Samsung SP P4251 Plasma Display User Manual

21
Connecting a DVD Player (480i, 480p)
This PDP displays the optimum picture in 720p mode.
Playing DVD
Audio Cable
Video Cable
Power Plug
Connect a Video Cable between the Y, Pb, Pr(COMPONENT1, 2) input jacks on the PDP 
and Y, P
b, Proutput jacks on the DVD player.
Connect a Audio Cable between the AUDIO L/R(COMPONENT1, 2) input jacks on the PDP
and the AUDIO output jacks on the DVD player.
Note
•Please be sure to match the color coded input terminals and cable jacks.
To Play DVD:
1. Turn on your PDP....

Connecting a DTV Receiver
(480p, 720p, 1080i)
This PDP displays the optimum picture in 720p mode.
22
Watching DTV
Video Cable
Audio Cable
DVI Cable
or
Power 
Plug
Connect the cable or antenna to the antenna input jack on the DTV.
Connect a Video cable between the Y, P
b, Pr(COMPONENT 1, 2) or DVI jack on the PDP
and the Y, P
b, Pr(COMPONENT) or DVI output jacks on the DTV receiver.
Connect an Audio cable between the COMPONENT 1, 2 (L/R AUDIO) or DVI (L/R AUDIO)
jacks on the  PDP and the AUDIO output...

PLASMA DISPLAY PANEL
Operation
Turning the PDP On and Off ..........................................................24
Plug & Play Feature ......................................................................26
Memorizing the Channels..............................................................29
Setting Up Your Remote Control ....................................................34
Viewing an External Signal Source ................................................36
BN68-00731A-00Eng_002-023  2004.6.3...

Turning the PDP On and Off
24
Turning the PDP On and Off
Press the POWER button on the remote control.
The PDP will be turned on and you will be ready to use its
features.
You can also use the POWER ( )button on the front of the
PDP.
Note
•If your PDP isn’t turned on when the power button is
pressed: Press the 
MODEbutton to check if the TV mode
has been chosen ( ). 
Viewing the Menus and Displays
Your PDP has a simple, easy-to-use menu system that appears on the PDP screen. This system makes it...

25
Displaying Status Information
Press the INFO button on the remote control. 
The PDP will display the Picture mode, Sound mode, MTS,
Caption, and Clock.Air          4
Mono
V-Chip
Picture      :     Custom
Sound       :    Custom
MTS       :    Stereo
Clock       :    12 : 00 am
CC
BN68-00731A-00Eng_024-065  2004.6.3  11:20 AM  Page 25 

26
Plug & Play Feature
When the television is initially powered ON, several basic customer settings proceed 
automatically and subsequently. The following settings are available.
1 
If the television is in Standby mode, press the
POWER button on the remote control.
2 
Select the appropriate language by pressing the 
▲or ▼button.
3 
Press the ENTER button to confirm your choice.
4 
Press the ENTER button.
➤ ➤The message Start Plug & Play is displayed and then the 
Language menu is automatically...

5
Select the correct signal source (Air, STD, HRC and
IRC) by pressing the ▲or ▼button, then press the 
ENTER button.
6 
To start the search, press the ENTER button.
7
Press the ENTER button. 
Press the œor √button to move to the Hour, Minute,
or am/pm.
Set the Hour, Minute, or am/pm by pressing the 
▲or ▼button.
Press the ENTER button. 
8
When it has finished, the message Enjoy your
watching is displayed, and the channels which  
have been stored can be viewed.
27
➤ ➤The search will end automatically....

28
Plug & Play Feature (continued)
If you want to reset this feature...
1 
Press the MENU button. Press the ▲or ▼button to
select “Setup”, then press the ENTER button. 
2 
Press the ▲or ▼button to select “Miscellaneous”,
then press the ENTER button.
3 
Press the ▲or ▼button to select “Plug & Play”.
Press the ENTER button.
4 
For further details on how to set, refer to the 
previous page.
Note
•Plug and Play can only be accessed in the TV mode.
Language : English√Time√Caption√Digital NR :...

29
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal
source that is connected to the PDP (i.e., an antenna or a cable system).
1 
Press the MENU button. Press the ▲or ▼button to
select “Channel”, then press the ENTER button.
2 
Press the ENTER button to select “Air/CATV”.
3 
Press the ▲or ▼button to select  “Air”, “STD”,
“HRC” or “IRC”, then press the ENTER button. 
• If you are connected to an antenna, leave “Air”...

30
Storing Channels in Memory (Automatic Method)
1
First, select the correct signal source (Air, STD, HRC 
and IRC). See steps on previous page.
Press the MENU button. Press the 
▲or ▼button to 
select “Channel”, then press the ENTER button. 
2
Press the ▲or ▼button to select “Auto Program”,
then press the ENTER button.
3
Press the ENTER button. 
The PDP will begin memorizing all of the available 
channels. 
After all the available channels are stored, the Auto
program menu reappears. 
Press the ENTER...