Samsung SCX 4728FD User Manual

713.  Maintenance
Ordering supplies and accessories
 
Available accessories may differ from country to country. Contact your sales representatives to obtain the list of available supplies, and maintenance parts.
 
To order Samsung-authorized supplies, accesso ries, and maintenance parts, contact your local Samsung de aler or the retailer where you purchased your machine. 
You can also visit  www.samsung.com/supplies , and then select your country/region to obtain the cont act information for service....

723.  Maintenance
Available supplies
When supplies reach the end of their life spans, you can order the following s of 
supplies for your machine:
 
Depending on the options, percentage of image area and job mode used, 
the toner cartridge’s lifespan may differ.
 
 
When purchasing new toner cartridges or other supplies, these must be 
purchased in the same country as the machine you are using. Otherwise, 
new toner cartridges or other supplies will be incompatible with your 
machine due to different...

733.  Maintenance
Available maintenance parts
To purchase maintenance parts, contact the source where you bought the machine. Replacing ma intenance parts can be performed only by an authorized service 
provider, dealer, or the r etailer where you bought  the machine. The warranty  does not cover the replacement of any maintenance  parts once it has reached its 
“Average yield”.
Maintenance parts are replaced at specific  intervals to avoid print quality and paper feed problems resulting from worn parts,...

743.  Maintenance
Redistributing toner
When the toner cartridge is near the end of its life:
• White streaks or light printing occurs  and/or density variation side to side. 
• The  Status LED blinks red. 
If this happens, you can temporari ly improve print quality by redistributing the remaining tone r in the cartridge. In some cases, white streaks or light printing will still 
occur even after you have  redistributed the toner.
 
If toner gets on your clothing, wipe it off with a dry cloth and  wash...

753.  Maintenance
Replacing the toner cartridge
 Click this link to open an animation about solving power problems.
 
• Do not use sharp objects such as a knife or scissors to open th e toner cartridge package. They might scratch the drum of the cartridge.
• If toner gets on your clothing, wipe it o ff with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric .
• Shake the toner cartridge thorougly, it  will increase the initial print quality.
• Do not touch the green underside...

Replacing the toner cartridge
763.  Maintenance
When a toner cartridge has reached the end of life, the machine will stop printing.
Downloaded From ManualsPrinter.com Manuals 

773.  Maintenance
Monitoring the supplies life
If you experience frequent paper jams or printing problems, check the number of pages the  machine has printed or scanned. Replace the corresponding parts, if 
necessary.
 
It may be necessary to press  OK to navigate to lower-level menus for some models.
 
1Select ( Menu) > System Setup  > Maintenance  > Supplies Life on the control panel.
2 Select the option yo u want and press OK.
• Supplies Info : Prints the supply  information page.
• Total : Displays...

783.  Maintenance
Setting the toner low alert
If the amount of toner in the cartridge is low, a message or LED informing the user  to change the toner cartridge appears. You  can set the option for whether or not 
this message or LED appears.
1Select ( Menu) > System Setup  > Maintenance  > Toner Low Alert  on the control panel.
2 Select the option you want.
3 Press OK to save the selection.
Downloaded From ManualsPrinter.com Manuals 

793.  Maintenance
Cleaning the machine
If printing quality problems occur or if you use your machine in a dusty environment, you need to clean your machine regularly  to keep it in the best printing 
condition and use yo ur machine longer.
 
• Cleaning the cabinet of the machine with cleaning materials cont aining large amounts of alcohol, solvents, or other strong substances can discolor or distort the 
cabinet. 
• If your machine or the surrounding area is contaminated with toner, we recommend you use...

Cleaning the machine
803.  Maintenance
2 
Cleaning the inside
 
• Use a dry lint-free cloth to clean the machine.
• If your machine has a power switch, turn the power switch off before cleaning the machine.
• Before opening the front cover,  close the output support first.
 
Downloaded From ManualsPrinter.com Manuals