Samsung Series 7 User Guide

61
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.3 Connecting an External Monitor
 zThe Loopout function can be used to duplicate the screen of the primary display. 
Connect [DVI OUT] on the primary display to [DVI IN] or [HDMI IN] on another display.
zUp to Full HD resolution can be supported. Compatible input sources include DVI IN, DP IN and 
HDMI IN. Multiple monitors that are daisy-chained have a limit to the connectable monitors.
zThe [DVI OUT] port on this product...

62
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.4 Connecting to a Video Device
zDo not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
zYou can connect a video device to the product using a cable.
 †Connecting parts may differ in different products.
†After connecting a source device, press the SOURCE button on the remote control and 
select the connected source device.
 
2.4.1...

63
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.4.3 Connection Using an HDMI-DVI Cable
 zAudio will not be enabled if the product is conn ected to a video device using an HDMI-DVI cable. 
To resolve this, additionally connect an audio cable to the audio ports on the product and video 
device. When you connect a video device to  the product using an HDMI-DVI cable, set Edit Name 
to  DVI Device to access video and audio content stored on the video device.
zSupported...

64
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
Using an HDMI cable or HDMI to DVI Cable (up to 1080p)
zFor better picture and audio quality, connect to a digital device using an HDMI cable.
zAn HDMI cable supports digital video and audio signals, and does not require an audio cable.
†To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and 
audio cables.
zThe picture may not display normally (if at all) or the audio may not work if an...

65
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.4.5 Connecting to an Audio System
2.4.6 Connecting to an Antenna
The initial settings process runs automatically when the product is turned on for the first time after 
purchase.
 Take extra care to ensure the wires inside the cable do not bend.
 
AUDIO OUT
ANT IN
VHF/UHF Antenna 

66
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.5 Connecting the network box (Sold separately)
2.5.1 MagicInfo
To use MagicInfo , a network box (sold separately) must be connected to the product.
 For details on how to connect to a network box, refer to the user's manual provided with the network 
box upon purchase.
  zTo change the MagicInfo settings, run "MagicinfoSetupWizard" on the desktop.
zFor details on how to use MagicInfo, refer to the DVD provided...

67
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
3Select the default application you want to run when MagicInfo starts.
4Enter the IP information.
MagicInfo Setup Wizard - v.1.12Select Application - step 1
MagicInfo Pro (LAN, WAN based version)
MagicInfo-i Premium (Web-based version)
Select Later
< Back(B) Next(N) > Finish Cancel
MagicInfo Setup Wizard - v.1.12 Select TCP/IP - step 2
Obtain an IP address automatically
Use the following IP address:
IP address:
Subnet mask:...

68
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
5Select a language. (The default language is English.)
6Select a display mode.
MagicInfo Setup Wizard - v.1.12Select Language -step 3
Select the language you want to install on the system for menus and 
dialogs.
Current Language    :    Engilsh
German
English
French
Italian Chinese [Traditional]
Japanese
Korean
Russian
Swedish
Turkish
Chinese [Simplified]
Portuguese
< Back(B) Next(N) > Finish Cancel
MagicInfo Setup Wizard -...

69
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
7Double-check the settings you have just configured.
 zIf the execution icon does not appear, double-click the  MagicInfo icon on the desktop. The icon 
will appear at the bottom right of the screen.
zFor further details on how to use  MagicInfo, refer to the MagicInfo Lite Edition software CD 
provided with the network box.
 
MagicInfo Setup Wizard - v.1.12
Setup Information
1. Application :     MagicInfo Pro [LAN,WAN based...

70
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.6 Changing the Input source
2.6.1 Source
 MENU []   Media  Source   ENTER [ ]
Source  allows you to select a variety of sources and change source device names.
Source
You can display the screen of a source device connected to the product. Select a source from Source 
List to display the screen of the selected source.
 Refer to page 144 for details about the  Source menu. 
 The input source can also be changed by using the...