Samsung Plasma TV UN51ES6500 User Manual
Have a look at the manual Samsung Plasma TV UN51ES6500 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Shows the title menu of the disc in the connected device. E.g. If a DVD player is connected, the title menu of the movie in the DVD player will appear. NDepending on the device, this menu may not be available. ●Receiver Sound is played through the receiver. Setting up Anynet+ (HDMI-CEC) ●Anynet+ (HDMI-CEC)
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On. NWhen the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated ●Auto Turn Off Set an Anynet+ Device to turn off automatically when the TV is turned o f f. NIf Auto Turn Off is set to Ye s , running external devices will turn off
at the same time as the TV powers o f f. NMay not be enabled depending on the device. ●Receiver You can listen to sound through a receiver (i.e. Home Theater) instead of the TV Speaker. Switching between Anynet+ Devices 1. Open the Tools menu using your remote, and then select Anynet+
(HDMI-CEC). 2. Select Device List. The Device List screen appears. NIf you cannot find a device you want, select Refresh to refresh the list. 3. Select a device, and then wait until the switch to the selected device is completed. NThe Device List menu appears only when you set Anynet+
(HDMI-CEC) to On in the System menu. NSwitching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while switching is in progress. NIf you have selected an Anynet+ device using the Source function, you cannot use the Anynet+ function. Make sure to switch
to an Anynet+ device using the Device List function. Listening through a Receiver You can listen to sound through a receiver (i.e. Home Theater) instead of the TV speakers. To listen to sound through a receiver, go to the Receiver screen ( System → Anynet+ (HDMI- CEC) → Receiver ). Then select Receiver and set to On. NIf your receiver supports audio only,
it may not appear in the device list. NThe receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) port of the TV. NWhen the receiver (i.e. Home Theater) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When
the source is a digital component such as a DVD player and it is connected to the TV via HDMI, you will hear only 2 channel sound from the receiver. Using the ARC function for LED 6100 ― 7150 Series and PDP TV You can listen to sound from the TV through a receiver connected using an HDMI cable without connecting a separate optical cable. To listen to
sound through a receiver using the ARC function, go to the Receiver screen (System → Anynet+ (HDMI-CEC) → Receiver ). Then select Receiver and set to On. NTo use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the HDMI IN 2 (ARC) port. NTo disable the ARC function, set the Receiver to Off. Even if
the TV transmits the ARC signal continuously, the receiver will be blocked from receiving the signal.