Samsung SCX 4500W User Manual

2.3   
Linux
Macintosh
Operating System
Requirements (recommended)
CPURAMfree HDD 
space
RedHat 8.0, 9.0 
(32bit)
• Pentium IV 
2.4GHz 
(IntelCore2)• 512 MB 
(1024 MB)1 GB 
(2GB) RedHat Enterprise 
Linux WS 4, 5 
(32/64bit)
Fedora Core 1~7 
(32/64bit)
Mandrake 9.2 (32bit), 
10.0, 10.1 (32/64bit)
Mandriva 2005, 2006, 
2007 (32/64bit)
SuSE Linux 8.2, 9.0, 
9.1 (32bit)
SuSE Linux 9.2, 9.3, 
10.0, 10.1, 10.2 
(32/64bit)
SuSE Linux Enterprise 
Desktop 9, 10  
(32/64bit)
Ubuntu 6.06, 6.10, 
7.04 (32/64bit)...

3.1   
3 Getting Started
This chapter gives you step-by-step instructions for setting up the 
machine.
This chapter includes:
• Setting up the hardware
• Setting up the network
• Using a wired network
• Using a wireless network
• Altitude adjustment
Setting up the hardware
This section shows the steps to set up the hardware which is explained 
in the Quick Install Guide. Make sure you read Quick Install Guide and 
complete following steps.
1Select a stable location. 
Select a level, stable place with...

3.2   
Setting up the network
You need to set up the network protocols on the machine (;printer) to use 
it in the network environment. If you use your machine in the wired 
network, refer to Using a wired network. If you use your network printer 
in the wireless network, refer to See Using a wireless network on 
page 3.4.
Supported network environments
The following table shows the network environments supported by the 
machine: 
Using a wired network
You must set up the network protocols on your...

3.3   
2Temporarily disable the computer firewall before continuing by doing 
the following:
3From the Windows Start menu, select All Programs > Samsung 
Network Printer Utilities > SetIP > SetIP.
4Click on the 
 icon(third from left) in the SetIP window to open 
the TCP/IP configuration window.
5Enter the machine’s new information into the configuration window 
as follows:
•MAC Address: Find the machine’s MAC address from the Network 
Configuration Report and enter it without the colons.
For example,...

3.4   
4The list of machines available on the network appears. Select the 
printer you want to install from the list and then click Next. 
Note
•If you do not see your machine on the list, click Update to 
refresh the list, or select Add TCP/IP Port to add your 
machine to the network. To add the machine to the 
network, enter the port name and the IP address for the 
machine.
•To verify your machine’s IP address or the MAC address, 
print a Network Configuration Report page.
5After the installation is...

3.5   
Printing Configuration report
Press and hold Stop/Clear button for about 4 seconds to print a 
machine report.
Please review your machines User’s Guide to learn of additional details. 
Using this Network Configuration Report, you can find your machine 
MAC address and IP address.
For example:
MAC Address     : 00:15:99:41:A2:78
IP Address         : 192.0.0.192
Setting IP address
Firstly, you have to set up an IP address for network printing and 
managements. In most cases a new IP address will be...

3.6   
•IP Address: Enter a new IP address for your printer the same as the 
computer’s IP address except for the last number.
For example, if your computer’s IP address is 192.168.1.150, enter 
192.168.1.X. (X is number between 1 and 254 other than the 
computer’s address.)
•Subnet Mask: Enter this exactly the same as the computer’s Subnet 
Mask.
•Default Gateway: Enter this exactly the same as the computer’s 
Default Gateway.
6Click Apply, and then click OK. The machine will automatically print 
the...

3.7   
Configuring the machine’s wireless network
Before starting you will need to know the SSID of your wireless network 
and the Network Key if it is encrypted. This information was set when the 
access point was installed. If you do not know about your wireless 
environment, please ask the person who has set up your network.
Using SyncThru™ Web Service
Before starting wireless parameter configuration, make sure cable 
connection status. 
1Start a web browser such as Internet Explorer, Safari or...

3.8   
5Click Next.
If wireless security setting window appears, enter the registered 
password (network key) and click  
Next.
6
Wizard Setup Confirmation window appears, please check your 
wireless setup. If the setup is right, click 
Apply.
7Click 
OK.
Now go to Installing the software.
Installing the software
You must install the printer driver software for printing. The software 
includes drivers, applications, and other user friendly programs. 
Make sure that the network setup for your machine is...

3.9   
Altitude adjustment
The print quality is affected by atmospheric pressure, which is determined 
by the height of the machine above sea level. The following information 
will guide you on how to set your machine to the best print quality or best 
quality of print. 
The altitude above 1,000 m (3,281 ft), may affect the print quality such as 
loose toner or light imaging.
Before you set the altitude setting, find the altitude where you are using 
the machine.
To set the machine for high altitude,...