Samsung SP P4251 Plasma Display User Manual

31
Adding and Erasing Channels (Manual Method)
First, press the CH  or CH  button or the number buttons
to select the channel you want to add or delete.
1 
Press the MENU button. Press the ▲or ▼button to
select “Channel”, then press the ENTER button.
2 
Press the ▲or ▼button to select “Add/Delete”,
then press the ENTER button.
Repeatedly pressing ENTER button will alternate 
between “Add” and “Delete”.
Press the CH  or CH  button to change 
channels you want to add or delete. 
3 
Press the MENU button to...

32
To View Memorized Channel (PIP Mode)
1
Press the MENU button. Press the ▲or ▼button to
select “Channel”, then press the ENTER button.
2
Press the ▲or ▼button to select “Scan”, then press
the ENTER button.
Only the memorized channels are chosen. 
3
Press the MENU button to stop.
Air/CATV : Air√
Auto Program√
Add/Delete√
Fine Tune√
LNA : On√
Scan√
Channel TV
MoveEnterReturn
Scan
Return
Air     4
➤ ➤When Channel scan starts, PIP mode will be activated automatically.
The screen will remain in PIP mode...

33
Changing Channels
Using the Channel Buttons
Press the CH or CH button to change channels.
When you press the CH or CH button, the PDP changes channels 
in sequence. You will see all the channels that the PDP has memorized.
(The PDP must have memorized at least three channels.) 
You will not see channels that were either erased or not memorized.
Directly Accessing Channels
Press the number buttons to go directly to a channel. For example, to select
channel 27, press “2” then “7”. The TV will change...

34
Setting Up Your Remote Control
This PDPs remote control can operate almost any VCR, cable box or DVD. After it has been set up
properly, your remote control can operate in four different modes :TV , VCR, Cable, DVD or STB. 
Pressing the corresponding button on the remote control allows you to switch between these modes,
and control whichever piece of equipment you choose.
Note :
●The remote control may not be compatible with all DVD Players, VCRs, Cable boxes.   
●The remote control can only operate...

35
Remote Control Codes
VCR Codes
Cable Box Codes
DVD Codes
BN68-00731A-00Eng_024-065  2004.6.3  11:20 AM  Page 35 

36
Setting the Signal Source
1
Press the MENU button. Press the ENTER button to
select “Input”.
2
Press the ENTER button to select “Source List”.
3 
Press the ▲or ▼button to select signal source, then
press the ENTER button.
4 
Press the MENU button to exit.
Note
•When you connect equipment to the PDP, you can choose between the following sets of jacks: 
AV1, AV2, AV3, S-Video1, S-Video2, Component1, Component2, Monitor Out, PC or DVI on the
PDP’s rear panel.
Viewing an External Signal Source
Use the...

Assigning Names to External input mode
1
Press the MENU button. Press the ENTER button to
select “Input”.
2 
Press the ▲or ▼button to select “Edit Name”, then
press the ENTER button.
3 
Press the ENTER button.
Press the ▲or ▼button to select external device, 
then press the ENTER button. 
• You can select the VCR, DVD, Cable STB, HD STB,
Satellite STB, AV Receiver, DVD Receiver, Game, 
Camcorder, DVD Combo, DHR or PC.  
• Set other signal sources (AV2, AV3, S-Video1, 
S-Video2, Component1, Component2, PC...

BN68-00731A-00Eng_024-065  2004.6.3  11:20 AM  Page 38 

PLASMA DISPLAY PANEL
Picture Control
Customizing the Picture ................................................................40
Using Automatic Picture Settings ....................................................41
Selecting the Color Tone ................................................................42
DNIe (Digital Natural Image engine)  ............................................43
Changing the Screen Size ............................................................44
Freezing the Picture...

Customizing the Picture
You can use the on-screen menus to change the Contrast, Brightness, Sharpness, Color, 
and Tint settings of your PDP.
40
1 
Press the MENU button. Press the ▲or ▼button to
select “Picture”, then press the ENTER button.
2
Press the ▲or ▼button to select “Custom”, then
press the ENTER button.
You will also see the items “Contrast”, “Brightness”,
“Sharpness”, “Color” and “Tint”.
3
Press the ▲or ▼ button to select the item you wish
to change, then press the ENTER button. 
Press the...