Samsung Plasma Display HP-P3761 User Manual

PLASMA DISPLAY PANEL
Operation
Turning the PDP On and Off ..........................................................22
Plug & Play Feature ......................................................................24
Memorizing the Channels..............................................................27
Setting Up Your Remote Control ....................................................32
Viewing an External Signal Source ................................................34 

Turning the PDP On and Off
22
Turning the PDP On and Off
Press the POWER button on the remote control.
The PDP will be turned on and you will be ready to use its
features.
You can also use the POWER ( ) button on the front of the
PDP.
Note
•If your PDP isn’t turned on when the power button is
pressed: Press the 
MODEbutton to check if the TV mode
has been chosen ( ). 
Viewing the Menus and Displays
Your PDP has a simple, easy-to-use menu system that appears on the PDP screen. This system allows...

23
Displaying Status Information
Press the INFO button on the remote control. 
The PDP will display the Picture mode, Sound mode, MTS,
Caption, and Clock.Air          4
Mono
V-Chip
Picture      :     Dynamic 
Sound       :    Custom
MTS       :    Stereo
Clock       :    12 : 00 am
CC 

24
Plug & Play Feature
The first time the television is powered ON, several basic settings proceed automatically 
and subsequently. The following settings are available.
1 
If the television is in standby mode, press the
POWER button on the remote control.
2 
Select the appropriate language by pressing the 
▲or ▼button.
3 
Press the ENTER button to confirm your choice.
4 
Press the ENTER button.
➤ ➤The message Start Plug & Play is displayed and then the 
Language menu is automatically displayed.
➤ ➤The...

5
Select the correct signal source (Air, STD, HRC, and
IRC) by pressing the ▲or ▼button, then press the 
ENTER button.
6 
To start the channel search, press the ENTER button.
7
Press the ENTER button. 
Press the œor √button to move to the Hour, Minute,
or am/pm.
Set the Hour, Minute, or am/pm by pressing the 
▲or ▼button.
Press the ENTER button. 
8
When it has finished, the message “Enjoy your
watching.” is displayed, and the channels which  
have been stored can be viewed.
25
➤ ➤The search will end...

26
Plug & Play Feature (continued)
If you want to reset this feature...
1 
Press the MENU button. Press the ▲or ▼button to
select “Setup”, then press the ENTER button. 
2 
Press the ▲or ▼button to select “Miscellaneous”,
then press the ENTER button.
3 
Press the ▲or ▼button to select “Plug & Play”.
Press the ENTER button.
4 
For further details on how to set the “Plug & Play”
feature, refer to the previous page.
Note
•Plug and Play can only be accessed in the TV mode.
Language : English√
Time√
Caption√...

27
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal
source that is connected to the PDP (i.e., an antenna or a cable system).
1 
Press the MENU button. Press the ▲or ▼button to
select “Channel”, then press the ENTER button.
2 
Press the ENTER button to select “Air/CATV”.
3 
Press the ▲or ▼button to select  “Air”, “STD”,
“HRC”, or “IRC”, then press the ENTER button. 
• If you are connected to an antenna, leave “Air”...

28
Storing Channels in Memory (Automatic Method)
1
First, select the correct signal source (Air, STD, HRC, 
and IRC). See steps on previous page.
Press the MENU button. Press the 
▲or ▼button to 
select “Channel”, then press the ENTER button. 
2
Press the ▲or ▼button to select “Auto Program”,
then press the ENTER button.
3
Press the ENTER button. 
The PDP will begin memorizing all of the available 
channels. 
After all the available channels are stored, the Auto
program menu reappears. 
Press the ENTER...

29
Adding and Erasing Channels (Manual Method)
First, press the CH  or CH  button or the number buttons
to select the channel you want to add or delete.
1 
Press the MENU button. Press the ▲or ▼button to
select “Channel”, then press the ENTER button.
2 
Press the ▲or ▼button to select “Add/Delete”,
then press the ENTER button.
Repeatedly pressing ENTER button will alternate 
between “Add” and “Delete”.
Press the CH or CH button to change 
channels you want to add or delete. 
3 
Press the MENU button to...

30
To View Memorized Channels (PIP Mode)
1
Press the MENU button. Press the ▲or ▼button to
select “Channel”, then press the ENTER button.
2
Press the ▲or ▼button to select “Scan”, then press
the ENTER button.
Only the memorized channels are chosen. 
3
Press the MENU button to stop.
Air/CATV : Air√
Auto Program√
Add/Delete√
Fine Tune√
LNA : On√
Scan√
Channel TV
MoveEnterReturn
Scan
Return
Air     4
➤ ➤When Channel scan starts, PIP mode will be activated automatically.
The screen will remain in PIP mode...