Samsung Television JS9500 User Manual

							6465
Using voice recognition at a long distance
MENU/123  MENU  System  Voice Recognition  Enabled Microphones
You can use the TV's built-in microphone. Select Enabled Microphones, and then select the model 
name of the remote control and the microphone.
 "This function is only supported by the 9500 series models.
 "When you use the SEK-3500 series models of UHD Evolution Kit, the TV must have a built-in camera to use 
this function.
Testing for noise around the TV's built-in microphone
MENU/123  MENU  System  Voice Recognition  Voice Control Environment Test
This test determines how well Voice Recognition will work in the TV’s current environment. Perform 
the Voice Control Environment Test before using Voice Recognition to make sure it functions properly.
 "This function is only supported by the 9500 series models.
 "When you use the SEK-3500 series models of UHD Evolution Kit, the TV must have a built-in camera to use 
this function.
1. Run Voice Control Environment Test and stand within 13 feet (4 m) of the TV.
2. Select Start to measure the echo level. If the echo level is suitable, the test will continue to the 
next step. If this part of the test fails, remain quiet and try again.
3. Select Start to measure the ambient noise. If the ambient noise level is suitable, the test will 
continue to the next step. If this part of the test fails, remain quiet and try again.
4. Measure the volume and clarity of your voice. Say "Hi TV," and then say the command on the 
TV's screen loudly and clearly within 30 seconds. If the TV successfully recognizes your voice, 
the test continues to the next step. If this part of the test fails, try again.
 "The trigger word "Smart TV" is not supported in specific geographical areas. However, if you set the 
Menu Language to English, the trigger word "Smart TV" is available.
Checking ambient noise and illumination (Voice and motion control environment 
Check)
MENU/123  MENU  Support  Self Diagnosis  Voice & Motion Control Environment Check or 
Motion Control Environment Check
You can test the ambient noise and brightness levels around the TV camera and microphone to ensure 
that they are suitable for voice and motion control use.
 "The actual name may differ with specific geographical area.
Using the voice recognition tutorial
MENU/123  MENU  Support  Voice Recognition Tutorial Try Now
The tutorial lets you familiarize yourself with the basics of using Voice Recognition. Run Voice 
Recognition Tutorial from the Support menu, or run Voice Recognition and say "Tutorial". 
						

							66
Controlling the TV using Motions (Motion Control)
MENU/123  MENU  System  Motion Control Try Now
Motion Control is not available:
 –When you are playing UHD-level video saved on a USB device
 –When you are viewing a digital channel with UHD-level resolution
 –When you are using the Samsung Smart Control or a mouse
 "This function is not supported by some apps.
 "For more information, refer to "Read Before Using Voice, Motion, or Face Recognition."
 [When your TV is a 9000 series model, or your TV does not have the built-\
in camera with 
the SEK-3500 series models of UHD Evolution Kit installed, the TV must b\
e connected to 
an optional camera to use this function. The optional TV camera must be connected to the 
dedicated USB port at the back of the TV. The other USB ports do not support the camera or 
Motion Control.
Testing ambient illumination using the TV camera
MENU/123  MENU  System  Motion Control  Motion Control Environment Test Try Now
Run this test before using Motion Control to ensure proper functionality.
1. Stand 5 to 11.5 feet (1.5 to 3.5 m) from the TV screen. Launch the Motion Control Environment 
Test, and then select Start. If the TV screen is reflecting light or there are objects moving in the 
background, the TV may not recognize the motion of your hand.
2. Face the TV camera, and follow the onscreen instructions. 
						

							6667
Activating motion control
MENU/123  MENU  System  Motion Control  Motion Control Try Now
Face the TV camera. Lower your hand to a comfortable position. Raise your hand with your index 
finger fully extended upwards, and then move your hand slowly to the left or right. When your hand 
is successfully recognized by the TV camera, motion control is activated and a pointer and motion 
control icons appear on the screen.
 "To deactivate motion control, move your hand out of the range of the TV camera. To reactivate it, simply 
move your hand toward the TV camera within 3 seconds.
 "Motion Control may be terminated if your index finger is not fully extended or you move it to fast.
Using the motion control tutorial
MENU/123  MENU  Support  Motion Control Tutorial Try Now
You can learn the basics of using motion control.
Learning motion control basics
The following actions are available:
 ●Moving the pointer
Move your hand to move the pointer accordingly.
 ●Selecting an item
Fold down and raise your index finger to select items. You can select a TV menu 
or run a function. Keeping your index finger lowered is like holding down a 
remote control button. 
						

							68
 ●Returning to the previous menu
Make a circle with your hand in the counterclockwise direction to return to the 
previous menu screen.
 ●Displaying the context-sensitive menu / Viewing broadcast information
Fold your index finger down for 1 second and then raise it. This action displays 
the context-sensitive menu./ While viewing broadcasts, fold down your index 
finger for 1 second, and then raise it at any blank point on the screen. You can 
view the broadcast information saved automatically for all channels.
Showing and hiding the animated motion guide
MENU/123  MENU  System  Motion Control  Animated Motion Guide Try Now
You can display an animated guide when motion control is activated.
 "When you run an app using motion control for the first time, the animated guide appears.
Selecting a pointer and adjusting pointer speed
MENU/123  MENU  System  Motion Control  Pointer Speed Try Now
Select a pointer and adjust its speed. 
						

							6869
Changing the motion control screens
Changing the motion control screens while viewing a broadcast
Direction Control ModeMotion Pointing Mode
 ●Direction Control Mode
If you run Motion Control for the first time by raising you hand while viewing a broadcast, the 
Direction Control Mode screen appears. The screen contains the Direction Control icon.
 ●Motion Pointing Mode
Move to the center of the Direction Control icon with your index finger, and then fold down your 
index finger. The four icons allowing you to run the main functions of your TV appear. To switch 
to the Direction Control Mode screen, move your hand out of the screen and then raise your 
index finger at the screen.
IconDescription
Select  and  to adjust the volume.
Select  and  to change the current channel.
Select the point at the center of this icon to change to the Motion Pointing Mode 
screen.
 Displays the On-Screen Remote.
Displays the channel list or information about the current program.
Launches Smart Hub.
Allows you to adjust the volume or select the speakers to use. 
						

							70
Displaying the Direction Control icon while not viewing a broadcast
To display the Direction Control icon while not viewing a broadcast, move to the center of the top side 
of the screen, and then fold down your index finger. After the Direction Control icon appears, move 
the focus to the  or , and then fold down your index finger to display the On-Screen Remote or 
launch Smart Hub. The Direction Control icon disappears when there is no user action for 5 or more 
seconds.
Displaying the hidden direction control icon while using various services when not viewing broadcasts 
						

							7071
Using Face Recognition
You can register your face using the TV camera, and sign in to your Samsung accounts using the 
face recognition function. Only one face can be registered per account. Depending on the ambient 
illumination level and/or shadows over a face, the TV may have difficulty recognizing it.
 "For more information, refer to "Read Before Using Voice, Motion, or Face Recognition."
 [When your TV is a 9000 series model, or your TV does not have the built-\
in camera with 
the SEK-3500 series models of UHD Evolution Kit installed, the TV must b\
e connected to 
an optional camera to use this function. The optional TV camera must be connected to the 
dedicated USB port at the back of the TV. The other USB ports do not support the TV camera 
or Face Recognition.
Registering your face to your Samsung account
MENU/123  MENU  Smart Hub  Samsung Account  Edit Profile
Select  after entering your account password. Select Take Picture, and then align your face within 
the red circle. When the circle turns green, the TV has registered your face.
 "To use this function, you must sign in to your Samsung account.
 "Your entire face must be visible to the camera. Avoid shadows over your face. Shadows prevent the camera 
from recognizing your face accurately.
 "Keep your expression as neutral as possible. Also, keep your mouth closed and as neutral as possible.
 "For more information, refer to "Creating a Samsung account." 
						

							72
Changing your login method to face recognition
MENU/123  MENU  Smart Hub  Samsung Account  Edit Profile
You can change your log in method to face recognition. To change the log in method, follow these 
steps:
1. Enter your password, and then select OK.
2. On the Edit Profile screen, select Sign-in Method. In the drop down list that appears, select 
Profile image selection and facial recognition (Medium security).
3. Select Done.
Signing in to a Samsung account using face recognition
MENU/123  MENU  Smart Hub  Samsung Account  Edit Profile
1. Select your Samsung account.
2. If you have set the Samsung account sign in option to Face Recognition, the TV automatically 
recognizes your face. If recognition fails, try again.
 "Your entire face must be visible to the camera. Avoid shadows over your face. Shadows prevent the 
camera from recognizing your face accurately.
 "Keep your expression as neutral as possible. Also, keep your mouth closed and as neutral as possible.
 "Once recognition succeeds, the TV logs in to Smart Hub automatically. If the TV recognizes two or 
more registered faces, a list of corresponding accounts appears. Select the appropriate account. If the 
TV detects an unregistered face, it displays “Unregistered” on the screen. 
						

							73
Viewing Digital Broadcast Information at a Glance
Using the guide
MENU/123  MENU  Broadcasting  Guide Try Now
You can check the program schedules and set up a Schedule Viewing from the Guide.
You can move through the Guide in 2 hour jumps in either direction by pressing the  or  button. 
You can only view programs scheduled after the current time.
You can select the buttons that appear at the bottom of the screen by using the POINTER button of 
the Samsung Smart Control.
 "The information in the Guide is for digital channels only. Analog channels are not supported.
 "To view the Guide, you must first set the TV's clock (MENU  System  Time  Clock).
To access the Guide functions after launching the Guide, press and hold the Enter button on the 
remote control. A pop-up window listing the following functions appears.
 ●Channel Filter
Filters the channels displayed in the Guide by the following categories: All, and Favorites 1 - 
Favorites 5.
 ●Schedule Manager
Displays the Schedule Manager.
 "For information about the Schedule Manager, refer to "Setting Up a Schedule Viewing."
 ●Edit Favorite Channels
Allows you to set a channel that you select in the Guide as a favorite.
 ●View details
Displays detailed information about a selected program. The program information may differ 
with the broadcast signal and may not be available at all for certain programs.
 –Select a current program on another channel, and then select View Details to Watch or 
Record the program.
 –Select an upcoming program, and then select View Details to set up a Schedule Viewing or 
Schedule Recording.
 "Recording is not supported in the U.S.A and Canada.
 "On the standard remote control, press the INFO button.
 "For more information about watching or Schedule Viewing, refer to "Setting Up a Schedule 
Viewing."
 "You can only view programs scheduled after the current time.
 "For more information on Schedule Recording, refer to "Recording Programs."
 ●Record
Starts instant recording of the selected program.
TV Viewing
You can enhance your viewing experience by using the specific functions. 
Get information on TV programs, edit schedule viewing, and use support functions. 
						

							74
Checking current program info
You can view information about, start instant recording of, or apply the Timeshift function to a show 
that you are watching by pressing the Enter button on the Program Info window. In addition, you can 
view information about upcoming programs by using the left or right directional buttons, or you can 
set up a Schedule Viewing or Schedule Recording for a program by pressing the Enter button on the 
Program Info window displayed for that program.
 "Recording is not supported in the U.S.A and Canada.
 "On the standard remote control, press the INFO button.
 "To view program info, you must first set the TV's clock (MENU  System  Time  Clock).
 "For more information on Schedule Recording, refer to "Recording Programs."
 "Program information may differ with the type of incoming signal and may not be available at all for certain 
programs.
 "For more information on Schedule Viewing, refer to "Setting Up a Schedule Viewing."
Changing the broadcast signal
MENU/123  MENU  Broadcasting  Antenna Try Now
You can choose the appropriate DTV mode for your viewing environment. Select Air or Cable. Air is 
suitable for homes equipped with a separate, over-the-air antenna. Cable is suitable for homes that 
have subscribed to a local cable-service or satellite-service provider.
 "You do not need to use this function if your TV is connected to a cable or satellite box.
Checking digital channel signal info and strength
MENU/123  MENU  Support  Self Diagnosis  Signal Information Try Now
You can check the digital channel's signal information and strength.
 "If your TV is attached to a separate, over-the-air antenna, you can use the signal strength information to 
adjust the antenna for increased signal strength and improved HD channel reception.
 "This function is only available for digital channels.