Samsung Plasma Display HP-P3761 User Manual
Have a look at the manual Samsung Plasma Display HP-P3761 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
PLASMA DISPLAY PANEL Operation Turning the PDP On and Off ..........................................................22 Plug & Play Feature ......................................................................24 Memorizing the Channels..............................................................27 Setting Up Your Remote Control ....................................................32 Viewing an External Signal Source ................................................34
Turning the PDP On and Off 22 Turning the PDP On and Off Press the POWER button on the remote control. The PDP will be turned on and you will be ready to use its features. You can also use the POWER ( ) button on the front of the PDP. Note •If your PDP isn’t turned on when the power button is pressed: Press the MODEbutton to check if the TV mode has been chosen ( ). Viewing the Menus and Displays Your PDP has a simple, easy-to-use menu system that appears on the PDP screen. This system allows convenient access to the PDP features. Viewing the Menus 1 With the power on, press the MENU button on the remote control. The main menu appears on the screen. The Input menu is selected. 2 Press the ▲or ▼button to move to items in the menu. Press the œ/ √/ ENTER buttons to display, change, or use the selected items. Press the ENTER ( ) button to enter items in the menu. On screen menus disappear from the screen automatically after about thirty seconds, or you can press the MENU or EXIT button on your remote control to exit the menu. Source List : TV√ Edit Name√ Input TV MoveEnterReturn
23 Displaying Status Information Press the INFO button on the remote control. The PDP will display the Picture mode, Sound mode, MTS, Caption, and Clock.Air 4 Mono V-Chip Picture : Dynamic Sound : Custom MTS : Stereo Clock : 12 : 00 am CC
24 Plug & Play Feature The first time the television is powered ON, several basic settings proceed automatically and subsequently. The following settings are available. 1 If the television is in standby mode, press the POWER button on the remote control. 2 Select the appropriate language by pressing the ▲or ▼button. 3 Press the ENTER button to confirm your choice. 4 Press the ENTER button. ➤ ➤The message Start Plug & Play is displayed and then the Language menu is automatically displayed. ➤ ➤The message Check antenna input is displayed. Language MoveEnterSkip English Français Español Plug & Play EnterSkip Check antenna input. Start Plug & Play. Start Plug & Play EnterExit
5 Select the correct signal source (Air, STD, HRC, and IRC) by pressing the ▲or ▼button, then press the ENTER button. 6 To start the channel search, press the ENTER button. 7 Press the ENTER button. Press the œor √button to move to the Hour, Minute, or am/pm. Set the Hour, Minute, or am/pm by pressing the ▲or ▼button. Press the ENTER button. 8 When it has finished, the message “Enjoy your watching.” is displayed, and the channels which have been stored can be viewed. 25 ➤ ➤The search will end automatically. Channels are sorted and stored in an order which reflects their position in the frequency range (with lowest first and highest last). When it has finished, the Clock Set menu is displayed. ➤ ➤To stop the search before it has finished or return to normal viewing, press the MENU button. Air/CATV Air STD HRC IRC Auto Program EnterSkip Start Auto Program EnterSkip Air 10 Stop MoveEnterSkip Enjoy your watching. Clock Skip Hour Minute am/pm MoveAdjust 1200am
26 Plug & Play Feature (continued) If you want to reset this feature... 1 Press the MENU button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or ▼button to select “Miscellaneous”, then press the ENTER button. 3 Press the ▲or ▼button to select “Plug & Play”. Press the ENTER button. 4 For further details on how to set the “Plug & Play” feature, refer to the previous page. Note •Plug and Play can only be accessed in the TV mode. Language : English√ Time√ Caption√ Digital NR : On√ V-Chip√ Miscellaneous√ Color Weakness : Off√ Screen Burn Protection√ Setup TV MoveEnterReturn Melody : On√ Plug & Play√ Blue Screen : Off√ Miscellaneous TV MoveEnterReturn Start Plug & Play. Start Plug & Play ReturnEnter
27 Selecting the Video Signal-source Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the PDP (i.e., an antenna or a cable system). 1 Press the MENU button. Press the ▲or ▼button to select “Channel”, then press the ENTER button. 2 Press the ENTER button to select “Air/CATV”. 3 Press the ▲or ▼button to select “Air”, “STD”, “HRC”, or “IRC”, then press the ENTER button. • If you are connected to an antenna, leave “Air” displayed. If you connected cable, press the ▲or ▼button to the display the type of cable system: “STD”, “HRC” or “IRC”. (If you are not sure which type of cable system you have, contact your cable company). 4 Press the MENU button to exit. Note •STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to “Storing Channels in Memory” (Next page). Memorizing the Channels Your PDP can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual). Air/CATV : Air√ Auto Program√ Add/Delete√ Fine Tune√ LNA : On√ Scan√ Channel TV MoveEnterReturn Air/CATV :Air Auto Program Add/Delete Fine Tune LNA : On Scan Channel TV MoveEnterReturn Air STD HRC IRC Air/CATV :Air Auto Program Add/Delete Fine Tune LNA : On Scan Channel TV MoveEnterReturn Air STD HRC IRC
28 Storing Channels in Memory (Automatic Method) 1 First, select the correct signal source (Air, STD, HRC, and IRC). See steps on previous page. Press the MENU button. Press the ▲or ▼button to select “Channel”, then press the ENTER button. 2 Press the ▲or ▼button to select “Auto Program”, then press the ENTER button. 3 Press the ENTER button. The PDP will begin memorizing all of the available channels. After all the available channels are stored, the Auto program menu reappears. Press the ENTER button to stop. 4 Press the MENU button to exit. Note •The PDP automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes. ➤ ➤Quick way to access the Automatic Channel Setting: Just press the “AUTO PROG.” button on the remote control. Air/CATV : Air√ Auto Program√ Add/Delete√ Fine Tune√ LNA : On√ Scan√ Channel TV MoveEnterReturn Air/CATV : Air√ Auto Program√ Add/Delete√ Fine Tune√ LNA : On√ Scan√ Channel TV MoveEnterReturn Auto Program EnterReturn Start
29 Adding and Erasing Channels (Manual Method) First, press the CH or CH button or the number buttons to select the channel you want to add or delete. 1 Press the MENU button. Press the ▲or ▼button to select “Channel”, then press the ENTER button. 2 Press the ▲or ▼button to select “Add/Delete”, then press the ENTER button. Repeatedly pressing ENTER button will alternate between “Add” and “Delete”. Press the CH or CH button to change channels you want to add or delete. 3 Press the MENU button to exit. Note •You can view any channel (including an erased channel) by using the number buttons on the remote control. Air/CATV : Air√ Auto Program√ Add/Delete√ Fine Tune√ LNA : On√ Scan√ Channel TV MoveEnterReturn Air/CATV : Air√ Auto Program√ Add/Delete√ Fine Tune√ LNA : On√ Scan√ Channel TV MoveEnterReturn Add/Delete EnterReturn Air 4 Deleted Add Change ➤ ➤Quick way to access the Adding and Erasing Channels : Just press the “ADD/DEL” button on the remote control.
30 To View Memorized Channels (PIP Mode) 1 Press the MENU button. Press the ▲or ▼button to select “Channel”, then press the ENTER button. 2 Press the ▲or ▼button to select “Scan”, then press the ENTER button. Only the memorized channels are chosen. 3 Press the MENU button to stop. Air/CATV : Air√ Auto Program√ Add/Delete√ Fine Tune√ LNA : On√ Scan√ Channel TV MoveEnterReturn Scan Return Air 4 ➤ ➤When Channel scan starts, PIP mode will be activated automatically. The screen will remain in PIP mode when the SCAN has finished. Press the PIP button to exit PIP mode.