Samsung Series 7 User Guide

81
Using MDC
3
3 Using MDC
3.3.7 Main Screen Layout
 Menu BarChange the status of a display device or the properties of the program.
 Device Category View a list of connected displa
y devices or device groups.
 Schedule Category View a list of schedules for display devices.
 Set List Select the display device you want to adjust.
 Modify the Set List Add, edit, regroup or delete sets.
 Help Topics Display help topics for the program.
4
3
2
16
5
1
2
3
4
5
6 

82
Using MDC
3
3 Using MDC
3.3.8 Menus
You can power on or off a selected device or change the input source or volume of the device.
Choose display devices from the list of sets, and select the  Home tab. 
 Home
Select an item and change the corresponding setting.
Power
zOn: Power on a selected display.
zOff : Power off a selected display.
Input
zInput Source : Change the input source.
 †Input sources available can vary depending on the Display Device Models.
†The input source can be changed only for...

83
Using MDC
3
3 Using MDC
 Alert
zFault Device
†This menu shows a list of display devices which have following errors - fan error, temperature 
error, brightness sensor error, or lamp error.
Select a display device from the list. The Repair button will be enabled. Click the refresh button 
to refresh the error status of the display device. The recovered display device will disappear 
from the  Fault Device List. 
zFault Device Alert
†Display device in which error is detected will be reported by email....

84
Using MDC
3
3 Using MDC
3.3.9 Screen Adjustment
The screen settings (contrast, brightness, etc.) can be adjusted. 
Choose display devices from the list of sets, and select the  Picture tab.
Custom
Select an item and change the corresponding screen setting.
 zColor and Tint are not available if the input source is  PC.
zRed , Green , Blue and PC Screen Adjustment  are not available if the input source is  Video.
zColor, Tint, Color Tone , Color Temp , Red, Green , Blue and PC Screen Adjustment  are not...

85
Using MDC
3
3 Using MDC
Green
zCustomize the intensity of green color for the selected display device.
Blue
zCustomize the intensity of blue co lor for the selected display device.
Options
Dynamic Contrast
Adjust the Dynamic Contrast for the selected display device. 
Gamma Control
Change the gamma value for the selected display. 
Auto Motion Plus
This option is used to view dynamic images.
zOff : Disable the  Auto Motion Plus  function.
zClear: Set the level of  Auto Motion Plus  to clear. This mode...

86
Using MDC
3
3 Using MDC
Size
Picture Size
Adjust the screen size for the selected display device. 
The  Detail item will be disabled if  Picture Size is set to a mode that does not support detailed 
configuration.
The -/+ buttons can be used to adjust  Zoom.
The screen can be relocated using the up/down/left/right buttons.
Detail
You can view details of the selected screen size.
PC Screen Adjustment
Frequency adjustment or fine-tuning is available by using the -/+ buttons in  Coarse or Fine .
To...

87
Using MDC
3
3 Using MDC
3.3.10 Sound Adjustment
You can change the sound settings. 
Choose display devices from the list of sets, and select the  Sound tab.
 The Bass  or Treble  item will be disabled if the item  is not supported by the selected set. 
Bass
Adjust the bass for the selected display. 
Treble
Adjust the treble for the selected display. 
Balance(L/R)
Adjust the volume of the left and right speakers of the selected display device. 
SRS TS XT
Enable or disable the  SRS TS XT effect for the...

88
Using MDC
3
3 Using MDC
3.3.11 System Setup
Choose display devices from the list of sets, and select the  System tab. 
Video Wall
The Video Wall  function can be used to display part of a whole picture or repeat the same picture on 
each of connected multiple display devices.
 Video Wall  is enabled only when devices are in the group. 
Video Wall
Enable or disable  Video Wall.
Format
Select the format to display the split screen.
VMM






























/BUVSBM 

89
Using MDC
3
3 Using MDC
H
Select the number of ho
rizontal display devices.
A maximum of 15 displays can be arranged in a row.
 A maximum of 6 can be assigned to V if 15 is assigned to H. 
V
Select the number of vertical display devices. 
A maximum of 15 displays can be arranged in a row.
 A maximum of 6 can be assigned to V if 15 is assigned to H. 
Screen Position
View the layout of displays (configured by the screen divider) or change the layout as required.
Screen Position  and Preview are enabled...

90
Using MDC
3
3 Using MDC
PIP
Basic information required to adjust PIP will appear in the menu screen.
 zPIP will be disabled when  Video Wall is ON.
zNote that Picture Size  is disabled when PIP is ON . 
PIP Size
View the PIP Size  of the current display. 
PIP Source
Select a PIP input source.
Sound Select
Select and enable the sound from either the primary screen or secondary screen.
Channel
The channel can be changed if  PIP Source is TV.