Samsung LT-P326W TFL LCD Television User Manual

							English-58
OPERATION
3
Press the LEFT/RIGHTbuttons to select “Setup”.
Press the
UP/DOWNbuttons to On Timer “On”.(Repeatedly pressing
the UP/DOWNbuttons will alternate
between On and Off).
When finished, press the
ENTERbutton.
To deactivate the “On Timer,”
select “Off” during this step.
4
To set the Off time, 
press the UP/DOWNbuttons to select 
“Off Timer”.
Press the 
ENTERbutton and set the hours
and minutes. (Follow the
same procedure as in
steps 2 and 3 above).
5
When finished setting the timer, press the EXITbutton to exit. 
•Auto Power Off
When you set the timer on, your television will be turned
off if you do not operate any controls for 3 hours after
the TV has been turned on with the ‘Timer On’ function.
‘Auto power off ’ operates only when the TV has been 
turned on by the 'Timer on' function.
BN68-00653A-01Eng.qxd  5/7/04 9:05 AM  Page 58 
						

							English-59
OPERATION
Setting the Sleep Timer 
Set the timer for the TV to turn off at the preset time automatically.   
1
Press the MENUbutton
to display the on-screen
menu.
Press the
UP/DOWNbuttons
to select “Setup”, then
press the 
ENTERbutton.
Press the 
ENTERbutton to select “Time”.
3
Press theUP/DOWNbuttons
repeatedly until the 
correct time appears.
Press the 
EXITbutton
to exit.
2
Press theUP/DOWNbuttons
to select “Sleep Timer”,
then press the
ENTERbutton.
Sleep timer
BN68-00653A-01Eng.qxd  5/7/04 9:05 AM  Page 59 
						

							English-60
OPERATION
Misspellings and unusual 
characters sometimes occur during
closed caption transmissions, especially
those of live events. There may be a
small delay before captions appear
when you change channels. These are
not malfunctions of the TV.
3
Press the ENTERbutton.
In caption mode, captions
appear at the bottom of the screen,
and they usually cover only a small
portion of the picture. 
In 
text mode, information unrelated
to the program, such as news or
weather, is displayed. Text often 
covers a large portion of the screen.
4
Press the UP/DOWNbuttons to set caption 
“Off ” or “On”, then press the
ENTERbutton.
Viewing Closed Captions
Your TV decodes and displays the closed captions that are broadcast with certain TV shows.
These captions are usually subtitles for the hearing impaired or foreign-language translations.
All VCRs record the closed caption signal from television programs, so home-recorded
video tapes also provide closed captions. Most pre-recorded commercial video tapes provide
closed captions as well. Check for the closed caption symbol in your television schedule and
on the tape’s packaging :
. 
1
Press the MENUbutton to 
display the on-screen menu.
Press the 
UP/DOWNbuttons to select “Setup”,
then press the ENTER
button.
2
Press the UP/DOWNbuttons to select “Caption”, 
then press the ENTERbutton.
5Depending on the particular broadcast, it might be
necessary to alter the settings to “Channel” and “Field”.
Different channels and fields
display different information:
Field 2 carries additional
information that supplements
the information in Field 1.
(For example, Channel 1 may
have subtitles in English,
while Channel 2 has subtitles
in Spanish).
BN68-00653A-01Eng.qxd  5/7/04 9:05 AM  Page 60 
						

							English-61
8
Press the UP/DOWNbuttons to select “Field”,
then press the ENTERbutton.
Press the 
UP/DOWNbuttons to select “1” or “2”, 
then press the ENTERbutton.
Press the 
EXITbutton to
exit.
6
Press the UP/DOWNbuttons to select “Mode”,
then press the ENTERbutton.
Press the 
UP/DOWNbuttons to set “Cation” or
“Text”, then press the
ENTERbutton.
7
Press the UP/DOWNbuttons to select “Channel”,
then press the ENTERbutton.
Press the 
UP/DOWNbuttons to select “1” or “2”, 
then press the ENTERbutton.
OPERATION
BN68-00653A-01Eng.qxd  5/7/04 9:05 AM  Page 61 
						

							English-62
Using the V-Chip
The V-Chip feature automatically locks out programming that is deemed inappropriate for
children. The user must first enter a Pin (personal ID number) before any of the V-Chip
restrictions can be set up or changed. 
Setting Up Your Personal ID Number (PIN)
1
Press the MENUbutton
to display the menu.
Press the
UP/DOWNbuttons
to select “Setup”, then
press the 
ENTERbutton.
2Press theUP/DOWNbuttons
to select “V-Chip”, then
press the 
ENTERbutton.
3The “Enter Pin” screen
will appear. Enter your
4-digit Pin number.
Note: The default Pin
number for a new TV
set is
“0-0-0-0.”
4
After entering a valid
PIN number, the
“V-Chip” screen will
appear. Press the
UP/DOWNbuttons
to select “Change Pin”.
Note: If you forget the Pin,
press the remote-control
buttons(with the unit “Off”)
in the following
sequence,which resets the 
pin to 
0-0-0-0:
POWER OFF 
➔MUTE ➔
8 ➔2 ➔4 ➔POWER ON.
OPERATION
5Press the ENTERbutton.
The Change Pin screen 
will appear. Choose any
4-digits for your PIN and
enter them.
As soon as the 4 digits 
are entered, the “Confirm
New Pin” screen appears.
Re-enter the same 4 digits. 
When the Confirm screen 
disappears, your Pin has
been memorized. 
Press the 
EXITbutton to
exit. 
BN68-00653A-01Eng.qxd  5/7/04 9:05 AM  Page 62 
						

							English-63
How to Enable/Disable the V-Chip
Note : PIP operation is disabled when the V-chip is on.
1
Press the MENUbutton
to display the menu.
Press the
UP/DOWNbuttons
to select “Setup”, then
press the 
ENTERbutton.
2Press theUP/DOWNbuttons
to select “V-Chip”, then
press the 
ENTERbutton. 
3
The “Enter Pin” screen
will appear. Enter your
4-digit Pin number.
Note: The default Pin
number for a new TV
set is
“0-0-0-0.”
4
The “V-Chip” screen will
appear, and “V-Chip
Lock” will be selected.
To enable the V-Chip
feature, press the
UP/DOWNbuttons
so that the “V-Chip
Lock” is set to Yes.
(Pressing the
UP/DOWNbuttons
will alternate between
“On” and “Off ”.)
Press the 
EXITbutton
to exit. 
OPERATION
ol
Off”)
the 
E 
➔
ON.
BN68-00653A-01Eng.qxd  5/7/04 9:05 AM  Page 63 
						

							English-64
4Press the UP/DOWNbuttons to
select “TV Parental
Guidelines”, then press
the 
ENTERbutton.
5The “TV Parental Guidelines”screen will appear.
Press  the 
UP/DOWNbuttons to select one ofthe six age-based categories:
TV-Y Young children
TV-Y7 Children 7 and over
-------------------------------
TV-G General audience
TV-PG Parental guidance
TV-14 Viewers 14 and over
TV-MA Mature audience
OPERATION
Note: These categories consist of
two separate groups : TV-Y and
TV-Y7 (young children through
age 7), and TV-G through TV-MA
(everybody else).
The restrictions for these two
groups work independently:
If a household includes very young
children as well as young adults,
the TV guidelines must be set up
separately for each age group.
(See next step.)
How to Set up Restrictions Using the ‘TV Parental Guidelines’
First, set up a personal identification number (PIN), and enable the V-Chip.
(See previous section.) Parental restrictions can be set up using either of two methods:
The TV guidelines or the MPAA rating.
1Press the MENUbutton to
display the menu.
Press the 
UP/DOWNbuttons to select “Setup”,
then press the ENTERbutton.
2Press theUP/DOWNbuttons
to select “V-Chip”, then
press the 
ENTERbutton.
3The “Enter Pin” screen
will appear. Enter your
4-digit Pin number.
Note: The default Pin
number for a new TV
set is
“0-0-0-0.”
BN68-00653A-01Eng.qxd  5/7/04 9:05 AM  Page 64 
						

							English-65
OPERATION
5
At this point, one of the TV-Ratings is selected.
Depending on your existing setup, the color of the letter “U” or “B” will be highlighted
(changed to yellow). (U= Unblocked, B= Blocked)
When the color of the “U” or “B” is changed, press theENTER()button to block or unblock the
category.
To select a different TV-Rating, press the UP/DOWNbuttons and then repeat the process. 
To  
EXITthis screen, press MENU( ) again.
Note 1: The TV-Y7, TV-PG, TV-14 and TV-MA have additional options.
See the next step to change any of the following sub-ratings:
FV : Fantasy Violence
D   : Sexual suggestive Dialog
L : Adult Language
S   : Sexual situation
V   : Violence
Note 2: The V-Chip will automatically block certain categories that are “more restrictive.” 
For example, if you block “TV-Y” category, then TV-Y7 will automatically be blocked.
Similarly, if you block the TV-G category, then all the categories in the “young adult”
group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V)
work together similarly. (See next section.)
6
How to set the FV, D, L, S and V sub-ratings.
First, select one of these TV-Ratings: TV-Y7, TV-PG, TV-14 or TV-MA (See Step 4, on previous
page).
Next, while the TV-Rating is selected, repeatedly press the 
LEFT or RIGHTbuttons.
This will cycle through the available sub-ratings (FV,L, S, D or V).
A highlighted letter (“U” or “B”) will be displayed for each sub-rating. While the “U” or “B” is
highlighted, press the 
ENTER( ) button to change the sub-rating.
Press 
MENU( ) once to save the TV guidelines. 
To select a different TV-Rating, press the 
UP/DOWNbuttons and then repeat the process. 
To exit this screen, press 
MENU( ) once again.
Note: The V-chip will automatically block certain categories that are “More restrictive”.
For example, if you block the “L” sub-rating in TV-PG, then the “L” sub-ratings in TV-14
andTV-MA will automatically be blocked.
7
Press the MENUbutton to clear all the screens.
(Or proceed to the next section, and set up additional restrictions based on the MPAA codes).
BN68-00653A-01Eng.qxd  5/7/04 9:05 AM  Page 65 
						

							English-66
OPERATION
How to Set up Restrictions Using the MPAA Ratings:
G, PG, PG-13, R, NC-17, X
The MPAA rating system uses the Motion Picture Association of America (MPAA) system,
and its main application is for movies.
When the V-Chip lock is on, the TV will automatically block any programs that are coded
with objectionable ratings (either MPAA or TV-Ratings).
1
Press the MENUbutton to  
display the menu.
Press the 
UP/DOWNbuttons to select “Setup”,
then press the ENTERbutton.
Press the 
UP/DOWNbuttons to select “V-Chip”, 
then press the ENTERbutton.
2
The “Enter Pin” screen
will appear. Enter your
4-digit PIN number. 
Note: The default Pin
number for a new TV 
set is
“0-0-0-0.”
3
Press the UP/DOWNbuttons
to select “MPAA rating”,
then press the 
ENTERbutton.
BN68-00653A-01Eng.qxd  5/7/04 9:05 AM  Page 66 
						

							English-67
How to Reset the TV after the V-Chip
Blocks a Channel (‘Emergency Escape’)
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and
the following message will appear: “Excessive rating”.
To resume normal viewing, tune to a different channel using the number buttons. Under certain
conditions (depending on the rating of the local TV programs) the V-Chip might lock out all the
channels.
In this case, use the Menu button for an “emergency escape”:
Select the V-Chip on the Menu. Enter your PIN number, and press the 
ENTERbutton to
temporarily disable the V-Chip Lock.
4
Repeatedly press theUP/DOWNbuttons
to select a particular
MPAA category. (When a
category is selected, its
color changes to yellow.)
GGeneral audience (no restrictions).
PGParental guidance suggested.
PG-13PG-13 (Parents strongly cautioned).
RR (Restricted. Children under 17
should be accompanied by an adult).
NC-17No children under age 17. 
XX (Adults only).
NRNot rated.
OPERATION
Press theENTER()button to select “U” or “B”.
Press the 
MENU( )button four times to save the settings and to clear all screens.
Note: The V-Chip will automatically block any category that is “more restrictive”.
For example, if you block the “PG-13” category, then “R,” “NC-17,” and “X”will
automatically be blocked also.
BN68-00653A-01Eng.qxd  5/7/04 9:05 AM  Page 67