Samsung Plasma TV UN51ES6500 User Manual
Have a look at the manual Samsung Plasma TV UN51ES6500 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
you must connect using one of the other methods. NYou can check for equipment that supports Plug & Access on www. samsung. com. To set up your TV's wireless network connection using Plug & Access, follow these steps: 1. Turn on the Samsung wireless router and your TV. 2. Insert a USB memory stick into the
USB port in your Samsung wireless router. Check the router’s LED’s to make sure it is on (Blinking → on). 3. Take the USB memory stick out of the router, and then insert it into a USB port on your Samsung TV. The memory stick downloads the connection information. 4. Wait until the connection is automatically established. NIf Plug & Access does not connect
your TV to your wireless router, a popup screen appears on the screen notifying you of the failure. If you want to try using Plug & Access again, disconnect the USB memory stick, reset the router, and then try again from Step 1. You can also choose one of the other connection setup methods. 5. The network connection screen appears, and the network setup is
done. NIf the wireless router’s settings change or you install a new wireless router, you must perform the Plug & Access procedure again, beginning from Step 1. Network Status Menu → Network → Network Status You can check the current network and Internet status.
If the wireless network connection failed... ●Wireless network connection failed. No wireless router selected. Go to Network Settings to select your router. ●Unable to connect to wireless router. Try the following: check if the router is turned on, and if it is, try turning it off and on again. Check if you need to enter a security key to use the router. ●IP auto setting failed. Try the following to set your IP address
automatically or set your IP address manually by selecting IP Settings. 1.) Ensure that DHCP server is enabled on the router. 2.) Unplug and re-plug- in the router. 3.) Contact your Internet Service Provider for more information. ●Unable to connect to the network. Try the following: check if your IP address is set correctly in IP Settings. Contact your Internet Service Provider for more information.
●Connected to your local network, but cannot connect to the Internet. Check the DNS settings in IP Settings, or contact your Internet Service Provider to access the Internet. ●Network setup complete, but cannot connect to the Internet. Contact your Internet Service Provider to access the Internet.
Managing the Network Connected Devices Wi-Fi Direct Menu → Network → Wi-Fi Direct Set to connect the TV to wireless mobile devices. Using this function, you can connect wireless mobile devices to your TV directly without a router. NTo use this function, your mobile device should be supported by the Wi-Fi Direct. To connect your mobile device with
your TV using Wi-Fi Direct, follow these steps:1. Turn on the Wi-Fi Direct device and activate its Wi-Fi Direct function. 2. Go to the Wi-Fi Direct screen (Network → Wi-Fi Direct). The TV starts to search for devices, and then displays the devices on the Wi-Fi Direct screen. 3. Select the desired Wi-Fi device. 4. On the Wi-Fi device:
– For PBC: Press the WPS(PBC) button on your Wi-Fi device within 2 minutes. The Connecting popup appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected. – For PIN: Input the displayed PIN on your device. The Connecting popup appears, followed by