Samsung SCX 4321 User Manual

Paper Handling
3.3
Loading Paper
Proper paper loading helps prevent paper jams and ensure 
trouble-free printing. Do not remove the paper in the tray while 
a job is printing. Doing so may cause a paper jam. See 
?$paratext>? on page 3.1 for acceptable paper size and 
capacity for the tray. 
Using the Tray
The tray holds 150 sheets of paper.
Load a stack of paper into the tray and print. For details about 
loading paper in the tray, see ?$paratext>? on page 2.3. 
To use the special material like...

Copying
4.1
4Copying
This chapter gives you step-by-step instructions for copying 
documents.
This chapter includes:
• Loading Paper for Copying
• Preparing a Document
• Making Copies on the Document Glass
• Making Copies from the Automatic Document Feeder
• Setting Copy Options
• Using Special Copy Features
• Changing the Default Settings
• Setting the Time Out Option
• Setting the Favorite Copy Option
Loading Paper for Copying
The instructions for loading print materials are the same 
whether you are...

Copying
4.2
Making Copies on the Document Glass
1Lift and open the document cover.
2Place the document face down on the document glass 
and align it at the top left corner of the glass.
NOTE: Make sure that no documents are in the ADF 
(Automatic Document Feeder). If a document is detected in 
the ADF, the machine gives it priority over the document on 
the document glass.
3Close the document cover.
NOTES: 
• When you close the document cover, please be careful of any 
injuries.
• Leaving the cover open...

Copying
4.3
2Adjust the document guides to the document size.
Downloaded From ManualsPrinter.com Manuals 

Copying
4.4
3Customize the copy settings including number of copies, 
copy size, darkness, and original type, by using the control 
panel buttons. See ?$paratext>? on page 4.4.
To clear the settings, use the 
Stop/Clear button.
4If necessary, you can use special copy features, such as 
Collate and 2 or 4 Up copying. 
5Press Start to begin copying. 
The display shows the copy processing.
NOTE: Dust on the ADF glass may cause black lines on the 
printout. Always keep it clean.
Setting Copy Options
The...

Copying
4.5
Using Special Copy Features
You can use the following copy features:
•Off: Prints in normal mode.
•
Clone: Prints multiple image copies from the original 
document on a single page. The number of images is 
automatically determined by the original image and paper 
size. See ?$paratext>? on page 4.5.
•Copy Collate: Sorts the copy job. For example, if you make 
2 copies of a 3 page document, one complete 3 page 
document will print followed by the second complete 
document. See ?$paratext>? on...

Copying
4.6
5If necessary, customize the copy settings, including 
number of copies, darkness, and original type, by using 
the control panel buttons. See ?$paratext>? on page 4.4.
NOTE: You cannot adjust the copy size using the Reduce/
Enlarge button while Auto Fit copying is enabled.
6Press Start to begin copying.
ID Card Copying
You can copy both sides of the ID Card like a drivers licence to 
a single side of paper. 
When you copy using this feature, the machine prints one side 
of the card on the...

Copying
4.7
Changing the Default Settings
The copy options, including darkness, original type, copy size 
and number of copies, can be set to the most frequently used 
modes. When you copy a document, the default settings are 
used unless they are changed by using the corresponding 
buttons on the control panel.
To create your own default settings:
1Press Menu on the control panel until “Copy Setup” 
appears on the top line of the display. 
The first menu item, “Default-Change”, appears on the 
bottom...

Basic Printing
5.1
5Basic Printing
This chapter includes:
• Printing a Document
• Canceling a Print Job
Printing a Document
This machine allows you to print in various Windows 
applications, a Macintosh computer, or a Linux system. The 
exact steps for printing a document may vary depending on the 
application you use. 
For details about printing, see 
Software User’s Guide. 
Canceling a Print Job
If the print job is waiting in a print queue or print spooler, such 
as the Printer group in Windows, delete...

Scanning
6.1
6 Scanning
This chapter includes:
• Scanning Basics
• Scanning From the Control Panel to an Application
Scanning Basics
Your SCX-4x21 Series offers four ways to scan. These are:
• From the control panel on your machine to an 
application: Use the 
Scan-to button on the control panel 
to initiate scanning. Assign the TWAIN-compliant 
software, such as Adobe Photo Deluxe or Adobe 
Photoshop, to the machine by selecting it from a list of 
available applications via the 
Scan-to button. To...