Samsung Plasma Display HP-P3761 User Manual

31
Changing Channels
Using the Channel Buttons
Press the CH or CH button to change channels.
When you press the CH or CH button, the PDP changes channels 
in sequence. You will see all the channels that the PDP has memorized.
(The PDP must have memorized at least three channels.) 
You will not see channels that were either erased or not memorized.
Directly Accessing Channels
Press the number buttons to go directly to a channel. For example, to select
channel 27, press “2” then “7”. The TV will change...

32
Setting Up Your Remote Control
This PDPs remote control can operate almost any VCR, Cable box or DVD. After it has been set up
properly, your remote control can operate in five different modes: TV , VCR, CATV, DVD, or STB. 
Pressing the corresponding button on the remote control allows you to switch between these modes,
and control whichever piece of equipment you choose.
Notes :
●The remote control may not be compatible with all DVD Players, VCRs, Cable boxes.   
●The remote control can only operate...

33
Remote Control Codes
VCR Codes
Cable Box Codes
DVD Codes 

34
Setting the Signal Source
1
Press the MENU button. Press the ENTER button to
select “Input”.
2
Press the ENTER button to select “Source List”.
3 
Press the ▲or ▼button to select signal source, then
press the ENTER button.
4 
Press the MENU button to exit.
Note
•When you connect equipment to the PDP, you can choose between the following sets of jacks: 
AV1, AV2, S-Video, Component1, Component2, or DVI on the PDP’s rear panel.
Viewing an External Signal Source
Use the remote control to switch between...

Assigning Names to External input mode
1
Press the MENU button. Press the ENTER button to
select “Input”.
2 
Press the ▲or ▼button to select “Edit Name”, then
press the ENTER button.
3 
Press the ENTER button.
Press the ▲or ▼button to select external device, 
then press the ENTER button. 
• You can select the VCR, DVD, Cable STB, HD STB,
Satellite STB, AV Receiver, DVD Receiver, Game, 
Camcorder, DVD Combo, or DHR.  
• Set other signal sources (AV2, S-Video,
Component1, Component2, or DVI) using the...

PLASMA DISPLAY PANEL
Picture Control
Customizing the Picture ................................................................38
Using Automatic Picture Settings ....................................................39
Selecting the Color Tone ................................................................40
DNIe (Digital Natural Image engine)  ............................................41
Changing the Screen Size ............................................................42
Freezing the Picture...

Customizing the Picture
You can use the on-screen menus to change the Contrast, Brightness, Sharpness, Color, 
and Tint settings of your PDP.
38
1 
Press the MENU button. Press the ▲or ▼button to
select “Picture”, then press the ENTER button.
2
Press the ▲or ▼button to select “Custom”, then
press the ENTER button.
You will also see the items “Contrast”, “Brightness”,
“Sharpness”, “Color”, and “Tint”.
3
Press the ▲or ▼ button to select the item you wish
to change, then press the ENTER button. 
Press the...

39
1 
Press the MENU button. Press the ▲or ▼button to
select “Picture”, then press the ENTER button.
2 
Press the ENTER button to select “Mode”.
3 
Press the ▲or ▼button to select “Dynamic”, 
“Standard”, “Movie”, or “Custom” picture setting, 
then press the ENTER button.
4 
Press the MENU button to exit. 
•Choose Dynamic for viewing the TV during the day or 
when there is bright light in the room.
•Choose Standard for the standard factory settings.
•Choose Movie when viewing the movie.
•Choose Custom if...

40
Selecting the Color Tone
1 
Press the MENU button. Press the ▲or ▼button to
select “Picture”, then press the ENTER button.
2 
Press the ▲or ▼button to select “Color Tone”, then
press the ENTER button.
3 
Press the ▲or ▼button to select “Cool2”, “Cool1”,
“Normal”, “Warm1”, or “Warm2”,  then press the 
ENTER button.
•You can select “Cool”, “Normal” or “Warm” 
in DVI mode.
4
Press the MENU button to exit.
Mode : Dynamic√Custom√Color Tone : Normal√Film Mode : Off√Size : 16:9√PIP√DNIe : On√My Color...