Samsung Plasma TV UN51ES6500 User Manual
Have a look at the manual Samsung Plasma TV UN51ES6500 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
differ depending on the program being broadcast or the broadcast signal. SPDIF Output Menu → Sound → SPDIF Output SPDIF (Sony Philips Digital Interface) provides digital audio output to speakers and various digital devices such as A/V Receivers and Home Theaters which reduces interference and distortion. ●Audio Format
You can select the Digital Audio output (SPDIF) format. The available Digital Audio output (SPDIF) format may differ depending on the input source. ●Audio Delay Lets you correct timing mismatches between the audio track and the video when you are watching the TV and listening to digital audio output from the TV through an external device such as an AV receiver. When you select the
Audio Delay function, a slider screen appears. Adjust the option value using your remote (0ms ~ 250ms). Speaker Settings Menu → Sound → Speaker Settings ●Speaker Select If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo caused by the difference in decoding speed between the TV’s
speakers and the speakers attached to your audio receiver. If this occurs, set the TV to External Speaker . NWhen Speaker Select is set to External Speaker , the TV’s speakers are turned off. You will hear sound through the external speakers only. When the Speaker Select is set to TV Speaker , both the TV’s speakers and the external speakers are on. You will hear sound through both.
NWhen the Speaker Select is set to External Speaker , the volume buttons and mute functions will not operate and the sound settings will be limited. NIf there is no video signal, both the TV’s speakers and the external speakers will be mute. ●Auto Volume Because each station has its own broadcasting conditions, the volume
may fluctuate each time you change the channel. This feature automatically adjusts the volume of a channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. NTo use the volume control of a connected source device, set Auto Volume to Off . If Auto Volume is set to Normal or Night , adjusting
the volume control of a connected source device may have no effect. Reset Sound Menu → Sound → Reset Sound Reset all sound settings to the factory defaults.
Connecting to the NetworkThe Wired Network Connection There are three ways to attach your TV to your LAN using cable: NFor illustrations of the three kinds of wired network connections, see your paper user's manual. – You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a LAN cable. Preference Feature
– You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a router which is connected to an external modem. Use LAN cable for the connection. – You may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a LAN cable. Note that the wall outlet is attached to a modem or router
elsewhere in your house. NIf your network requires a Dynamic IP address, you should use an ADSL modem or router that supports the Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you do not have to enter them manually.