Samsung SP P4251 Plasma Display User Manual

							21
Connecting a DVD Player (480i, 480p)
This PDP displays the optimum picture in 720p mode.
Playing DVD
Audio Cable
Video Cable
Power Plug
Connect a Video Cable between the Y, Pb, Pr(COMPONENT1, 2) input jacks on the PDP 
and Y, P
b, Proutput jacks on the DVD player.
Connect a Audio Cable between the AUDIO L/R(COMPONENT1, 2) input jacks on the PDP
and the AUDIO output jacks on the DVD player.
Note
•Please be sure to match the color coded input terminals and cable jacks.
To Play DVD:
1. Turn on your PDP.
2. Press the SOURCE button to select “COMPONENT1” or “COMPONENT2”.
3. Turn on your DVD player, insert a DVD disc and press the Play button.
• For an explanation of Component video, see your DVD owner’s instructions.
How to Connect
1
2
PDP DVD Player
BN68-00731A-00Eng_002-023  2004.6.3  1:2 PM  Page 21 
						

							Connecting a DTV Receiver
(480p, 720p, 1080i)
This PDP displays the optimum picture in 720p mode.
22
Watching DTV
Video Cable
Audio Cable
DVI Cable
or
Power 
Plug
Connect the cable or antenna to the antenna input jack on the DTV.
Connect a Video cable between the Y, P
b, Pr(COMPONENT 1, 2) or DVI jack on the PDP
and the Y, P
b, Pr(COMPONENT) or DVI output jacks on the DTV receiver.
Connect an Audio cable between the COMPONENT 1, 2 (L/R AUDIO) or DVI (L/R AUDIO)
jacks on the  PDP and the AUDIO output jacks on the DTV receiver.
Note
•Please be sure to match the color coded input terminals and cable jacks.
To Watch DTV:
1. Turn on your PDP.
2. Press the SOURCE button to select “COMPONENT1”, “COMPONENT2” or “DVI”.
3. Turn on your DTV receiver.
• For an explanation of Component video, see your DTV receiver owner’s instructions.
How to Connect
1
2
3
Use a DVI-D connection cable. (sold separately)
PDPDTV Receiver
BN68-00731A-00Eng_002-023  2004.6.3  1:2 PM  Page 22 
						

							PLASMA DISPLAY PANEL
Operation
Turning the PDP On and Off ..........................................................24
Plug & Play Feature ......................................................................26
Memorizing the Channels..............................................................29
Setting Up Your Remote Control ....................................................34
Viewing an External Signal Source ................................................36
BN68-00731A-00Eng_002-023  2004.6.3  11:12 AM  Page 23 
						

							Turning the PDP On and Off
24
Turning the PDP On and Off
Press the POWER button on the remote control.
The PDP will be turned on and you will be ready to use its
features.
You can also use the POWER ( )button on the front of the
PDP.
Note
•If your PDP isn’t turned on when the power button is
pressed: Press the 
MODEbutton to check if the TV mode
has been chosen ( ). 
Viewing the Menus and Displays
Your PDP has a simple, easy-to-use menu system that appears on the PDP screen. This system makes it 
convenient and fast to use features on the PDP. Your PDP also lets you display the status of many of your
PDP’s features.
Viewing the Menus
1 
With the power on, press the MENU button on the
remote control. The main menu appears on the screen.
The Input menu is selected.
2
Press the ▲or ▼buttons to move to items in the menu.
Press the œ/
√/
ENTER buttons to display, change, or 
use the selected items.
Press the ENTER ( ) button to enter items in the menu. 
On screen menus disappear from the screen 
automatically after about thirty seconds, or you can 
press the MENU or EXIT button on your remote control 
to exit the menu.
Source List : TV√
Edit Name√
Input TV
MoveEnterReturn
BN68-00731A-00Eng_024-065  2004.6.3  11:20 AM  Page 24 
						

							25
Displaying Status Information
Press the INFO button on the remote control. 
The PDP will display the Picture mode, Sound mode, MTS,
Caption, and Clock.Air          4
Mono
V-Chip
Picture      :     Custom
Sound       :    Custom
MTS       :    Stereo
Clock       :    12 : 00 am
CC
BN68-00731A-00Eng_024-065  2004.6.3  11:20 AM  Page 25 
						

							26
Plug & Play Feature
When the television is initially powered ON, several basic customer settings proceed 
automatically and subsequently. The following settings are available.
1 
If the television is in Standby mode, press the
POWER button on the remote control.
2 
Select the appropriate language by pressing the 
▲or ▼button.
3 
Press the ENTER button to confirm your choice.
4 
Press the ENTER button.
➤ ➤The message Start Plug & Play is displayed and then the 
Language menu is automatically displayed.
➤ ➤The message Check antenna input is displayed.
Language
MoveEnterSkip
English
Français
Español
Plug & Play
EnterSkip
Check antenna input.
Start Plug & Play.
Start
Plug & Play
EnterExit
BN68-00731A-00Eng_024-065  2004.6.3  11:20 AM  Page 26 
						

							5
Select the correct signal source (Air, STD, HRC and
IRC) by pressing the ▲or ▼button, then press the 
ENTER button.
6 
To start the search, press the ENTER button.
7
Press the ENTER button. 
Press the œor √button to move to the Hour, Minute,
or am/pm.
Set the Hour, Minute, or am/pm by pressing the 
▲or ▼button.
Press the ENTER button. 
8
When it has finished, the message Enjoy your
watching is displayed, and the channels which  
have been stored can be viewed.
27
➤ ➤The search will end automatically. Channels are sorted and stored in
an order which reflects their position in the frequency range (with
lowest first and highest last).
When it has finished, the Clock Set menu is displayed.
➤ ➤To stop the search before it has finished or return to normal
viewing, press the MENU button.
Air/CATV
Air
STD
HRC
IRC
Auto Program
EnterSkip
Start
Auto Program
EnterSkip
Air     30
Stop
MoveEnterSkip
Enjoy your watching.
Clock
Skip
Hour        Minute      am/pm
MoveAdjust
1200am
BN68-00731A-00Eng_024-065  2004.6.3  11:20 AM  Page 27 
						

							28
Plug & Play Feature (continued)
If you want to reset this feature...
1 
Press the MENU button. Press the ▲or ▼button to
select “Setup”, then press the ENTER button. 
2 
Press the ▲or ▼button to select “Miscellaneous”,
then press the ENTER button.
3 
Press the ▲or ▼button to select “Plug & Play”.
Press the ENTER button.
4 
For further details on how to set, refer to the 
previous page.
Note
•Plug and Play can only be accessed in the TV mode.
Language : English√Time√Caption√Digital NR : On√V-Chip√Miscellaneous√
PC√Color Weakness : Off√
Setup TV
MoveEnterReturn
Melody : On√
Plug & Play√
Blue Screen : Off√
Miscellaneous TV
MoveEnterReturn
Start Plug & Play.
Start
Plug & Play
ReturnEnter
BN68-00731A-00Eng_024-065  2004.6.3  11:20 AM  Page 28 
						

							29
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal
source that is connected to the PDP (i.e., an antenna or a cable system).
1 
Press the MENU button. Press the ▲or ▼button to
select “Channel”, then press the ENTER button.
2 
Press the ENTER button to select “Air/CATV”.
3 
Press the ▲or ▼button to select  “Air”, “STD”,
“HRC” or “IRC”, then press the ENTER button. 
• If you are connected to an antenna, leave “Air” 
displayed. If you connected cable, press the 
▲or ▼button to the display the type of cable 
system: “STD”, “HRC” or “IRC”.
(If you are not sure which type of cable system you 
have, contact your cable company).
4 
Press the MENU button to exit.
Note
•STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to
identify the type of cable system that exists in your particular area. At this point the signal source
has been selected. Proceed to “Storing Channels in Memory” (Next page).
Memorizing the Channels
Your PDP can memorize and store all of the available channels for both “off-air”
(antenna) and cable channels. After the available channels are memorized, use the
CH  and CH  buttons to scan through the channels. This eliminates the need to
change channels by entering the channel digits. There are three steps for memorizing
channels: selecting a broadcast source, memorizing the channels (automatic) and
adding and deleting channels (manual).
Air/CATV : Air√
Auto Program√
Add/Delete√
Fine Tune√
LNA : On√
Scan√
Channel TV
MoveEnterReturn
Air/CATV :Air
Auto Program
Add/Delete
Fine Tune
LNA : On
Scan
Channel TV
MoveEnterReturn
Air
STD
HRC
IRC
Air/CATV :Air
Auto Program
Add/Delete
Fine Tune
LNA : On
Scan
Channel TV
MoveEnterReturn
Air
STD
HRC
IRC
BN68-00731A-00Eng_024-065  2004.6.3  11:20 AM  Page 29 
						

							30
Storing Channels in Memory (Automatic Method)
1
First, select the correct signal source (Air, STD, HRC 
and IRC). See steps on previous page.
Press the MENU button. Press the 
▲or ▼button to 
select “Channel”, then press the ENTER button. 
2
Press the ▲or ▼button to select “Auto Program”,
then press the ENTER button.
3
Press the ENTER button. 
The PDP will begin memorizing all of the available 
channels. 
After all the available channels are stored, the Auto
program menu reappears. 
Press the ENTER button to stop.
4
Press the MENU button to exit.
Note
•The PDP automatically cycles through all of the available channels and stores them in memory.
This takes about one to two minutes.
➤ ➤Quick way to access the Automatic Channel Setting: Just press the
“AUTO PROG.” button on the remote control.
Air/CATV : Air√
Auto Program√
Add/Delete√
Fine Tune√
LNA : On√
Scan√
Channel TV
MoveEnterReturn
Air/CATV : Air√
Auto Program√
Add/Delete√
Fine Tune√
LNA : On√
Scan√
Channel TV
MoveEnterReturn
Auto Program
EnterReturn
Start
BN68-00731A-00Eng_024-065  2004.6.3  11:20 AM  Page 30