Samsung ML 2010 User Manual

SPECIFICATIONS6.6
Paper Specifications
Paper Output Capacity
CategorySpecifications
Acid Content 5.5 ~ 8.0 pH
Caliper 0.094 ~ 0.18 mm (3.0 ~ 7.0 mils)
Curl in Ream Flat within 5 mm (0.02 in.)
Cut Edge ConditionsCut with sharp blades with no visible 
fray.
Fusing CompatibilityMust not scorch, melt, offset, or release 
hazardous emissions when heated to 
200 °C (392 °F) for 0.1 second.
Grain Long Grain
Moisture Content 4 % ~ 6 % by weight
Smoothness 100 ~ 250 Sheffield
Output TrayCapacity
Face-down output...

SPECIFICATIONS6.7
6
Printer and Paper Storage Environment
Paper storage environmental conditions directly affect the feed 
operation.
Ideally, the printer and paper storage environment should be at 
or near room temperature, and not too dry or humid. Remember 
that paper is hygroscopic; it absorbs and loses moisture rapidly.
Heat works with humidity to damage paper. Heat causes the 
moisture in paper to evaporate, while cold causes it to condense 
on the sheets. Heating systems and air conditioners...

1
INDEX
C
cancel, print 3.10
card, print 3.9
clean, printer 4.6
connect
power cord
 2.10
USB cable 2.9
control panel, use 1.6
D
demo page, print 2.11
E
envelopes, print 3.8
error, solve 5.17
I
install, toner 2.4
L
labels, print 3.8
load paper 2.7, 3.6
M
Macintosh
common problems
 5.18
O
output tray 3.6
P
paper guidelines 3.3
paper jams, clear 5.6
paper load capacity 3.3
paper load, in tray 2.7, 3.6
preprinted paper, print 3.10
print
demo page
 2.11
printer cable, connect 2.9
printer, clean 4.6
problem...

2
transparencies, print 3.9
turn on, printer 2.10
U
unpack 2.2
USB cable, connect 2.9
Downloaded From ManualsPrinter.com Manuals 

Samsung Printer
Software User’s Guide
Downloaded From ManualsPrinter.com Manuals 

1
CONTENTS
Chapter 1: INSTALLING PRINTER SOFTWARE IN WINDOWS
Installing Printer Software  ........................................................................................................  3
Changing the Software Language  ..............................................................................................  4
Reinstalling Printer Software  .....................................................................................................  5
Removing Printer Software...

2
Using Overlays  ......................................................................................................................  17
What is an Overlay? ......................................................................................................  17
Creating a New Page Overlay  .........................................................................................  17
Using a Page Overlay...

Installing Printer Software in Windows
3
1Installing Printer 
Software in Windows
This chapter includes:
• Installing Printer Software
• Changing the Software Language
• Reinstalling Printer Software
•Removing Printer Software
Installing Printer Software
All applications should be closed on your PC before beginning 
installation. 
NOTE: If the “New Hardware Wizard” window appears during 
the installation procedure, click   in the upper right corner of 
the box to close the window, or click Cancel....

Installing Printer Software in Windows
4
2Choose the type of installation. 
• 
Typical: Installs the most common software for your 
printer. This is recommended for most users.
• 
Custom: Allows you to choose both the language of the 
software and the individual components you want to 
install. After selecting the language and the 
component(s), click 
Next.
• 
View User’s Guide: Allows you to view the User’s 
Guide. If your computer doesn’t have Adobe Acrobat, 
click on this option and it will...

Installing Printer Software in Windows
5
Reinstalling Printer Software
You can reinstall the software if installation fails.
1Start Windows.
2From the Start menu select Programs or All Programs 
→ your printer driver name → Maintenance.
Or place the CD-ROM into the CD-ROM drive.
3Select Repair.
You will see a component list so that you can reinstall any 
item individually.
NOTE: If your printer is not already connected to the 
computer, the following window will appear.
• After connecting the printer,...