Samsung ML 2851ND User Manual

9.9   
Wrinkles or 
creases• Ensure that the paper is loaded properly.
• Check the paper type and quality. See page 
4.2.
• Turn over the stack of paper in the tray. Also 
try rotating the paper 180° in the tray.
Back of 
printouts are 
dirty• The transfer roller may be dirty. See page 8.1.
• Check for leaking toner. Clean the inside of 
the printer. 
Solid black 
pages• The toner cartridge may not be installed 
properly. Remove the cartridge and reinsert.
• The toner cartridge may be defective and 
need...

9.10   
Common PostScript problems
The following situations are PostScript language specific and may occur 
when several printer languages are being used.“Fail To Print,” “A 
printer timeout error 
occurred,” 
messages appear.These messages may appear during printing. 
Just keep waiting until the printer finishes 
printing. If the message appears in standby 
mode or after printing has been completed, 
check the connection and/or whether an error 
has occurred.
Note
• Refer to Microsoft Windows User’s...

9.11   
Common Macintosh problems
ConditionSuggested solutions
The printer does not 
print PDF file correctly. 
Some parts of graphics, 
text, or illustrations are 
missing.Incompatibility between the PDF file and 
the Acrobat products:
Printing the PDF file as an image may 
solve this problem. Turn on Print As 
Image from the Acrobat printing options.
Note: It will take longer to print when you 
print a PDF file as an image.
The document has 
printed, but the print job 
has not disappeared 
from the...

10.1   
10 Installing accessories
Your machine is a full-featured model that has been optimized to meet 
most of your printing needs. Recognizing that each user may have 
different requirements, however, Samsung makes several accessories 
available to enhance your machine’s capabilities.
This chapter includes:
• Precautions to take when installing accessories
• Installing a memory module
Precautions to take when installing accessories
Disconnect the power cord
Never remove the control board cover while...

10.2   
6Replace the control board cover.
7Reconnect the power cord and printer cable, and turn the machine 
on.
Note
To release the memory module, pull the two tabs on the 
sides of the slot outwards, then the module springs out. 
Activating the added memory in the PS printer 
properties
After installing the memory module, you need to select it in the printer 
properties of the PostScript printer driver in order to use it.
1Make sure that the PostScript printer driver is installed on your 
computer. For...

11.1   
11 Specifications
Printer specifications
ItemSpecifications and description
Printing speed
aUp to 28 ppm in A4 (30 ppm in Letter)
Duplex: 14 ipm  in A4 (14.5 ipm in Letter)
Resolution
Up to 1200 x 1200 dpi effective output
Warm-up time
Less than 8 seconds
First print out 
time
8.5 seconds (From Ready)
Sleep mode: 15.5 seconds
Power rating
AC 110 - 127 V or AC 220 - 240 V
See the Rating label on the machine for the correct 
voltage, frequency (hertz) and type of current for 
your machine.
Power...

1
INDEX
A
accessories, order information  7.1
C
cleaning
inside
  8.1
outside
  8.1
component location
  1.2
configuration page, print
  8.4
control panel
LED
  9.5
overview
  1.3
D
demo page, print  2.1
J
jam, clear  9.1
L
LED, meaning  1.3
Linux problems
  9.10
loading paper
tray 1/optional tray 2
  5.5
M
Macintosh problems  9.11
maintenance parts
  8.4
manual feed mode, use
  5.6
memory module
installing
  10.1
N
network operating systems  4.1
O
output location  5.7
P
paper guidelines  5.3
paper jam,...

Samsung Printer
Software section
Downloaded From ManualsPrinter.com Manuals 

1
SOFTWARE SECTION 
C
ONTENTS
Chapter 1: INSTALLING PRINTER SOFTWARE IN WINDOWS
Installing Printer Software  ........................................................................................................  4
Installing Software for Local Printing  .................................................................................  4
Installing Software for Network Printing .............................................................................  7
Reinstalling Printer Software...

2
Using an Existing Watermark  .........................................................................................  21
Creating a Watermark  ...................................................................................................  21
Editing a Watermark  .....................................................................................................  21
Deleting a Watermark  ...................................................................................................  21
Using...