Samsung LT-P326W TFL LCD Television User Manual

English-8
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1
Plug the incoming
cable into the
ANT IN terminal
on back of the TV.
Because this TV is cable-ready,
you do not need a cable box to
view unscrambled cable channels.
2
Plug the combiner
into the ANT IN
terminal on the 
bottom of the
rear panel.
INSTALLATION
Antennas with 75-ohm Round Leads
1
Plug the antenna
lead into the 
ANT IN terminal
on the bottom of the
back panel.
Separate VHF...

English-9
INSTALLATION
Connecting to a Cable Box that Descrambles All Channels
1
Find the cable that is
connected to the
ANT OUT terminal 
on your cable box.
This terminal might be labeled
“ANT OUT”, “VHF OUT”, or
simply, “OUT”.
2
Connect the other end
of this cable to the
ANT IN terminal on
the back of the TV. 
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way...

English-10
4
Connect a coaxial
cable between the
ANT OUT terminal
on the cable box
and the B–IN 
terminal on the
A/B switch.
5
Connect another
cable between the
other OUT terminal
on the splitter and
the A–IN terminal on
the RF (A/B) switch.
6
Connect the last
coaxial cable
between the OUT
terminal on the RF
(A/B) switch and the
VHF/UHF terminal
on the rear of the TV.
INSTALLATION
After you’ve made this connection, set the A/B switch to the “A” position for normal
viewing. Set the A/B switch to the “B”...

English-11
Connecting HDMI
Supports connections between HDMI-connection-enabled AV devices (Set Top boxes, DVD
players, AV receivers and digital TVs).
What is HDMI? 
- HDMI, or high-definition multimedia interface, is a next-generation interface that enables the
transmission of digital audio and video signals using a single cable without compression. 
- 
HDMI allows multiple
channels of digital audio (5.1 channels).The difference between HDMIand DVIis that the
HDMIdevice is smaller in size, has...

English-12
INSTALLATION
AV OUT
3Connect a coaxial
cable between the
ANT OUT terminal 
on the VCR and 
the antenna terminal
on the TV.
AV OUT
4Connect a set of
audio cables
between the AUDIO
OUT jacks on the
VCR and the AUDIO
jacks on the TV.
AV OUT
5Connect a video
cable between the
VIDEO OUT jack on
the VCR and the
VIDEO jack on the
TV.
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
* Each external input source device has a different back panel configuration.
A...

English-13
INSTALLATION
AV OUT
3Connect an S-video
cable between the 
S-VIDEO OUT jack on
the VCR and the 
S-VIDEO INPUT jack
on the TV.
An S-video cable is usually included with an S-VHS VCR.
(If not, check your local electronics store.)
*  Each external input source device has a different back panel configuration.
AV OUT
1To begin, follow
steps 1–3 in the 
previous section to
connect the antenna
or cable to your
VCR and your TV.
Connecting an S-VHS VCR
Your Samsung TV can be connected to an S-Video...

English-14
INSTALLATION
Note: For an explanation of Component video, see your DVD player owner's manual.  
*  Each external input source device has a different back panel configuration.
Connecting a DVD Player
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
1Connect a set of audio
cables between the
COMPONENT1 or
COMPONENT2 L, R
AUDIO INPUT
jacks on the TV and
the AUDIO OUT jacks
on the DVD player.
2Connect a video cable
between the
COMPONENT1 or
COMPONENT2
(Y, P
B,...

English-15
INSTALLATION
Connecting a PC
Note: This figure shows the Standard Connector-jack panel.
The actual configuration on your TV may be different.
TV Rear panel
PC VIDEO CABLE ( D-SUB )

PC AUDIO CABLE 
-  Connect the D- Sub cable  to “PC (PC IN)” on the rear of your set. 
-  Connect the stereo audio cable  to “
AUDIO (PC IN)” on the rear of your set 
and the other end to “Audio Out” of the sound card on your computer.
BN68-00653A-01Eng.qxd  5/7/04 9:03 AM  Page 15  

English-16
INSTALLATION
1.What is the Anynet?
Anynet is an AV network system that enbles you to easily control Samsung audio-video (AV)
devices from your through the Anynet menu via a Samsung TV.
[ Anynet Features and Benefits ]
•Anynet allows you to access most features of any device connected to your TV set 
from a single remote control.
With Anynet, there is no need to use different remote controls for different devices.
Moreover, there is no need to press separate buttons to switch devices.
•Just...

English-17
INSTALLATION
2.Anynet
1. Anynet System is available only for Samsung Anynet-supported AV devices.
2. See below for Anynet-supported devices.
(All devices except for 2 and 4 are soon to be added)
3. All video cables are connected to the TV set.
4. Anynet System does not support more than one of the same type of devices.
5. One Anynet System menu can support up to two devices besides the TV.
6. Anynet System can support only one Home theater.
7. “Standard Connection” means a connection...