Samsung Series 7 User Guide

171
System
8
8 System
8.13.3 BD Wise
Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theater products which 
support  BD Wise . When BD Wise  is turned  On, the picture mode is automatically changed to the 
optimal resolution.
 Available when you connect Samsung products that support BD Wise through an HDMI cable to the 
product.
 
8.13.4 Auto Power
Enabling this option will automa tically power on the product if the power cable is connected.
8.13.5 Standby Control
You can set the...

172
System
8
8 System
8.13.8 Power On Adjustment
You can set the warm-up time for the screen to turn on after the power button is pressed. (Range: 0 – 50 
seconds)
 A warm-up time that is too short may damage the product due to overvoltage. 
8.13.9 Temperature Control
This function detects the internal temperature of the product. You can specify the temperature range that 
is acceptable.
The default temperature is set to 77 C.
The recommended operating temperature for this product is 75 to 80 C (based on...

173
System
8
8 System
8.13.11 3D Video Sync (ME75B model only)
Synchronize the displays with your 3D glasses when viewing a 3D video using multiple displays.
Current Mode: Select the desired option from  Stand-Alone, Main , and  Secondary .
Main Device Number : If you set Current Mode  to Main , the current display will be set as the primary 
display. Select a number between  1 and  10 for  Main Device Number . The selected number will be 
assigned to the primary display.
Select Main Device : If Current...

174
System
8
8 System
8.14 Anynet+(HDMI-CEC)
 MENU  []    System  Anynet+(HDMI-CEC)   ENTER [ ]
8.14.1 Anynet+(HDMI-CEC)
What is Anynet+?
Anynet+ is a function that enables you to control all connected Samsung devices that support  Anynet+ 
with your Samsung product remote. The  Anynet+ system can be used only with Samsung devices that 
have the  Anynet+ feature. To be sure your Samsung device has this feature, check if there is an  Anynet+ 
logo on it.
 zYou can only control Anynet+ devices using the...

175
System
8
8 System
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the 
product.
8.14.2 Auto Turn Off (No / Yes)
Setting an Anynet+ Device to turn Off automatically when the product is turned off.
 zIf Auto Turn Off  is set to Yes, running external devices will turn off at the same time as the product 
powers off.
zMay not be enabled depending on the device. 
Switching between Anynet+ Devices
1Press the  TOOLS button, select Anynet+ (HDMI-CEC)...

176
System
8
8 System
zIf you have selected an Anynet+ device by pressing the SOURCE button and then selecting 
its input source, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ 
device by using the  Device List.
 
8.14.3 Receiver
You can listen to sound through a  Receiver (i.e. Home Theater) instead of the product Speaker.
To listen to sound through a receiver, go to  Receiver screen (System  Anynet+ (HDMI-CEC)   
Receiver ). Then select  Receiver and set to  On.
 If your...

177
System
8
8 System
8.15 DivX® Video On Demand
 MENU  []    System  DivX® Video On Demand   ENTER [ ]
Shows the registration code authorized for the product. If you connect to the DivX web site and register 
using that code, you can download the VOD registration file.
 For more information about DivX®  VOD, visit “http://vod.divx.com”. 
The message “Connecting to 
Anynet+ device...” appears on 
the screen.zYou cannot use the remote control when you are configuring 
Anynet+ or switching to a view mode....

178
System
8
8 System
8.16 Network Remote Control
 MENU  []    System  Network Remote Control   ENTER [ ]
Turn on/off or give permission to Samsung mobile phone devices to connect with and control the 
product.
You must have a Samsung Mobile phone/device which supports Wireless Remote Control. For more 
details, refer to each device’s manual.
8.17 Reset System
 MENU  []    System  Reset System   ENTER [ ]
This option returns the current settings under system to the default factory settings.
8.18 Reset...

1799 Support
9 
Support
9.1 Software Upgrade
 MENU  []    Support  Software Upgrade   ENTER [ ]
The  Software Upgrade  menu lets you upgrade your TV’s software to the latest version.
9.1.1 By USB
Insert a USB drive containing the firmware upgrade file, downloaded from “www.samsung.com/sec,” into 
the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are 
complete. The TV will be turned off and on automatically after completing the firmware upgrade. When 
software is...

18010 MagicInfo Lite
10 
MagicInfo Lite
10.1 File Formats Compatible with MagicInfo Lite Player
10.1.1 Video / Audio
[Read before using MagicInfo Lite Player ]
zSupported USB-device file  systems include FAT16 and FAT32 . (NTFS is not supported.)
zA file with a vertical and horizontal resolution larger than the maximum resolution cannot be 
played.
Check the vertical and horizontal resolution of the file.
zVideo that does not contain audio data is not supported. Check that the video file contains audio...