Samsung LT-P326W TFL LCD Television User Manual

English-28
OPERATION
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna)
and cable channels. After the available channels are memorized, use the CH and CH
buttons to scan through the channels. This eliminates the need to change channels by
entering the channel digits. There are three steps for memorizing channels: selecting a
broadcast source, memorizing the channels (automatic) and adding and deleting channels
(manual).
Selecting the Video...

English-29
OPERATION
3
Press the LEFT/RIGHTbuttons to select “Start”, then
press the ENTERbutton.
The TV will begin  memorizing
all of the available channels.
The TV automatically cycles
through all of the available
channels and stores them in
memory. This takes about
one to two minutes. 
Press 
ENTERat any time
to interrupt the memorization
process and return to the
Channel menu.
2
Press the UP/DOWNbuttons to select
“Auto Program”.
Press the 
ENTERbutton.
1
First, select the correct
signal source
(Air,...

English-30
OPERATION
Labeling Channels 
1
Press the MENUbutton to display 
the menu.
Press the 
UP/DOWNbuttons 
to select “Channel”, then press 
the 
ENTERbutton. 
Press the 
UP/DOWNbuttons 
to select “Name”, then press the
ENTERbutton.
2
Press the UP/DOWNbuttons 
to select a channel.
You can assign a name to a channel. 
Press the 
LEFT/RIGHTbuttons
to move to  “Labeling” and use 
the 
UP/DOWNbuttons to assign 
a name.
Repeat this procedure to enter up to
four characters.
Press the 
EXIT button to exit....

English-31
1Press the MENUbutton
to display the menu.
Press the UP/DOWNbuttons to select “Channel”,
then press the ENTERbutton. 
Press the UP/DOWNbuttons to select “Favorite
Channel”, then press the
ENTERbutton.
2Press the UP/DOWNbuttons to select your
favorite channels to watch
among the labeledchannels.
Press the 
ENTERbutton
to add a check mark to
set the channel as a favorite
channel.
Press the
EXITbutton when
done to exit.
To Set-up Your Channels
OPERATION
To Select Source
Use to select TV or other...

English-32
OPERATION
To Edit the Input Source Name
Name the input device connected to the input jacks to make your input source selection easier.
1
Press the MENUbutton to
display the on-screen menu.
Press the 
ENTERbutton
to select “Input”.
Press the 
UP/DOWNbuttons to select
“Edit Name”, then press
the 
ENTERbutton.
2
Press the UP/DOWNbuttons to select
“AV”, “S-Video”,
“Component1”,
“Component2”, “HDMI”,
“DVI”, or “PC” input jack,
then press the 
ENTERbutton.
3
Press the UP/DOWNbuttons to select...

English-33
OPERATION
Using Automatic Picture Settings
Your TV has four automatic picture settings (“Dynamic”, “Standard”, “Movie”, and
“Custom”) that are preset at the factory. You can activate either Dynamic, Standard,
Movie, or Custom by pressing P.MODE (or by making a selection from the menu).
Or, you can select “Custom” which automatically recalls your personalized picture settings.
• Choose Dynamicto increase the clarity and sharpness of the picture.
• Choose 
Standardfor the standard factory...

English-34
OPERATION
Customizing the Picture
You can use the on-screen menus to change the contrast, brightness, sharpness,
color and tint according to personal preference.
(Alternatively, you can use one of the “automatic” settings. See the previous page.)
3
Press the ENTERbutton to select “Contrast”,
“Brightness”, “Sharpness”,
“Color”, or “Tint”.
4
Press the LEFT/RIGHTbuttons to decrease or 
increase the value of a 
particular item. 
For example, if you select
“Contrast”, pressing 
RIGHTincreases it....

English-35
Using Automatic Sound Settings
Your TV has five automatic sound settings (“Standard”, “Music”, “Movie” “Speech” and
“Custom”) that are preset at the factory. You can select “Custom Sound”, which automatically
recalls your personalized sound settings. 
2
Press the UP/DOWNbuttons repeatedly to select
the “Standard”, “Music”,
“Movie”, “Speech”, or
“Custom” sound settings.
Press the 
EXITbutton
to exit.
1
Press the MENUbutton to
display the menu. 
Press the 
UP/DOWNbuttons to select “Sound”,
then...

English-36
OPERATION
2
Press the UP/DOWNbuttons to select
“Custom”, then press the
ENTERbutton.
1
Press the MENUbutton to
display the menu. 
Press the 
UP/DOWNbuttons to select “Sound”,
then press the ENTERbutton.
Customizing the Sound
The sound settings can be adjusted to suit your personal preference.
(Alternatively, you can use one of the “automatic” settings. See the previous page.)
3
Press the LEFT/RIGHTbuttons 
to select a particular item 
to be changed.
Press the 
UP/DOWNbuttons to increase or...

English-37
OPERATION
Selecting a Menu Language
2
Press the UP/DOWNbuttons to select “Language”.
Press the 
ENTERbutton.
1
Press the MENUbutton to
display the menu. 
Press the 
UP/DOWNbuttons to select “Setup”,
then press the ENTERbutton.
3
Press the UP/DOWNbuttons to select “English”,
“Français”, “Español”, or
“Português”.
Press the 
EXITbutton
to exit.
BN68-00653A-01Eng.qxd  5/7/04 9:04 AM  Page 37