Samsung Series 7 User Guide

111
Screen Adjustment
4
4 Screen Adjustment
4.4 Auto Adjustment
 MENU []   Picture  Auto Adjustment   ENTER [ ]
Adjust frequency values/positions and fine tune the settings automatically.
 This option is available when the input source is  PC. 
4.5 Using the 3D function (ME75B model only)
 MENU  []   Picture  3D   ENTER []
4.5.1 3D Mode
This exciting new feature enables you to view 3D content. In order to fully enjoy this feature, you must 
purchase a pair of Samsung 3D Active Glasses to view 3D video....

112
Screen Adjustment
4
4 Screen Adjustment
 †If you want to feel the 3D effect fully, please wear the 3D Active Glasses first, and then select 
3D Mode from the list below that provides the best 3d viewing experience.
†When watching 3D images, turn on 3D Active Glasses. 
 †Some file format may not supported the “2D   3D.”
†“Side by Side” and “Top & Bottom” are available when the resolution is 720p, 1080i and 
1080p in HDMI and USB mode or when set to  PC and the PC is connected through an HDMI 
/ DVI...

113
Screen Adjustment
4
4 Screen Adjustment
 If a 3D failure occurs due to a 3D information error, set 3D Auto View to Off and manually select a 
3D Mode  using the corresponding menu.
 
z3D Optimize : The overall adjustment of 3D effect.
 Support resolution (16:9 only)
 
Resolution supported for HDMI PC mode
The resolution for HDMI PC mode is optimized to 1920 x 1080 input.
An input resolution other than 1920 x 1080 may not  be displayed properly in 3D display or full screen 
mode.
How to watch the 3D...

114
Screen Adjustment
4
4 Screen Adjustment
Supported formats and operating specifications for Standard HDMI 3D
 The 3D formats indicated below are recommended by the HDMI association and must be supported.
 
For the Standard HDMI 3D format with 24Hz, the product is optimized as follows.
zJudder Reduction
 Display Mode: When  Auto Motion Plus is set to Smooth or Custom , you can 
watch a smooth picture without judder.
Before using 3D function
 z3D Mode  is set to its memorized configuration value...

115
Screen Adjustment
4
4 Screen Adjustment
4.6 Advanced Settings
 MENU []   Picture  Advanced Settings   ENTER [ ]
All Advanced Settings  are available in the Standard and Movie  modes. To use, select an option using 
the up and down arrow keys, and then press [ ]. Use the arrow keys to change the value or setting, 
and then press [ ].
 In PC  mode, you can only make changes to  Gamma and White Balance . 
4.6.1 Black Tone
Select the black level to adjust the screen depth.
zOff / Dark  / Darker  /...

116
Screen Adjustment
4
4 Screen Adjustment
4.6.4 Gamma
Adjust the primary color intensity.
4.6.5 Expert Pattern
Use the Expert Pattern  function to calibrate the picture. If the OSD menu disappears or a menu other 
than the Picture menu is opened, the product saves the calibration and the  Expert Pattern screen 
disappears.
zOff
Turns the  Expert Pattern  function off.
zPattern1
This test screen demonstrates the effect of the display settings on shades of grey and black.
zPattern2
This test screen...

117
Screen Adjustment
4
4 Screen Adjustment
4.6.9 10p White Balance (Off / On)
Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.
zInterval: Select interval to adjust.
zRed: Adjust the red level.
zGreen : Adjust the green level.
zBlue: Adjust the blue level.
zReset: Resets the  10p White Balance  to its default settings.
 zAvailable when the Picture Mode is set to Movie  and when the external input is set to all input.
zSome external devices may not support...

118
Screen Adjustment
4
4 Screen Adjustment
4.7 Picture Options
 MENU []   Picture  Picture Options   ENTER [ ]
Select an option using the   and   arrow keys, and the press [ ]. Use the arrow keys to change the 
setting, and then press [ ].
 In PC  mode, you can only make changes to the  Color Tone. 
4.7.1 Color Tone
zOff / Cool  / Standard /  Warm1 / Warm2
 zWarm1  or Warm2  will be deactivated when the Picture Mode  is Movie .
zSettings can be adjusted and stored for each external device connected to...

119
Screen Adjustment
4
4 Screen Adjustment
4.7.3 Digital Noise Filter
If the broadcast signal received by your product is weak, you can activate the Digital Noise Filter feature 
to reduce any static and ghosting that may appear on the screen.
zOff  / Low  / Medium  / High  / Auto  / Auto Visualization
zAuto Visualization : When changing analog channels, displays signal strength.
†Only available for analog channels.
†When bar is green, is that the best possible signal.
 When the signal is weak, try all...

120
Screen Adjustment
4
4 Screen Adjustment
4.7.7 Auto Motion Plus
Removes blur and judder from scenes with larger amounts of rapid movement to provide a clearer 
picture.
 The menu names may vary depending on the country. 
This feature can be used to view fast moving scenes.
zOff : Switches Auto Motion Plus  off.
zClear : Sets  Auto Motion Plus  to Clear  (suitable for viewing moving images clearly) mode.
zStandard  : Sets Auto Motion Plus  to Standard  mode.
zSmooth : Sets Auto Motion Plus  to Smooth...