Samsung LCD TV LN-T4061F LN-T4065F Specifications

							
English - 
anynet+ menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
anynet+ menu description
Watch  tV
Switches from Anynet+ to TV broadcast mode.
(device_name)  menu
Shows the menu of the connected device. Example. When a DVD Recorder is connected, the DVD Recorder’s title menu appears.
(device_name)  operation
Shows the play control menu of the connected device. Example. When a DVD Recorder is connected, the play control menu of the DVD Recorder appears.
Connected to (device_name) your  tV connects to the corresponding device.
receiverSound is output through the receiver.
Setupyou can set the environment for using  anynet+.
tV  remote Control Buttons available in  anynet+ mode
device type operating Status available Buttons
anynet
+  device
After switching to the device, when the menu of the corresponding device is displayed on the screen.
Numeric buttons▲/▼/◄/►/ EntEr buttonsColor buttonsEXIT button
After switching to the device, while playing a file
◄◄ (Backward search)►►(Forward search)(Stop)►  (Play/Pause)
device with built-in  tuner
After switching to the device, when you are watching a TV programCH ▲/▼ button
audio  device
When Receiver is activatedVOL +/- buttonMUTE button
anyview
When watching TV►  (Play/Pause)
   The Anynet+ function only works when the remote control is set to TV.  The  rEC button works only in Watch TV status.    You cannot control Anynet+ devices using the buttons on the side of the TV. You can control Anynet+ devices only using the TV remote control.  The TV remote control may not work under certain conditions. In this case, r\
e-select the Anynet+ device.  The Anynet+ functions do not work withother manufacturers' products.  In Anynet+ mode, the color buttons may not work properly.
recording You can make a recording of a TV program using a recorder.
Press the  rEC button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
    The current TV program is recorded in the Watching TV status. If you are watching video from another device, the video from the device is recorded.

BN68-01178A-Eng.indd   792007-02-15   �� 8:59:07 
						

							
English - 0
listening through a receiver (home theater) You can listen to sound through a receiver instead of the TV speaker.
.    Press the  anynet+
 button. Press the ▲ or ▼ button to select Receiver, then press the  EntEr button.
.     Press the ◄ or ► button to select to On, then press the  EntEr
 button. Now you can listen to sound through the receiver.
.   Press the  ExIt
 button to exit.
  When the receiver is set to On, you can listen to the TV sound through the 2-channel receiver.     If the receiver is exclusively for a home theater only (supporting audi\
o only), it may not appear in the device list.  Only when you have connected the optical jack of the TV and the receiver properly, does Receiver work.  In case of a content with copyright problem, listening through the recei\
ver may not properly operate.
Check points before requesting Service 
SymptomSolution
anynet
+ does not work. ■   Check if the device is an Anynet+ device. The Anynet+ system supports Anyn et+ devices only.
■  Connect only one receiver (home theater).
■   Check if the Anynet+ device power cord is properly connected.
■   Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.
■   Check whether the TV remote control is in TV mode.
■   Check whether it is Anynet+ exclusive remote control.
■   Anynet+ doesn’t work at a certain condition. (Searching channels, Operating 
WISELINK)
I want to start  anynet
+.■   Check if the Anynet+ device is properly connected to the TV and check if the  Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu.
■     Press the  tV button on the TV remote control to switch to TV. Then press the 
anynet+ button to show the Anynet+ menu and select a menu you want.
I want to exit  anynet
+. ■   Select  Watch tV in Anynet+ menu. 
■     Press the  SourCE button on the TV remote control and select a device other than Anynet+ devices.
■    Press  Ch, Ch lISt, prE-Ch, etc. to change to the TV mode. (Note that the channel button operates only when a tuner-embedded Anynet+ device is not connect\
ed.)
the Connecting to  anynet+ 
device... message appears on the screen. ■   
You cannot use the remote control when you are configuring Anynet+ or swi tching to a view mode.
■    Use the remote control when the Anynet+ setting or switching to view mode i s 
complete.
t he  anynet
+ device does not play.You cannot use the play function when an auto channel scan is in progress or in WISELINK mode. Stop the currently running function.
the connected device is not 
displayed. ■ 
Check whether or not the device supports Anynet+ functions. 
■    Check whether or not the HDMI 1.3 cable is properly connected.
■   Check whether HDMI Control is set to On in the Anynet+ setup menu.
■   Search Anynet+ devices again.
■   You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HD MI 
cables may not support Anynet+ functions.
EnterExit
move recevier:  on
Connect 
recorderSetup
air 

BN68-01178A-Eng.indd   802007-02-15   �� 8:59:07 
						

							
English - 
troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center.
problem possible Solution
Poor pictureTry another channel.Adjust the antenna.Check all wire connections.
Poor sound quality.Try another channel.Adjust the antenna.
No picture or sound.Try another channel.Press the SOURCE button.Make sure the TV is plugged in.Check the antenna connections.
No sound or sound is too low atmaximum volume.First, check the volume of units connected to your TV (digital broadcasting receiver, DVD, cable broadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly.
Picture rolls vertically.Check all wire connections.
The TV operates erratically.Unplug the TV for 30 seconds, then try operating it again.
The TV won’t turn on.Make sure the wall outlet is working.
Remote control malfunctionsReplace the remote control batteries.Clean the upper edge of the remote control (transmission window).Check the battery terminals.
“Check signal cable” message.Ensure that the signal cable is firmly connected to the PC source.
“Not Supported Mode” message.Check the maximum resolution and the frequency of the Video Adapter.Compare these values with the data in the Display Modes.
Digital broadcasting screenproblem.Please check the digital signal strength and input antenna.
The image is too light or too dark.Adjust the Brightness and Contrast.Adjust the Fine tuning.
Black bars on the screen.Make sure the broadcast you’re receiving is High Definition (HD).HD channels sometimes broadcast Standard Definition (SD) programming, which can cause black bars.Set your cable/satellite box to stretch or widescreen mode to eliminate the bars.
Picture has a Red/Green or  Pink tint.Make sure the Component cables are connected to the correct jacks.
Closed Captioning not working.If you are using a Cable/Satellite box, you must set Closed Captioning on the box,  not your TV.
Snowy pictureYour cable box may need a firmware upgrade. Please contact your Cable company.
Ghosting on pictureThis is sometimes caused by compatibility issues with your cable box.Try connecting Component cables instead.
appendix

BN68-01178A-Eng.indd   812007-02-15   �� 8:59:08 
						

							
English - 
problempossible Solution
Horizontal bars appear to flicker,jitter or shimmer on the image.Adjust the Coarse tuning and then adjust the Fine tuning.
Vertical bars appear to flicker,jitter or shimmer on the image.Adjust the Coarse tuning and then adjust the Fine tuning.
Screen is black and powerindicator light blinks steadily.On your computer check: Power, Signal Cable.The TV is using its power management system.Move the computer's mouse or press any key on the keyboard.
Image is not stable and may appear to vibrate when you have a computer connected to the PC input.
If the setting is not correct, use your computer utility program to change the display settings.Your TV supports multiscan display functions within the following frequency domain:
Horizontal frequency (kHz)30~60
Vertical frequency (Hz)60~75
PC Maximum refresh rate(at 60 Hz)1920 X 1080
Image is not centered on the screen.Adjust the horizontal and vertical position.The screen position must be adjusted on the output source (i.e. STB) with a digital signal.
If a still image is displayed foran extended period of time, residual images or blurring may appear.
When you need to leave the monitor unused for an extended period of time, adjust the settings so that the monitor automatically goes into energy saving mode or activates the screen saver to display moving images..
The TFT LCD panel uses a panel consisting of sub pixels (3,147,264) which require sophisticated technology to produce. How-ever, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

BN68-01178A-Eng.indd   822007-02-15   �� 8:59:08 
						

							
English - 
Installing the Stand
<  ><  >
	1.	Place the TV face down on a soft cloth or cushion on a table.
2.	Put the stand into the hole at the bottom of the TV.
3.	Insert screw into the hole indicated and tighten.
disconnecting the Stand
<  ><  >< 4 >
	1.	Place the TV face down on a soft cloth or cushion on a table.
2.	Remove four screws from the back of the TV.
3.	Separate the stand from the TV.
4.	Cover the bottom hole with a cap.

BN68-01178A-Eng.indd   832007-02-15   �� 8:59:10 
						

							
English - 4
tras instalar el montaje en la pared, puede ajustar fácilmente la posición del televisor.
using the  remote Control Buttons
 For installation, refer to the Installation Manual provided.
 For product installation and the installation and moving of the wall mount, make sure to consult a specialized installation company.
 This installation manual is to be used when attaching the wall mount to a wall.  When attaching to other building materials, please contact your nearest dealer
Button operations
Wall-mount angle adjustmentTilt Up, Tilt Down, Move right,  Move left
ResetMoves to the initial installation position
Remembering the position and moving to the remembered position
Remembers 3 positions with the Red, Green and Yellow buttons. Moves to the remembered position using these 3 color buttons.
Wall-mount  adjustment (Sold separately)
Wall mount adjusment
position
adjust   Center ExitInfoposition           
Setup▲ more
Film Mode        : Off   ►
Wall-mount  adjustment   
►
PIP       ►
function help        : off   
►
SW upgrade       ►
tV
 move   Enter return
Setupplug & play       ►
language  : English   ►
t ime      ►
Game mode  :  off   ► 
V-Chip      ► Caption      ►
menu t ransparency  :  high ►▼more        
tV
 move   Enter return
Entering the menu
. Press the mEnu button to display the menu. 
  Press the ▲ or ▼ button to select “Setup”, then press the  EntEr button.
.
 Press the ▲ or ▼ buttons to select “Wall-Mount Adjustment”,  
  then press the  EntEr button. 
.
 Adjust to the desired position using the ▲,▼,◄,► buttons.
4. Press the  ExIt button to exit.
If you press an arrow button when no OSD is displayed on the TV screen,  the Adjustment screen appears.
When you turn the power off, your TV moves to the initial installation position. 
  When you turn the power on, your TV moves to the last  
  remembered position you adjusted.
tV rear panel auto Wall-mount
Ex-lInK Cable (not supplied)

BN68-01178A-Eng.indd   842007-02-15   �� 8:59:12 
						

							
English - 5
Wall mount Kit Specifications ( VESa )
When attaching to other building materials, please contact your nearest \
dealer.
product familyinch VESa Spec. (a  * B)Standard Screw (C * 
d)Quantity
lCd-tV
23~ 26200 * 100M4 * L104
32 ~ 40200 * 200M6 * L104
46 ~ 52600 * 400
M8 * L15457700 * 400
pdp-tV
42 ~ 50600 * 400
63No VESAM86
 We provided the standard dimensions for wall mount kits as shown in the table above. 
 When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
 Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set.
 Our 63” model does not comply with VESA Specifications. Therefore, you should use our dedicated wall mount kit   for this model.

BN68-01178A-Eng.indd   852007-02-15   �� 8:59:13 
						

							
English - 6
1.	Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2).
2.	Connect the Kensington lock cable.
3.	Fix the Kensington lock to a desk or a heavy stationary object.
using the anti-theft Kensington lock
The Kensington lock is a device used to physically fix the system when using it in a pub lic place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper \
use.
Figure 2
Figure 1
Cable

The place of the  Kensington Lock may be different depending on its model.

BN68-01178A-Eng.indd   862007-02-15   �� 8:59:13 
						

							
English - 
Specifications
model nameln-t406f ln-t466f
Screen Size (diagonal)
40 inches46 inches
power Consumption
245 W265 W
pC resolution
1920 x 1080 @ 60 Hz1920 x 1080 @ 60 Hz
Sound Output 10W X 2 10W X 2
dimensions (Wxdxh)
 Body With stand
  38.2 X 3.4 X 24.7 inches(971 x 87.2 x 628 mm)38.2 X 11.8 X 27 inches(971 x 300 x 687 mm)
  43.5 X 4.1 X 27.8 inches(1106 x 104.2 x 706 mm)43.5 X 12.8 X 30.2 inches(1106 x 326 x 768 mm mm)
Weight With Stand  Without stand
 46.52 lbs (21.1kg) 39.24 lbs (17.8 kg)
 65.26 lbs (29.6kg) 53.35 lbs (24.2kg)
Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity
  50 °F to 104 °F (10 °C to 40 °C) 10% to 80%, non-condensing -4 °F to 113 °F (-20 °C to 45 °C) 5% to 95%, non-condensing
  50 °F to 104 °F (10 °C to 40 °C) 10% to 80%, non-condensing -4 °F to 113 °F (-20 °C to 45 °C) 5% to 95%, non-condensing
model name ln-t4065fln-t4665f ln-t565f
Screen Size (diagonal)
40 inches46 inches52 inches
power Consumption
245 W265 W320 W
pC resolution
1920 x 1080 @ 60 Hz1920 x 1080 @ 60 Hz1920 x 1080 @ 60 Hz
Sound Output 10W X 2 10W X 2 10W X 2
dimensions (Wxdxh)
 Body With stand
  40.9 X 3.8 X 24.2 inches(1040.7 x 97 x 615.4 mm)40.9 X 11.4 X 26.4 inches(1040.7 x 290 x 671 mm)
  46.3 X 4.5 X 27.3 inches(1175.8 x 114 x 693.8 mm)46.3 X 12.6 X 30 inches(1175.8 x 320 x 761.4 mm)
  52.2 X 4.8 X 31 inches(1327 x 122 x 787.4 mm)52.2 X 12.6 X 33.6 inches(1327 x 320 x 854 mm)
Weight With Stand  Without stand
 47.62 lbs (21.6kg) 39.24 lbs (17.8kg)
 67.90 lbs (30.8kg) 56.21 lbs (25.5kg)
 81.79 lbs (37.1kg) 70.10 lbs (31.8kg)
Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity
  50 °F to 104 °F (10 °C to 40 °C) 10% to 80%, non-condensing -4 °F to 113 °F (-20 °C to 45 °C) 5% to 95%, non-condensing
  50 °F to 104 °F (10 °C to 40 °C) 10% to 80%, non-condensing -4 °F to 113 °F (-20 °C to 45 °C) 5% to 95%, non-condensing
  50 °F to 104 °F (10 °C to 40 °C) 10% to 80%, non-condensing -4 °F to 113 °F (-20 °C to 45 °C) 5% to 95%, non-condensing
Stand Swivel (left /  right)
-20˚ ~ 20˚
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply, refer to the label attached to the product.

BN68-01178A-Eng.indd   872007-02-15   �� 8:59:14 
						

							
This page is intentionally
left blank.

BN68-01178A-Eng.indd   882007-02-15   �� 8:59:14