Samsung SCX 4728FD User Manual

Media and tray
512.  Menu overview and basic setup
6 
Setting the paper size and type
After loading paper in the paper tray, set the paper  size and type using the 
control panel buttons. 
 
It may be necessary to press  OK to navigate to lower-level menus for some 
models.
 
1Select ( Menu) > System Setup  > Paper Setup  > Paper Size  or 
Paper Type  on the control panel.
2 Select the tray and the option you want.
3 Press OK to save the selection.
 
• The settings set from the machine  driver override...

Media and tray
522.  Menu overview and basic setup
8 
Loading originals
You can use the scanner glass or the document feeder to load an original for 
copying, scanning, and sendin g a fax(SCX-472x Series only).
On the scanner glass
Using the scanner glass, you can copy  or scan originals. You can get the best 
scan quality, especially for colored or gray-scaled images.  Make sure that no 
originals are in the document feeder. If an  original is detected in the document 
feeder, the machine gives it...

Media and tray
532.  Menu overview and basic setup
2 Place the original face down on the scanner glass. Align it with the 
registration guide at the to p left corner of the glass.
3 Close the scanner lid.
 
• Leaving the scanner lid open while copying may affect copy quality and 
toner consumption.
• Dust on the scanner glass may cause black spots on the printout. Always  keep it clean (see "Cleaning  the machine" on page 79).
• If you are copying a page from a book  or magazine, lift the scanner...

Media and tray
542.  Menu overview and basic setup
2 Load the original face up into the document feeder input tray. Make sure 
that the bottom of the  original stack matches th e paper size marked on 
the document input tray.3 Adjust the document fe eder width guides to the paper size.
 
• Dust on the document feeder glass may cause black lines on the 
printout. Always keep the glass cl ean (see "Cleaning the machine" on 
page 79).
• To print on both sides of the paper using the ADF, from the...

552.  Menu overview and basic setup
Basic printing 
 
For special printing features, refer to the Advanced Guide (see "Using 
advanced print features" on page 216).
 
9 
Printing
 
If you are a Macintosh or Linux user, refer to the "Macintosh printing" on 
page 224 or "Linux printing" on page 225.
 
The following Printing Preferences window is for Notepad in Windows 7.
1Open the document you want to print.
2 Select Print from the File  menu.
3 Select your machine from the Select...

Basic printing
562.  Menu overview and basic setup
10 
Canceling a print job
If the print job is waiting in the print queue or print spooler, cancel the job as 
follows:
• You can access this window by s imply double-clicking the machine icon 
( ) in the Windows task bar. 
• You can also cancel the  current job by pressing  ( Stop/Clear) on the 
control panel.
Downloaded From ManualsPrinter.com Manuals 

Basic printing
572.  Menu overview and basic setup
11 
Opening printing preferences
 
• The Printing Preferences  window that appears in this user’s guide may 
differ depending on the machine in use. 
• When you select an option in  Printing Preferences, you may see a 
warning mark   or   . An   mark means you can select that certain 
option but it is not recommended, and an   mark means you cannot 
select that option due to the  machine’s setting or environment.
 
1Open the document you want to print.
2...

Basic printing
582.  Menu overview and basic setup
1Change the settings as needed on each tab. 
2 Enter a name for the item in the Presets input box.
3 Click  ( Add). When you save  Presets, all current driver settings are 
saved.
 
Select more options and click   ( Update), settings will be added to the 
Presets you made. To  use a saved setting, select it from the  Presets drop-
down list. The machine is now set to print according to the settings you 
have selected.
To delete saved settings, select it...

Basic printing
592.  Menu overview and basic setup
Setting Eco mode on the control panel
 
• The settings set from the machine’s driver override the settings on the 
control panel.
• Accessing menus may differ from model to model (see "Accessing the  menu" on page 31).
• It may be necessary to press  OK to navigate to lower-level menus for 
some models.
 
1Select ( Menu) > System Setup  > Machine Setup > Eco Settings  on 
the control panel.
2 Select the option yo u want and press OK.
• Default...

Basic printing
602.  Menu overview and basic setup
Result simulator
Result Simulator shows the results of reduced emi ssion of carbon dioxide, used 
electricity, and the amount  of saved paper in accordance with the settings you 
selected.
• The results are calculated on the basis that the total number of printed  paper is one hundred without a blank page when the Eco mode is disabled.
• Refers to the calculation coefficien t about CO2, energy, and paper from IEA, 
the index of Ministry of Internal Affai...