Samsung SCX 4728FD User Manual

612.  Menu overview and basic setup
Basic copying
 
For special printing features, refer to the Advanced Guide (see "Copy menu" 
on page 179).
 
14 
Basic copy
1Select  (copy) on the control panel.
2 Place a single document face down on  the document glass, or load the 
documents face up into th e document feeder (see "Loading originals" on 
page 52).
3 If you want to customize th e copy settings including Reduce/Enlarge, 
Darkness , Contrast , Original,  and more by using the control...

Basic copying
622.  Menu overview and basic setup
1Select (copy) > (Menu) > Copy Feature  > Darkness  on the 
control panel.
Or select Darkness button  on the control panel.
2 Select the option you want and press OK.
For example, the  Light+5 being the lightest, and the  Dark+5 being the 
darkest.
3 Press ( Stop/Clear ) to return to ready mode.
Contrast
The Contrast menu lets you  increase or decrease the difference between the 
bright and dark areas of an image.
1Select (copy) > ( Menu) > Copy Feature...

Basic copying
632.  Menu overview and basic setup
To select from the predefined copy sizes
1Select (copy) > (Menu) > Copy Feature  > Reduce/Enlarge  on 
the control panel.
2 Select the option yo u want and press OK.
3 Press ( Stop/Clear ) to return to ready mode.
To scale the copy by direc tly entering the scale rate
1Select (copy) > (Menu) > Copy Feature  > Reduce/Enlarge  > 
Custom  on the control panel.
2 Enter the copy size you want  using the numeric keypad.
3 Press OK to save the selection.
4 Press...

Basic copying
642.  Menu overview and basic setup
4 Press Start.
Your machine begins scanning  the front side and shows Place Back Side 
and Press [Start] .
5 Turn the original over and place it  on the scanner glass where arrows 
indicate as shown. Then , close the scanner lid.
6 Press Start.
 
• If you do not press the  (Start ) button, only the front side will be 
copied.
• If the original is larger than the pr intable area, some portions may not be 
printed.
 
Downloaded From ManualsPrinter.com Manuals 

652.  Menu overview and basic setup
Basic scanning
 
For special scanning features, refer to the Advanced Guide (see "Scan 
features" on page 230).
 
17 
Basic Scanning
This is the normal and usual procedure for scanning originals.
This is a basic scanning m ethod for USB-connected machine.
 
• It may be necessary to press  OK to navigate to lower-level menus for 
some models.
• if you want to scan using the networ k, refer to the Advanced Guide (see 
"Scanning from network connected...

662.  Menu overview and basic setup
Basic faxing
 
• This function is not supported for SCX-470X Series (see"Control panel 
overview" on page 24).
• For special faxing features, refer to the  Advanced Guide (See "Fax 
features" on page 241).
 
 
• You cannot use this machine as a fa x via the internet phone. For more 
information ask your internet service provider.
• We recommend using traditional analog phone services (PSTN: Public  Switched Telephone Network) when connecting telephone...

Basic faxing
672.  Menu overview and basic setup
3 Adjust the resolution and the darkness to suit your fax needs (see 
"Adjusting the document settings" on page 68).
4 Enter the destination fax number.
5 Press  (Start) on the control panel. The  machine starts to scan and 
send the fax to the destinations.
 
• If you want to send a fax directly from your computer, use  Samsung 
Network PC Fax (see  "Sending a fax in the computer" on page 242).
• When you want to cancel a fax job, press...

Basic faxing
682.  Menu overview and basic setup
3 Adjust the resolution and the darkness to suit your fax needs (see 
"Adjusting the document settings" on page 68).
4 Select ( Menu) > Fax Feature  > Multi Send  on the control panel.
5 Enter the number of the first  receiving fax machine and press  OK.
You can press speed dial  numbers or select a group dial number using 
the ( Address book ) button (see Advanced Guide).
6 Enter the second fax  number and press OK.
The display asks you to enter...

Basic faxing
692.  Menu overview and basic setup
Resolution
The default document settings produce good results when using typical text-
based originals. However, if  you send originals that are of poor quality, or 
contain photographs, you can adjust the resolution to produce  a higher quality 
fax. 
1Select (fax) > (Menu ) > Fax Feature  > Resolution  on the control 
panel.
2 Select the option yo u want and press OK.
• Standard : Originals with norm al sized characters.
• Fine : Originals containing...

3. Maintenance
This chapter provides information about purchasing supplies, accessories and maintenance parts available for your 
machine.
• Ordering supplies and accessories71
• Available supplies 72
• Available maintenance parts 73
• Redistributing toner 74
• Replacing the toner cartridge 75
• Monitoring the supplies life 77
• Setting the toner low alert 78
• Cleaning the machine 79
Downloaded From ManualsPrinter.com Manuals