Samsung LT-P326W TFL LCD Television User Manual

							English-38
OPERATION
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically 
replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the “Blue screen” 
mode to “Off”.
1
Press the MENUbutton to
display the menu.
Press the 
UP/DOWNbuttons to select “Setup”,
then press the ENTERbutton.
2
Press the UP/DOWNbuttons to select “Blue
Screen”, then press the
ENTERbutton.
3
Press the UP/DOWNbuttons to set Blue Screen
“On” or “Off”.
Press the 
EXITbutton
to exit.
Pressing the UP/DOWN
buttons will alternate between
“On” and “Off”.
BN68-00653A-01Eng.qxd  5/7/04 9:04 AM  Page 38 
						

							English-39
OPERATION
Fine Tuning Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1
Press the MENUbutton to
display the menu.
Press the 
UP/DOWNbuttons to select “Channel”,
then press the ENTERbutton twice.
2
Press the UP/DOWNbuttons to selec “Fine Tune”,
then press the ENTERbutton.
3
Press the LEFT/RIGHTbuttons to adjust the fine
tuning.
4
To store the fine tuning
setting in the TV’s
memory, press the
ENTERbutton.
Press the 
EXITbutton
to exit.
If you do not store the fine-tuned
channel in memory, adjustments
are not saved.
Fine tuned channels that have
been saved are marked with an
asterisk “*”on the right-hand side
of the channel number in the
channel banner.
BN68-00653A-01Eng.qxd  5/7/04 9:04 AM  Page 39 
						

							English-40
OPERATION
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, sometimes the LNA function can
improve the reception (a low-noise preamplifier boosts the incoming signal).
1
Press the MENUbutton to
display the menu.
Press the 
UP/DOWNbuttons to select “Channel”,
then press the ENTERbutton.
2
Press the UP/DOWNbuttons to select “LNA”, 
then press the ENTERbutton.
3
Press the UP/DOWNbuttons to set LNA “On” or
“Off”.
Press the 
EXITbutton
to exit.
Pressing the UP/DOWN
buttons will alternate between
“On” and “Off”.
BN68-00653A-01Eng.qxd  5/7/04 9:04 AM  Page 40 
						

							English-41
OPERATION
Viewing Picture-in-Picture
This product has one built-in tuner, which does not allow PIP to function in the
same mode. For example, you cannot watch one TV channel in the main screen,
and a different one in the PIP screen. Please see ‘PIP Settings’below for details.
You can use the PIP feature to simultaneously watch two video sources.
Note: While V-Chip is in operation, the PIP function cannot be used.
Activating Picture-in-Picture
1Press  the MENUbutton  to
display the menu.
Press the 
UP/DOWNbuttons to select “Picture”, 
then press the ENTERbutton. 
Press the 
UP/DOWNbuttons to select “PIP” 
then press the ENTERbutton.
2
Press the ENTERbutton.
Press the 
UP/DOWNbuttons to select “On”.
If you turn the TV off while 
watching and turn it on again,
the PIP window will disappear.
Quick way to access
the PIP menu:
Simply press the PIP button
on the remote control.
T V
Move
Enter
Return
Mode:    CustomCustomColor Tone : NormalSize : WideDNIe : DNIe OnPIPMCC
Picture
 More
T V
Move
Enter
Return
PIP : OnSource : TVSwapSize :Position :Ch. :   Air            2
PIP
PIP Settings
Sub Picture
Main Picture
O
O
O
O
O
O
O
OO
O
O
O
O
O
O
OO
O
O
O
O
O
O
OO
O
O
X
X
X
X
XO
O
O
X
X
X
X
XO
O
O
X
X
X
X
XO
O
O
X
X
X
X
X O : PIP operates
X : PIP doesn’t operate
DVI
O
O
O
X
X
X
X
X
HDMI PC COMP 2 COMP 1 S-Video TV
TV
AV
S-Video
COMP 1
COMP 2
HDMI
DVI
PCAV
BN68-00653A-01Eng.qxd  5/7/04 9:04 AM  Page 41 
						

							English-42
OPERATION
3
Press the UP/DOWNbuttons to select “Source”, 
then press the ENTERbutton.
Select a source of the sub 
picture by pressing the
UP/DOWNbuttons and
press the 
ENTERbutton.
Swapping the Contents of the PIP and Main imageSelecting a Signal Source (External A/V) for PIP
5
Press the UP/DOWNbuttons to select “Ch.(Channel)”,
then press the ENTERbutton.You can select the channel
that you want to view through
sub picture by pressing the
UP/DOWNbuttons.
Changing the PIP Channel
6
Press the UP/DOWNbuttons to select “Position”, 
then press the ENTER
button.
Changing the Position of the PIP Window
7
Press the UP/DOWNbuttons to select “Size”,
then press the ENTERbutton.
Press the 
EXITbutton
to exit.
Changing the Size of the PIP Window
• When the PC is in energy saving mode, you cannot choose the PIP option.
• You may notice that the picture in the PIP window becomes slightly unnatural when you set the main   
screen to game or karaoke mode.   
• Switch the main screen and the PIP window for normal viewing.
T V
Move
Enter
Return
PIP : On
Source:
Swap
Size :
Position :
Ch. :PIP
TV
AV
S-Video
Component  1
Component  2
4
Press the UP/DOWNbuttons to select “Swap”, 
then press the ENTERbutton.
Note :If Connector is not connected, Source cannot be selected except TV. 
(in both main and sub-screen)
Source selection is possible only when Component 1, 
Component 2, HDMI, DVI, or PC is connected.
BN68-00653A-01Eng.qxd  5/7/04 9:04 AM  Page 42 
						

							English-43
OPERATION
DNIe (Digital Natural Image engine)
Samsung’s New Technology brings you more detailed images with contrast, 
white enhancement and 3D noise reduction.
2
Press the UP/DOWNbuttons to select “DNIe”,
then press the ENTERbutton.
1
Press the MENUbutton to
display the menu.
Press the 
UP/DOWNbuttons to select “Picture”,
then press the ENTERbutton.
• DNIe On: Improved picture mode as demonstrated by DNIe Demo is activated.
• DNIe Off: The mode is deactivated and the screen returns to it’s original condition.
• DNIe Demo: The screen shows the improved image on the left-hand side and
the original image on the right-hand side.
3
Press the UP/DOWNbuttons to select “DNIe On”,
“DNIe Off ”, “DNIe Demo”,
then press the 
ENTERbutton.
Press the 
EXITbutton 
to exit.
BN68-00653A-01Eng.qxd  5/7/04 9:04 AM  Page 43 
						

							3
Press the LEFT/RIGHTbuttons to select among the
various picture settings, then
press 
ENTER.
The Original picture (before
adjustment) is shown on the
left side, while the selected
mode is shown on the right.
English-44
OPERATION
1
Press the MENUbutton to 
display the menu.
Press the 
UP/DOWNbuttons to select “Picture”,
then press the ENTERbutton. 
Press the 
UP/DOWNbuttons to select “MCC” then
press the ENTERbutton.
2
Press the UP/DOWNbuttons 
to select “Easy Control”, 
then press the 
ENTERbutton.
MCC (My Color Control)
MCC allows users to adjust colors to their preference, by adjusting skin, sky and
grass tones using the predefined settings(Standard, Custom, Turkish Blue, Emerald
Green, and Indian Pink) without affecting other colors on the screen.
Easy Control
This function doesn’t work when 
Source is in PC mode, 
or DNIe is in off mode.
• The sources are displayed in the following order :
Turkish Blue - Emerald Green - Indian Pink - Standard - Custom  
BN68-00653A-01Eng.qxd  5/7/04 9:04 AM  Page 44 
						

							English-45
OPERATION
1
Press the MENUbutton to
display the menu.
Press the 
UP/DOWNbuttons to select “Picture”,
then press the ENTERbutton.
Press the 
UP/DOWNbuttons to select “MCC” then
press the ENTERbutton.
2
Press the UP/DOWNbuttons to select
“Detail Control”, then 
press the 
ENTERbutton.
Detail Control
3
Press the UP/DOWNbuttons to select the desired
MCC color and press the
ENTERbutton.
Press the 
LEFT/RIGHTbuttons to increase or
decrease the value of a
particular item.
Press the 
EXITbutton 
to exit.
This function doesn’t work 
when the Source is in PC mode, 
or DNIe is in off mode.
You can adjust skin, sky and 
grass tones without using the 
predefined settings in custom 
mode.
• The sources are displayed in the following order :
Skin Tone - Green Grass - Blue Sky- Reset
BN68-00653A-01Eng.qxd  5/7/04 9:05 AM  Page 45 
						

							English-46
OPERATION
I2C (Intelligent Image Control)
I2C (Intelligent Image Control) automatically detects the inputted 
visual signal and adjusts to create optimum contrast.
1
Press the MENUbutton
todisplay the menu.
Press the 
UP/DOWNbuttons to select “Picture”,
then press the ENTERbutton. 
2
Press the UP/DOWNbuttons 
to select “I2C”, then press 
the 
ENTERbutton.
3
Press the UP/DOWNbuttons to
select “On” or “Off”.
Press the 
EXITbutton
to exit.
This function doesn’t work 
when the Source is in PC mode, 
or DNIe is in off mode.
BN68-00653A-01Eng.qxd  5/7/04 9:05 AM  Page 46 
						

							English-47
OPERATION
IBC (Intelligent Brightness Control)
The IBC (Intelligent Brightness Control) adjusts the screen brightness automatically 
by using a light detecting sensor.
1
Press the MENUbutton to
display the menu.
Press the 
UP/DOWNbuttons to select “Picture”,
then press the ENTERbutton. 
2
Press the UP/DOWNbuttons to select “IBC”,
then press the ENTERbutton.
3
Press the LEFT/RIGHTbuttons to select “On” or 
“Off”.
Press the 
EXITbutton
to exit.
Screen brightness is
adjusted automatically depending
on the brightness of the 
surrounding environment.
This function doesn’t work 
when the Source is in PC mode.
BN68-00653A-01Eng.qxd  5/7/04 9:05 AM  Page 47