Samsung SCX 4500W User Manual

4.1   
4 Loading originals and print 
media
This chapter introduces you how to load originals and print media into 
your machine.
This chapter includes:
• Loading originals
• Selecting print media
• Loading paper in the tray
• Setting the paper size and type
Loading originals
You can use the scanner glass to load an original for copying and 
scanning.
1Lift and open the scanner lid.
2Place the original face down on the scanner glass and align it with 
the registration guide at the bottom left corner of...

4.2   
Selecting print media
You can print on a variety of print media, such as plain paper, labels, and 
transparencies. Always use print media that meet the guidelines for use 
with your machine. Print media that does not meet the guidelines outlined 
in this user’s guide may cause the following problems:
• Poor print quality
• Increased paper jams
• Premature wear on the machine.
Properties, such as weight, composition, grain, and moisture content, are 
important factors that affect the machine’s...

4.3   
Specifications on print media
Note 
• Due to the nature of the product, the envelope type of media cannot be used with your machine. 
•Use the print media type mentioned below only.     
    
Note 
•When you use the thick paper (90 to 120 g/m2, 24 to 32 lb bond), select Thick Paper in the paper type. See 4.6 page.
• When you use the thin paper (under 70 g/m
2, under 19 lb bond), select Thin Paper in the paper type. See 4.6 page.
• When you use the recycled paper, select Recycled Paper in the paper...

4.4   
Guidelines for special print media
Media typeGuidelines
Transparencies • To avoid damaging the machine, use only 
transparencies designed for use in laser 
machines.
• Transparencies used in the machine must be 
able to withstand the machine’s fusing 
temperature. Check your machine’s specification 
to view the fusing temperature, see page 11.1.
• Place them on a flat surface after removing them 
from the machine.
• Do not leave them in the paper tray for long 
periods of time. Dust and dirt may...

4.5   
Loading paper in the tray
Load the print media you use for the majority of your print jobs in the tray. 
The tray can hold a maximum of 100 sheets of 75 g/m2 (20 lb bond) plain 
paper. 
1Press the tray open button, then the tray pops out. Pull the tray 
completely out.     
Note
When the tray does not close properly, pull the tray half way out 
and try again.
2Place paper with the side you want to print facing down.
3Align the tray with the slot, and slide it into the machine.
    
4After loading...

4.6   
2After inserting paper into the tray, while pinching the paper width 
guide as shown, move it toward the stack of paper until it lightly 
touches the side of the stack. Do not press the guide too tightly to 
the edge of the paper; the guide may bend the paper. 
Note
• Do not push the paper width guides far enough to cause the 
materials to warp.
• If you do not adjust the paper width guides, it may cause paper 
jams.  
Setting the paper size and type
The settings you change remain in effect only...

5.1   
5 Copying
This chapter gives you information about using your machine as a copy 
machine.
This chapter includes:
• Copying originals
• Changing the settings for each copy
Copying originals
This is the normal and usual procedure for copying your originals.
1Load originals place a single original face down on the scanner 
glass.    
2Customize the copy settings including copy size, darkness, and 
paper size, by using the control panel buttons.
3Press Copies and select the number of copies using...

6.1   
6 Scanning
Scanning with your machine lets you turn hard copy originals into digital 
files.
Refer to the Scanning part of Software section. 
This chapter includes:
• Scanning basics
• Scanning to an application using a local connection
• Setting scan information in Samsung Scan Manager
Scanning basics
Your machine offers the following ways to scan an image using a local 
connection:
• Via one of the preset imaging applications. Scanning an image 
launches the selected application, enabling you to...

6.2   
Setting scan information in Samsung Scan 
Manager
You can find out about Samsung Scan Manager program information 
and installed scan drivers condition. Also, you can change scan settings 
and add or delete the folders where scanned documents to computer are 
save in Samsung Scan Manager program. 
Note
Scan Manager program can only be used in the Window and 
Macintosh system. If you use the Macintosh, See Software 
section. 
1Press Start > Control Panel > Samsung Scan Manager.
Samsung Scan Manager...

7.1   
7 Basic printing
This chapter explains common printing tasks. Your machine allows you to 
print from various Windows, Macintosh, or Linux applications. 
Note
The following procedure is for Windows operating system. 
For Linux and Macintosh, see Software section.
Printing a document
The exact steps for printing a document may vary depending on the 
application you use.
1Open the document you want to print.
2Select Print from the File menu. The Print window is displayed. It 
may look slightly...