Samsung LT-P326W TFL LCD Television User Manual

English-68
OPERATION
Color Weakness
This feature enables those with a color weakness to view images as
those with normal color vision do.The feature provides nine different color adjustment
layers for red, green and blue.
1
Press the MENUbutton to
display the on-screen menu.
Press the 
UP/DOWNbuttons to select “Setup”, then
press the ENTERbutton.
2
Press the UP/DOWNbuttons to select 
“Color Weakness”, then press
the 
ENTERbutton.
3
Press the ENTERbutton and then press 
the UP/DOWNbuttons to select 
“On”,...

English-69
OPERATION
Selecting the Melody
You can hear a melody sound when the television is powered on or off.
1
Press the MENUbutton to
display the on-screen menu.
Press the 
UP/DOWNbuttons to select “Setup”,
then press the ENTERbutton.
3
Press the UP/DOWNbuttons to select
“Off” or “On”. 
Press the 
EXITbutton 
to exit.
2
Press the UP/DOWNbuttons to select 
“Melody”, then press
the 
ENTERbutton.
BN68-00653A-01Eng.qxd  5/7/04 9:06 AM  Page 69 

English-70
Chapter Five
PC DISPLAY
Using Your TV as a Computer (PC) Display
How to Set up Your PC Software (Windows only)
The Windows display-settings for a typical computer are shown below.
However, the actual screens on your PC will probably look different, depending upon
your particular version of Windows and your particular video card. Even if your actual
screens look different, the same, basic set-up information will apply in most cases.
(If not, contact your computer manufacturer or Samsung...

English-71
How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video signals
the monitor receives.   The function also automatically fine-tunes the settings and
adjusts the frequency values and positions.  
Press the PC button on the remote control to select the PC mode.
PC DISPLAY
1
Press the MENUbutton to
display the menu.
Press the 
UP/DOWNbuttons to select “Setup”,
then press the ENTERbutton.
Press the 
UP/DOWNbuttons to select
“PC”, then press
the...

English-72
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by fine tuning alone, then do the frequency adjustments to
the utmost and fine tune again. After the noise has been reduced, re-adjust the picture
so that it is aligned on the center of screen.
Press the PC button on the remote control to select the PC mode.
Note:This function does not work in DVI-Digital mode.
PC DISPLAY
2
Press the ENTERbutton to...

English-73
Changing the Screen Position
Press the PC button on the remote control to select the PC mode.
PC DISPLAY
2
Press the UP/DOWNbuttons to select
“PC”, then press
the 
ENTERbutton.
Press the 
UP/DOWNbuttons to select
“Position”, then press
the 
ENTERbutton.
1
Press the MENUbutton to
display the menu.
Press the 
UP/DOWNbuttons to select “Setup”,
then press the ENTERbutton.
3Press the UP/DOWNbuttons to adjust
the V-Position.
Press the 
LEFT/RIGHTbuttons to adjust
the H-Position.
Press the...

English-74
To Initialize the Screen Position or Color Settings
Press the PC button on the remote control to select the PC mode.
PC DISPLAY
2
Press the UP/DOWNbuttons to select
“Image Reset”, then press
the 
ENTERbutton.
Press the 
EXITbutton 
to exit.
1
Press the MENUbutton 
to display the menu.
Press the 
UP/DOWNbuttons to select “Setup”,
then press the ENTERbutton.
Press the 
UP/DOWNbuttons to select
“PC”, then press
the 
ENTERbutton.
BN68-00653A-01Eng.qxd  5/7/04 9:06 AM  Page 74 

English-75
If the TV seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, call your nearest Samsung service center.
Identifying Problems
Problem
Poor picture
Poor sound quality.
No picture or sound.
No sound or sound is too low
at maximum  volume.
Picture rolls vertically.
The TV operates erratically.
The TV won’t turn on.
Remote control malfunctions
“Check Signal Cable” 
message.
Possible Solution
Try another channel.
Adjust the...

English-76
TROUBLESHOOTING
Problem
“Not Supported Mode!” 
message.
The image is too light or too
dark.
Horizontal bars appear to 
flicker, jitter or shimmer on
the image.
Vertical bars appear to flicker,
jitter or shimmer on the image.
Screen is black and power
indicator light blinks steadily.
Image is not stable and may
appear to vibrate.
Image is not centered on the
screen.
If a still image is displayed for
an extended period of time,
residual images or blurring
may appear. 
Possible Solution
Check the...

English-77
TROUBLESHOOTING
Problem Possible Solution
The Anynet does not function. Check to see if the device is an Anynet device.
The Anynet System supports only Anynet-enabled devices.
The Anynet System supports up to one device from the
Receiver product group and two devices from the DVD
product group. Check to see if the Anynet devices are plugged
in properly.
The remote control doesn’t
work.Check to see if the angle and the distance between the remote
control and the device are appropriate and if...