Samsung Series 7 User Guide

1417 Network
7 
Network
7.1 Network Setting
7.1.1 Connecting to a Wired Network
There are three ways to attach your product to your LAN using cable.
zYou can attach your product to your LAN by connecting the LAN port on the back of your product to 
an external modem using a LAN cable. See the diagram below.
zYou can attach your product to your LAN by connecting the LAN port on the back of your product to 
an IP Sharer which is connected to an external modem. Use LAN cable for the connection. See the...

142
Network
7
7 Network
access the Internet so you do not have to enter them manually. Most home networks are Dynamic 
Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must 
enter the IP address, subnet mask, gateway, and DNS values manually on your product Cable 
Setup Screen when you set up the network connection. To get the IP address, subnet mask, 
gateway, and DNS values, contact your Internet Service Provider (ISP). If you have a Windows...

143
Network
7
7 Network
Automatic Network Settings
Use the Automatic Network Settings when connecting your product to a network that supports DHCP. 
To set up your product cable network connection automatically, follow these steps.
How to set up automatically
1Go to the  Network Settings  screen.
2Select Wired, press [ ], and then press [ ] again.
3The network test screen appears and verifies the network connection. When the connection has 
been verified, the “Internet is connected successfully.” message...

144
Network
7
7 Network
 If you make a mistake when entering a number, re-enter the number to correct it. You can also 
press the up or down arrow button to change the number one unit at a time.
 
9When done entering the IP Address, press [ ].
10Press the down arrow key to go to the  Subnet Mask fields, and then press [ ].
11Repeat the same entry process for  Subnet Mask, Gateway , and DNS Server .
12When done, select  OK at the bottom of the page, and then press [ ]. The network test screen 
appears and...

145
Network
7
7 Network
7.1.3 Connecting to a Wireless Network
To connect your product to your network wireless, you need a wireless router or modem and a Samsung 
Wireless LAN adapter (WIS10ABGN, WIS12ABGNX) , which you connect to your 
product back or side 
panel USB port. See the illustration below.
Samsung’s Wireless LAN adapter is sold separately and is offered by selected retailers, Ecommerce 
sites, and Samsungparts.com. Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n...

146
Network
7
7 Network
†WPS (PBC)
†One Foot Connection
zThe product may not recognize the Samsung Wireless LAN adapter if you connect it to the 
product with a USB hub or USB extension cable other than the cable supplied with the product.
 
7.1.4 Wireless Network Setting
Automatic Network Setup
Most wireless networks have an optional security system that requires devices that access the network 
to transmit an encrypted security code called an Access or  Security Key. The Security Key is based on 
a...

147
Network
7
7 Network
Manual Network Setup
Use the Manual Network Settings  when connecting your product to a network that requires a Static IP 
address or if the automatic connection process has failed.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1Right click the Network icon on the bottom right of the screen.
2In the pop-up menu that appears, click Status.
3On the dialog that appears, click the Support tab.
4On the Support...

148
Network
7
7 Network
13Repeat the entry process for each field in the IP Address.
 If you make a mistake when entering a number, re-enter the number to correct it. You can also 
press the   or   button to change the number one unit at a time.
 
14When done entering the IP Address, press [ ].
15Press the   button to go to the  Subnet Mask fields, and then press [ ].
16Repeat the same entry process for  Subnet Mask, Gateway , and DNS Server .
17When done, select  OK at the bottom of the page, and then...

149
Network
7
7 Network
7.1.6 One Foot Connection
The One Foot Connection  function lets you connect your Samsung product automatically to a Samsung 
wireless routers. If your wi reless router does not support  One Foot Connection, you must connect using 
one of the other methods.
 You can check for equipment that supports  One Foot Connection on www.samsung.com. 
How to set up using One Foot Connection
1Turn on the Samsung wireless router and the product.
2Go to Network Settings screen.
3Select  One...

150
Network
7
7 Network
7.1.7 Ad Hoc Network Setup
You can connect to a mobile device supporting Ad-hoc connections without a wireless router or AP 
through the product.
How to set up using Ad hoc
1Go to Network Settings screen.
2Select  Wireless (General), and press [ ], then press [ ] again.
3Select Ad hoc . The message “ Ad hoc service supports a direct connection with Wi-Fi 
compatible devices like a cell phone or PC. Other network services may be limited. Do you 
want to change the network...