Samsung ML 2851ND User Manual

4.3   
Guidelines for selecting and storing print media
When selecting or loading paper, envelopes, or other print media, keep 
these guidelines in mind:
• Always use print media that conform with the specifications listed on 
the next column.
• Attempting to print on damp, curled, wrinkled, or torn paper can cause 
paper jams and poor print quality.
• For the best print quality, use only high quality copier grade paper 
specifically recommended for use in laser printers.
• Avoid using the following...

4.4   
Transparencies • To avoid damaging the printer, use only 
transparencies designed for use in laser 
printers.
• Transparencies used in the printer must be able 
to withstand the machine’s fusing temperature. 
Check your machine’s specification to view the 
fusing temperature, see page 11.1.
• Place them on a flat surface after removing 
them from the printer.
• Do not leave them in the paper tray for long 
periods of time. Dust and dirt may accumulate 
on them, resulting in spotty printing.
• To...

4.5   
Using the tray 1 or the optional tray 2
Use the print material you use for the majority of your print jobs in the 
tray 1. The tray 1 can hold a maximum of 250 sheets of 75 g/m2 paper.
You can purchase an optional tray 2 and attach it below the tray 1 to load 
an additional 250 sheets of paper.
To load paper, pull open the tray and load paper with the side to be 
printed on face down.
You can load letterhead paper with the design side face down. The top 
edge of the sheet with the logo should be...

4.6   
Notes
• Do not push the paper width guide far enough to cause the 
material to warp. 
• If you do not adjust the paper width guide, it may cause paper 
jams.
Using manual feeder
You can manually load a sheet of print media in the manual tray if you 
select Manual Feeder in the Source option from the Paper tab when you 
change print settings to print a document. See the Software Section. 
Manually loading paper can be helpful when you want to check the print 
quality after each page is printed....

4.7   
Printing with a prescribed paper size
Caution
• Do not use print media that does not meet the media 
specifications in the user’s guide, it can damage the machine. 
When using the media that meets the specification, set the paper 
to the right tray in the printer property. 
Region Country mm
N.A. US101 x 152(4 x 6)
UK178 x 210
Italy152 x 197
Austria99 x 210
Netherlands148 x 105
Swiss -
Hungary100 x 203
Min. 90 x 110
Max. 200 x 215
Slo va kia104 x 148
Czec h107 x 147
Prescription (Recept)
98 x 220...

5.1   
5 Network setup(ML-2851ND only)
This chapter gives you basic information for setting up your printer for 
network connections.
This chapter includes:
• Introduction
• Supported operating systems
• Using SetIP program
Introduction
Once you have connected your printer to a network with an RJ-45 
Ethernet cable, you can share the printer with other network users.
You need to set up the network protocols on the printer to use it as your 
network printer. Protocols can be set up by the following...

6.1   
6 Basic printing
This chapter explains common printing tasks. 
This chapter includes:
• Printing a document
• Canceling a print job
Printing a document
This printer allows you to print from various Windows, Macintosh, or 
Linux applications. The exact steps for printing a document may vary 
depending on the application you use. 
For details about printing, see the Software Section.
Canceling a print job
If the print job is waiting in a print queue or print spooler, such as the 
printer group in...

7.1   
7 Ordering supplies and 
accessories
This chapter provides information on the toner cartridge and accessory 
that are available for your printer.
This chapter includes:
• Toner cartridge
• Accessory
• How to purchase
Toner cartridge
When the toner runs out, you can order the following type of toner 
cartridge for your printer:
Ty p eYielda
a. Declared yield value in accordance with ISO/IEC 19752.
Part number
Standard yield  Approx.2,000 pages ML-D2850A
High yield Approx.5,000 pages ML-D2850B...

8.1   
8 Maintenance
This chapter provides information for maintaining your printer and the 
toner cartridge.
This chapter includes:
• Cleaning the printer
• Maintaining the toner cartridge
• Printing a configuration page
• Maintenance parts
Cleaning the printer
During the printing process, paper, toner, and dust particles can 
accumulate inside the printer. This buildup can cause print quality 
problems, such as toner specks or smearing. 
Cleaning the outside of the printer
Clean the cabinet of the...

8.2   
Tabs on the sides of the cartridge and corresponding grooves 
within the printer will guide the cartridge into the correct position 
until it locks into place completely.
6Close the front cover. Make sure that the cover is securely closed.
7Plug in the power cord and turn the printer on.
Maintaining the toner cartridge
Toner cartridge storage
Toner cartridges contain components that are sensitive to light, 
temperature, and humidity. Samsung suggests users follow the 
recommendations to ensure the...