Samsung Plasma Display HP-P3761 User Manual

61
1 
Press the MENU button. Press the ▲or ▼button to
select “Sound”, then press the ENTER button. 
2
Press the ▲or ▼button to select “Auto Volume”,
then press the ENTER button.
3 
Press the ▲or ▼button to select “On”, then press
the ENTER button. 
• Pressing the ▲or ▼button will alternate 
between “On” and “Off”. 
4 
Press the MENU button to exit.
Using the Auto Volume
Each broadcasting station has its own signal conditions, which can make it necessary to
adjust the volume every time the channel is...

62
Setting TruSurround XT
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1
multichannel content over two speakers. TruSurround delivers a compelling, virtual surround
sound experience through any two-speaker playback system, including internal television
speakers. It is fully compatible with all multichannel formats.
1 
Press the MENU button. Press the ▲or ▼button to
select “Sound”, then press the ENTER button.
2
Press the ▲or ▼button to select “SRS TSXT”, then
press the...

Listening to the Sound of the 
Sub(PIP) Picture
When the PIP feature is activated, you can listen to the sound of the sub picture.
63
1 
Press the MENU button. Press the ▲or ▼button to
select “Picture”, then press the ENTER button.
2
Press the ▲or ▼button to select “PIP”, then press
the ENTER button.
3 
Press the ▲or ▼button to select “Sound Select”,
then press the ENTER button.
•Pressing the ▲or ▼button will alternate between
“Main” and “Sub”.
4
Set to Sub by pressing the ▲or ▼button. 
•You can listen...

64
Selecting the Internal Mute
The internal speakers can be muted in order to hear sound from external speakers
youve connected.
1
Press the MENU button. Press the ▲or ▼button to
select “Sound”, then press the ENTER button.
2
Press the ▲or ▼button to select “Internal Mute”,
then press the ENTER button.
3
Press the ▲or ▼button to select “On”, then press
the ENTER button.
• Pressing the ▲or ▼button will alternate between 
“On” and “Off”.
4 
Press the MENU button to exit.
Mode : Custom√Custom√MTS :...

PLASMA DISPLAY PANEL
Channel Control
Fine Tuning Channels ....................................................................66
LNA (Low Noise Amplifier) ............................................................67 

66
Fine Tuning Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1
Press the MENU button. Press the ▲or ▼button to
select “Channel”, then press the ENTER button.
2 
Press the ▲or ▼button to select “Fine Tune”, then
press the ENTER button.
3 
Press the œ or√ button to adjust the fine tuning.
4
To store the fine tuning setting in the TV’s memory,
press the ENTER button. (A star icon(*) will 
appear.) To reset the fine tuning to “0”, press the ▼
button to select...

67
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve the
reception (a low-noise preamplifier boosts the incoming signal).
1
Press the MENU button. Press the ▲or ▼button to
select “Channel”, then press the ENTER button.
2 
Press the ▲or ▼button to select “LNA”, then press
the ENTER button.
3
Press the ▲or ▼button to select “On”, then press
the ENTER button.
• Pressing the ▲or ▼button will alternate between 
“On” and “Off”.
4 
Press the MENU...

PLASMA DISPLAY PANEL
Time Setting
Setting the Clock .......................................................................70
Setting the Sleep Timer ...............................................................71
Setting the Timers ......................................................................72 

Setting the Clock
1
Press the MENU button. Press the ▲or ▼button to
select “Setup”, then press the ENTER button.
2
Press the ▲or ▼button to select “Time”, then press
the ENTER button.
3
Press the ENTER button to select “Clock”, then press 
the ▲or ▼button to select correct hour.
4 
Press the √button to select “Minute”, then press the
▲or ▼button to select correct minute.
5 
Press the √button to select “am/pm”, then press the
▲or ▼button to select the proper time of day 
(am or pm). 
Press the ENTER...