Samsung Plasma Display HP-P3761 User Manual

Owner’s Instructions
HP-P3761
This device is a Class B digital apparatus. 

2
Important Warranty Information
Regarding Television Format Viewing
Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily
designed to view wide screen format full-motion video. The images displayed on them should primarily be
in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the
images are constantly moving. Displaying stationary graphics and images on screen, such as the dark
side-bars on nonexpanded...

3
Screen Image retention
Do not display a still image (such as on a video game) on the plasma display panel for more than
several minutes as it can cause screen image retention. This image retention is also known as
“screen burn”. To avoid such image retention, refer to page 38 of this manual to reduce the 
degree of brightness and contrast of the screen when displaying a still image.
Altitude
The PDP will not operate normally at altitudes above 6500 ft.
Heat on the top of the PDP TV
The top side of the...

General Information
Your New Plasma Display Panel ......................6
Remote Control Buttons ..................................8
Wall Installation Instructions ..........................10
How to Assemble the Stand-Base ..................12
Connections
Connecting VHF and UHF Antennas ..............14
Connecting Cable TV ..................................15
Connecting a VCR ......................................17
Connecting a Camcorder ............................18
Connecting a DVD Player...

PLASMA DISPLAY PANEL
General Information
Your New Plasma Display Panel ......................................................6
Remote Control Buttons ..................................................................8
Wall Installation Instructions ..........................................................10
How to Assemble the Stand-Base....................................................12 

Front Panel
Your New Plasma Display Panel
6
ŒSOURCE (TV, AV1, AV2, S-VIDEO, COMPONENT1, 
COMPONENT2, and DVI) 
External input selection.
´MENUMenu display.
ˇ-VOL+
Volume adjustment. Also used to select or adjust 
items on the on-screen menu.
¨CHChannel selection. Also used to move up or down 
in the on-screen menu.
ˆConfirm your choice (Store or Enter).
ØPress to turn the PDP on and off.
Power Indicator- Power Off : Blue
- Power On : Off
∏Remote Control Signal ReceiverAim the remote control towards this...

7
Rear Panel
ŒDVI INPUT (DVI-D / L-AUDIO-R)
Connect to the digital video and audio 
output jack of a device with DVI output.
• DVI Video Input terminal (Not 
compatible with PC)
´MONITOR OUT (VIDEO / L-AUDIO-R)
Outputs for external devices.
ˇONLY FOR SERVICE 
Connector for service only.
¨S-VIDEO / L-AUDIO-R (AV2)
Video and audio inputs for external 
devices with an S-Video output, such as 
a camcorder or VCR.
ˆVIDEO / L-AUDIO-R (AV1, AV2)
Video and audio inputs for external
devices, such as a camcorder...

Remote Control Buttons
ŒPOWER buttonTurns the PDP on and off.
´ASPECT buttonChanges the screen size.
ˇNumber buttons
¨+100 button
Press to select channels over 100. For example, to select
channel 121, press “+100”, then press “2” and “1.”
ˆMUTE buttonMutes the PDP sound.
ØVOL (Volume) buttonsAdjust volume.
∏SLEEP buttonSelects a preset time interval for automatic shutoff.
”MENU buttonDisplays the main on-screen menu.
’ENTER buttonConfirms a selection. 
˝PIP buttonActivates picture in picture.
ÔSTILL...

¸SRS TSXT button
Selects TruSurround XT mode.
˛MTS buttonChooses stereo, mono or Separate Audio Program
(SAP broadcast).
◊AUTO PROG. buttonThe TV automatically cycles through all of the 
available channels and stores them in memory. 
±ADD/DEL buttonAdds or deletes channels in the TV’s memory.
≠DNIe buttonActivates DNIe (Digital Natural Image engine).
–CAPTION button
Controls the caption decoder.
—SET buttonUsed during set up of this Samsung remote control, 
so that it will work compatibly with other...

Wall Installation Instructions
1 
Do not install the PDP on any location other than a vertical wall.
2 
To protect the performance of the PDP and prevent problems, avoid the following locations:
• Next to smoke and fire detectors.
• Areas subjected to vibration or high voltage.
• Near or around any heating apparatus.
3 
Use only recommended parts and components.
10
Installation Notes
Parts (Wall attachment panel is sold separately. Check with your dealer.)
Screws ; 4 EAPlastic Hanger ; 4 EA
Wall Mount...