p)	or	Component	(1080i/1080p)	source,	follow	
these	steps:	
1.	 Select	Position,	and	then	press	the	ENTER E	button.
2.	 Select	the	Position	button,	and	then	press	ENTER E.
3.	 Press	the	 ▲/▼/◄/►	buttons	to	move	the	picture.
4.	 Press	the	ENTER E	button.
	
NIf	you	want	to	reset	the	pictures	to	its	original	position,	select	Reset	in	the	
Position	screen,	and	then	press	ENTER E.	The	picture	will	be	reset	to	
its	default	position.
English
$#  
						

								
NThe	picture	size	can	vary	depending	on	the	input	resolution	when	you	
play	content	using	Videos	in	Media Play.
	
NHD	(High	Definition)	is:	16:9	-	1080i/1080p	(1920x1080)	or	720p	
(1280x720)
	
NYou	can	adjust	and	store	settings	for	each	external	device	you	have	
connected	to	an	input	on	the	TV.
	
NPicture	Sizes	available	by	Input	Source:
Input Source Picture Size
DTV	(1080i,	1080p) 16:9, Wide Fit, 4:3, Screen Fit, Smart View 2
DTV	(720p) 16:9, Wide Fit, 4:3, Smart View 2
DTV	(480i,	480p) 16:9, Zoom1, Zoom2, 4:3, Smart View 2
ATV,	AV 6:9, Zoom1, Zoom2, 4:3
Component	(1080i,	1080p) 16:9, Wide Fit, 4:3, Screen Fit
Component	(720p) 16:9, Wide Fit, 4:3
Component	(480i,	480p) 16:9, Zoom1, Zoom2, 4:3
HDMI	(720p,	1080i,	1080p) 16:9, Wide Fit, 4:3, Screen Fit, Smart View 1, 
Smart View 2
English
00240023  
						

							 
■
PIP
 
O
MENU m 
→  Picture 
→ PIP 
→ ENTER
E
You	can	watch	a	program	whose	signal	has	passed	through	the	TV’s	tuner	and	
watch	one	external	video	source	simultaneously.	For	example,	if	you	have	a	cable	
box	connected	to	the	Cable	In	jack,	you	can	use	PIP	to	watch	programs	from	the	
cable	box	and	watch	a	movie	from	a	Blu-ray	player	attached	to	the	HDMI	In	jack.
	
NNOTE
	
●For	PIP	sound,	refer	to	the	Sound Select	instructions.
	
●If	you	turn	the	TV	off	while	watching	in	the	PIP	mode,	the	PIP	function	
is	reset	to	off.	When	you	turn	your	TV	on,	you	must	turn	PIP	on	again	to	
watch	in	the	PIP	mode.
English
$#  
						

								
●You	may	notice	that	the	picture	in	the	PIP	window	becomes	slightly	
unnatural	when	you	use	the	main	screen	to	view	a	game	or	karaoke.
	
●When	Program Rating Lock	is	on,	you	cannot	use	PIP.
	
●PIP	Settings
The	picture	from	the	external	video	source	will	be	in	the	main	screen	and	
the	picture	from	the	TV’s	tuner	will	be	in	the	PIP	sub-picture	window.
Main picture Sub picture
Component,	HDMI TV
English
$#  
						

								
●PIP:	Activate	or	deactivate	the	PIP	function.
	
●Antenna:	Select	either	Air	or	Cable	as	the	input	source	for	the	sub-
screen.
	
●Channel:	Select	the	channel	for	the	sub-screen.
	
●Size:	Select	a	size	for	the	sub-picture.
	
●Position:	Select	a	position	for	the	sub-picture.
	
●Sound Select:	You	can	choose	to	listen	to	the	sound	from	the	Main	
picture	or	the	Sub	picture.
English
$#  
						

							 
❑
Changing the Picture Options
 
■
Advanced Settings
 
O
MENU m 
→  Picture 
→ Advanced Settings 
→ ENTER
E
Advanced Settings	are	available	in	the	Standard	and	Movie	modes.
To	use,	select	an	option	using	the	 ▲/▼/◄/►	buttons,	and	then	press	ENTER
E.
	
NWhen	the	TV	is	connected	to	a	PC,	you	can	only	make	changes	to	the	White 
Balance	and	Gamma.
	
●Dynamic Contrast:	Adjusts	the	screen	contrast.
	
●Black Tone:	Select	the	black	level	to	adjust	the	screen	depth.
	
●Flesh Tone:	Adjusts	the	amount	of	red	in	skin	tones.
English
$#