Samsung Syncmaster Nc190 User Manual

							Installing the Product2-9
2-9 Connecting USB
The   port supports up to USB 2.0.
Connect USB devices such as a mouse, keyboard and external storage devices (DSC (Digital Still Camera), MP3, external 
storage, etc.).
VMware View 4.6 or later is required. Data transfer rate may decrease depending on the network conditions.
 You can use a USB device such as a mouse, keyboard, Memory St ick, or external hard disk drive by connecting them to the  
 USB port of the monitor without connecting them to the PC.
 
 
						

							2-10Installing the Product
2-10 Connecting Headphones
Connect your headphones to the Headphone connection terminal.
 You may connect your headphones to the monitor.
 
 
						

							Installing the Product2-11
2-11 Connecting MIC
Connect the microphone cable to the MIC port on the monitor.
 You may connect your microphone to the monitor. 
 
						

							2-12Installing the Product
2-12 Kensington Lock
A Kensington Lock is an anti-theft device that enables users to lock the product so  that they can safely use it in public locations. 
Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information, 
refer to the User Manual supplied with the locking device. You have to purchase an additional locking device.
Locking the product
1. Insert the locking part of the locking device into the hole of the Kensington lock of the product ( ) and turn it in the locking  
direction ( ).
2. Connect the Kensington lock cable.
3. Tie the Kensington lock cable to a desk or heavy object.
 You can purchase the locking device from an electronics store or an online shop. 
 
						

							Using the product3-1
3 Using the product
3-1 What is a PC over IP?
• This monitor can decode and display the screen of the server PC encoded and transmitted through the network (LAN) as well 
as display the computer screen like a conventional monitor.  This monitor shows a far more improved performance than a 
normal RDP and has been designed to support a resolution of 1920*1080 pixels for high-quality graphic work.
• This monitor enables reinforced security because it is used by connecting it to a server PC and enabling you to access the  Internet, create documents and edit figures. In addition, this  new-concept monitor enables you to play music, videos and  
games by connecting an external input source device such as  DSC, MP3, external storage device etc. to the USB port.
• This monitor can be utilized  for various fields such as video conferencing and co-working by displaying the network display 
screen on another display device by connec ting the device through the DVI OUT port.
 
						

							3-2Using the product
3-2 Connect to the host PC using a LAN cable
 The host PC must have an IP address. 
After connecting the LAN and setting the IP address, you can view the host PC screen on the monitor. 
Use the USB port to connect an external storage  device (DSC, MP3, external storage, etc.).
Connecting one Host PC to many client device is possible only when virtualization solution like vmware is installed in Host 
PC.
 
 Host PC  Hub LAN Cable  Monitor
Connect the power cord to the power  terminal at the back of the monitor.
Connect the mouse and the keyboard to the USB ports.
Connect the LAN port on the back of the monitor and the hub.
Connect the hub and the LA N port of the host PC.
 
						

							Using the product3-3
3-3 Plug & Play
If you turn the power on after purchasing the product, a message regarding the optimal resolution setting appears on the screen.
Select a language and the optimal resolution.
 • The message appears up to 3 times if the resolution has not been set to the optimal resolution. 
▲ /▼  : You can select a language with these buttons.
MENU : If you press this bu tton, the message disappears.
 To set the resolution to the optimal resolution .
• Right-click over the Desktop and select Properties  from the pop-up menu.
• In the Settings tab, set th e resolution to the optimal 
resolution.
 
 
						

							3-4Using the product
3-4 Standard Signal Mode Table
 The LCD monitor has one optimal resolution for the best visual quality depending on the screen size due to the inherent 
characteristics of the panel, unlike for a CDT monitor.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setti ng 
the resolution to the optimal resolution of the product.
 
If the signal from the PC is one of the following standard signal  modes, the screen is set automatically. However, if the signal from 
the PC is not one of the following signal modes, a blank scree n may be displayed or only the Power LED may be turned on. 
Therefore, configure it as follows, referring  to the User Manual of the graphics card.
 
NC190
DISPLAY MODEHORIZONTAL 
FREQUENCY (KHZ)VERTICAL 
FREQUENCY  (HZ)PIXEL CLOCK (MHZ)SYNC POLARITY (H/ V)
IBM, 640 x 350 31.469 70.086 25.175 +/-
IBM, 720 x 400 31.46970.08728.322 -/+
MAC, 640 x 480 35.00066.66730.240 -/-
MAC, 832 x 624 49.72674.55157.284 -/-
MAC, 1152 x 870 68.68175.062100.000 -/-
VESA, 640 x 480 31.46959.94025.175 -/-
VESA, 640 x 480 37.50075.00031.500 -/-
VESA, 800 x 600 35.156 56.250 36.000 +/+
VESA, 800 x 600 37.879 60.317 40.000 +/+
VESA, 800 x 600 48.077 72.188 50.000 +/+
VESA, 800 x 600 46.875 75.000 49.500 +/+
VESA, 1024 x 768 48.36360.00465.000 -/-
VESA, 1024 x 768 56.47670.06975.000 -/-
VESA, 1024 x 768 60.023 75.029 78.750 +/+
VESA, 1152 x 864 67.500 75.000 108.000 +/+
VESA, 1280 x 800 49.70259.81083.500 -/+
VESA, 1280 x 800 62.795 74.934 106.500 -/+
VESA, 1280 x 960 60.000 60.000 108.000 +/+
VESA, 1280 x 1024 63.981 60.020 108.000 +/+
VESA, 1280 x 1024 79.976 75.025 135.000 +/+
 
						

							Using the product3-4
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle 
and the reciprocal of the hori zontal cycle is called the horizon tal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on  the screen tens of times every second so that humans can see the picture. This 
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
DISPLAY MODEHORIZONTAL 
FREQUENCY (KHZ)VERTICAL 
FREQUENCY  (HZ)PIXEL CLOCK (MHZ)SYNC POLARITY (H/ V)
IBM, 640 x 350 31.469 70.086 25.175 +/-
IBM, 720 x 400 31.46970.08728.322 -/+
MAC, 640 x 480 35.00066.66730.240 -/-
MAC, 832 x 624 49.72674.55157.284 -/-
MAC, 1152 x 870 68.68175.062100.000 -/-
VESA, 640 x 480 31.46959.94025.175 -/-
VESA, 640 x 480 37.86172.80931.500 -/-
VESA, 640 x 480 37.50075.00031.500 -/-
VESA, 800 x 600 35.156 56.250 36.000 +/+
VESA, 800 x 600 37.879 60.317 40.000 +/+
VESA, 800 x 600 48.077 72.188 50.000 +/+
VESA, 800 x 600 46.875 75.000 49.500 +/+
VESA, 1024 x 768 48.36360.00465.000 -/-
VESA, 1024 x 768 56.47670.06975.000 -/-
VESA, 1024 x 768 60.023 75.029 78.750 +/+
VESA, 1152 x 864 67.500 75.000 108.000 +/+
VESA, 1280 x 800 49.70259.81083.500 -/+
VESA, 1280 x 800 62.795 74.934 106.500 -/+
VESA, 1280 x 960 60.000 60.000 108.000 +/+
VESA, 1280 x 1024 63.981 60.020 108.000 +/+
VESA, 1280 x 1024 79.976 75.025 135.000 +/+
VESA, 1440 x 900 55.935 59.887 106.500 -/+
VESA, 1440 x 900 70.635 74.984 136.750 -/+
VESA, 1600 x 1200 75.000 60.000 162.000 +/+
VESA, 1680 x 1050 65.290 59.954 146.250 -/+
VESA, 1920 x 1080 67.500 60.000 148.500 +/+
NC240
 
						

							3-5Using the product
3-5 Installing the Device Driver
 If you install the device driver, you can set up the appropriate resolution and frequency for the product. The device driver is 
included on the CD-ROM supplied with the product. If the suppli ed drive file is corrupted, please visit the Samsung 
Electronics website(http://www.samsun g.com/), and download the driver.
 
1.Insert the driver installation  CD-ROM into the CD-ROM drive.
2. Click on Windows Driver.
3. Select the model of your pr oduct from the model list.
4. Complete the remaining installation steps according to the instructions displayed on the screen.
5. Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings. For more information, 
refer to the document about the Windows operating system.