Samsung SP P4251 Plasma Display User Manual

41
1 
Press the MENU button. Press the ▲or ▼button to
select “Picture”, then press the ENTER button.
2 
Press the ENTER button to select “Mode”.
3 
Press the ▲or ▼button to select “Dynamic”, 
“Standard”, “Movie”, “Custom” picture setting, 
then press the ENTER button.
• You can select “Custom”, “Entertain”, “Internet”,  
or “Text” in PC/DVI mode.
4
Press the MENU button to exit. 
•Choose Dynamic for viewing the TV during the day or 
when there is bright light in the room.
•Choose Standard for the...

42
Selecting the Color Tone
1 
Press the MENU button. Press the ▲or ▼button to
select “Picture”, then press the ENTER button.
2 
Press the ▲or ▼button to select “Color Tone”, then
press the ENTER button.
3 
Press the ▲or ▼button to select “Cool2”, “Cool1”,
“Normal”, “Warm1” or “Warm2”,  then press the 
ENTER button.
•You can select “Custom”, “Cool”, Normal” or 
“Warm” in PC mode.
•You can select “Cool”, “Normal” or “Warm” 
in DVI mode.
4
Press the MENU button to exit.
Mode : Custom√Custom√Color Tone :...

DNIe (Digital Natural Image engine)
Samsung’s New Technology brings you more detailed images with contrast,
white enhancement and 3D noise reduction.
1 
Press the MENU button. Press the ▲or ▼button to
select “Picture”, then press the ENTER button.
2 
Press the ▲or ▼button to select “DNIe”, then press
the ENTER button. 
3 
Press the ▲or ▼button to select “On”, “Off” or
“Demo”, then press the ENTER button.
•On : Switches on the DNIe mode.
•Off : Switches off the DNIe mode.
•Demo : The screen before...

44
Changing the Screen Size
Screen size selection depends on the type of video input (DVD, PC etc.).
1 
Press the MENU button. Press the ▲or ▼button to
select “Picture”, then press the ENTER button.
2 
Press the ▲or ▼button to select “Size”, then press
the ENTER button.
3 
Press the ▲or ▼button to select the screen size you
want, then press the ENTER button.
4 
Press the MENU button to exit.
Note
•If you watch a still image or the 4:3 (Normal) mode for a long time (over 2 hours), an image may
be burned...

45
Notes
•In TV, VIDEO, S-VIDEO and Component (480i) modes, all screen modes can be selected.
(16:9 
➞Panorama ➞Zoom ➞4:3).
•In PC/DVI mode, only 16:9 & 4:3 modes can be selected.
•In Component (480p, 720p. 1080i) modes, Panorama mode can’t be selected.
•In Component (480p, 720p. 1080i) modes, you can move the picture on screen by pressing
the ▲or ▼button. (All screen modes)
•Changing the screen size to Normal, or Zoom during PIP mode will cause the PIP window to
disappear.
16:9(W 16:9(W
ide) ide)
16:9...

46
Still
Press the STILL button on the remote control to freeze a 
moving picture. Press again to cancel.
Freezing the Picture
BN68-00731A-00Eng_024-065  2004.6.3  11:20 AM  Page 46 

Selecting the PIP Screen
1 
Press the MENU button. Press the ▲or ▼button to
select “Picture”, then press the ENTER button. 
2 
Press the ▲or ▼button to select “PIP”, then 
press the ENTER button. 
3
Press the ENTER button, then press the ▲or ▼
button to select “On”. The PIP image will appear in 
the corner of the screen.
•Pressing the ▲or ▼button will alternate between 
“On” and “Off”.
Note
•Check if the V-Chip Lock (refer to page 98) is  
ON if the PIP On/Off will not function. PIP does  
not function...

Selecting an External Signal
You can use PIP to view a signal from an external source, such as a VCR.
1 
Press the MENU button. Press the ▲or ▼button to
select “Picture”, then press the ENTER button. 
2 
Press the ▲or ▼button to select “PIP”, then press
the ENTER button.
3 
Press the ▲or ▼button to select “Source”, then
press the ENTER button.
4
Press the ▲or ▼button to cycle through all of the
available signal sources: 
“TV”, “AV1”, “AV2”, “AV3”, “S-Video1”,
“S-Video2”, “Component1”, “Component2”, 
“PC”...

49
Swapping the Contents of the PIP Image and Main Image
1 
Press the MENU button. Press the ▲or ▼button to
select “Picture”, then press the ENTER button. 
2 
Press the ▲or ▼button to select “PIP”, then press
the ENTER button.
3 
Press the ▲or ▼button to select “Swap”, then
press the ENTER button.
• The image in the PIP window will appear on the 
main screen, and vice versa.
4 
Press the MENU button to exit.
➤ ➤Quick way to access swapping: Just press the “SWAP” button under
the cover of the remote...

50
Changing the Size of the PIP Window
1 
Press the MENU button. Press the ▲or ▼button to
select “Picture”, then press the ENTER button. 
2 
Press the ▲or ▼button to select “PIP”, then press
the ENTER button.
3
Press the ▲or ▼button to select “Size”, then press
the ENTER button.
4 
Press the ▲or ▼button to select option you want,
then press the ENTER button.
5
Press the MENU button to exit.
➤ ➤Quick way to access PIP size: Just press the “SIZE” button under
the cover of the remote control.
Mode :...