Samsung LCD TV LN-T4061F LN-T4065F Specifications

							
English - 
Connecting a dVd player or Set-top/Cable Box
The rear panel jacks on your TV make it easy to connect a DVD player or Set-Top/Cable box to your TV.
1.	Connect a Component  
    Cable between the  
    COMPONENT IN(1 or 2)  
    [Y, PB, PR] jacks on the TV  
    and the COMPONENT  
    [Y, PB, PR]  jacks on the  
    DVD player or Set-Top/Cable   
    Box.
2.	Connect Audio Cables 
    between the COMPONENT 
    IN(1 or 2) [R-AUDIO-L]  
    jacks on the TV and the     
    AUDIO OUT jacks on the     
    DVD player or Set-Top/Cable   
    Box.
Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and  
  Pr (Red) for enhanced video quality. 
  Be sure to match the component video and audio connections.  
  For example, if connecting the video cable to COMPONENT IN, connect the audio cable   
  to COMPONENT IN also.
 Each DVD Player and Set-Top/Cable box has a different back panel configuration. When connecting a DVD player or Set-Top/Cable box, match the color of the connection  
  terminal to the cable.
dVd player or Set-t op/Cable Box tV rear panel
Component Cable (not supplied)
audio Cable (not supplied)
Connecting a Camcorder 
The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR
1.	Connect a Video Cable 
     between the AV IN2  
    [VIDEO] jack on the  
    TV and the VIDEO OUT  
    jack on the camcorder.
2.	Connect Audio Cables  
    between the AV IN2 
    [R-AUDIO-L]  jacks on the  
    TV and the AUDIO OUT  
    jacks on the camcorder.
Camcorder tV Side panelVideo Cable (not supplied)
audio Cable (not supplied)
Each Camcorder has a different back panel configuration. When connecting a Camcorder, match the color of the connection terminal to the cable.

BN68-01178A-Eng.indd   92007-02-15   �� 8:57:00 
						

							
English - 0
Connecting a dVd player or Set-top/Cable Box via hdmI
This connection can only be made if there is an HDMI Output connector on\
 the external device.
dVd player, Set-top/Cable Box rear panel
tV rear panel
hdmI Cable (not supplied)
What is HDMI? 
•  HDMI(High-Definition Multimedia Interface), is an interface that  
  enables the transmission of digital audio and video signals using a single cable  
•  The difference between HDMI and DVI is that the HDMI device is smaller in size and 
  has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed
 Each DVD player and or Set-Top/Cable box has a different back panel configuration. 
Connecting a dVd player or Set-t op/Cable Box via dVI
This connection can only be made if there is a DVI Output connector on t\
he external device.
Each DVD player and Set-Top/Cable Box has a different back panel configuration. When connecting a DVD player or Set-Top/Cable Box, match the color of the connection terminal   
  to the cable. When using an HDMI/DVI cable connection,you must use the HDMI IN1 jack.
tV rear panel
dVd player, Set-t op Box
audio Cable (not supplied)

dVI to hdmI Cable (not supplied)
1.	Connect an HDMI Cable  
    between the HDMI IN  
    (1,2 or 3) jack on the 
    TV and the HDMI jack 
    on the DVD player or Set-   
    Top/Cable Box.
1.	Connect a DVI to HDMI  
    Cable or DVI-HDMI Adapter  
    between the HDMI IN 1  
    jack on the TV and  
    the DVI jack on the  
    DVD player or Set-Top/Cable   
    Box.
 
2.	Connect Audio Cables  
    between the DVI IN (HDMI 1)  
    [R-AUDIO-L] jack on the  
    TV and the AUDIO OUT jacks  
    on the DVD player or  
    Set-Top/Cable Box.
Side panel Jacks
or

BN68-01178A-Eng.indd   102007-02-15   �� 8:57:01 
						

							
Connecting an Amplifier/DVD Home Theater
1.	Connect Audio Cables  
   
between the AUDIO OUT  
   
[R-AUDIO-L] on the TV  
   
and AUDIO IN [R-AUDIO- 
   
L] on the Amplifier/DVD  
   
Home Theater.
   
When an audio amplifier is 
 
   
connected to the "AUDIO  
   
OUT [L-AUDIO-R]"  
   
terminals: Decrease the  
   
volume of the TV, and adjust  
   
the volume level with the 
   
Amplifier’s volume control.
Amplifier/DVD Home Theater
TV Rear Panel
Audio Cable (Not supplied)
Each Amplifier/DVD Home Theater has a different back panel configuration. When connecting an Amplifier/DVD Home Theater, match the color of the connection  
 
terminal to the cable.
English - 11
Connecting a Digital Audio System
1.	Connect an Optical Cable 
   
between the “DIGITAL 
   
AUDIO OUT (OPTICAL)” 
   
jacks on the TV and the 
   
Digital Audio Input jacks on 
   
the Digital Audio System.
   
When a Digital Audio
 
   
System is connected to the 
   
“DIGITAL AUDIO OUT 
   
(OPTICAL)” terminal: 
   
Decrease the volume 
   
of the TV, and adjust the 
   
volume level with the 
   
system’s volume control.
Digital Audio SystemTV Rear Panel
Optical Cable (Not supplied)
 5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.  Each Digital Audio System has a different back panel configuration.
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
Connecting a PC
PC
TV Rear Panel
D-Sub Cable (Not supplied)1
PC Audio Cable (Not supplied)2
1.	Connect a D-Sub  
   
Cable between PC IN  
   
[PC] connector on  
   
the TV and the PC  
   
output connector on  
   
your computer. 
2.	Connect a PC Audio  
   
Cable between PC IN  
   
[AUDIO] jack on the  
   
TV and the Audio Out  
   
jack of the sound card  
   
on your computer.
Each PC has a different back panel configuration. When connecting a PC, match the color of the connection terminal to the cable. When using an HDMI/DVI cable connection,you must use the HDMI IN1 terminal.
1Streo/2RCA Cable (Not supplied)2
HDMI/DVI Cable (Not supplied)1
Using the D-Sub Cable
Using the HDMI/DVI Cable
TV Rear Panel
Using the D-Sub Cable
1.	 	
Connect a HDMI/DVI cable between the HDMI1/DVI IN jack on the TV and the PC output jack on your computer. 
2.	
	
Connect a 1Stereo/2RCA cable between the DVI IN [L-AUDIO-R] jack on the TV and the Audio Out jack of the sound card on your computer.
Using the HDMI/DVI CablePC

BN68-01178A-Eng.indd   112007-02-15   �� 10:31:43 
						

							
English - 
plug & play feature
When the TV is initially powered on, basic settings proceed automatically and subsequently:
1.	Press the poWEr button on the remote control. 
    The message “Menu language, Shop Mode, Channels and Time will be set.” is  
    displayed.
    Press the  EntEr
 button, then “Select the language of the OSD” menu  
    is automatically displayed.
2. Press the ▲ or ▼ buttons to select language, then press the  EntEr button. 
    The message “Select Home Mode when installing this TV at home.” is displayed.
3.	Press the ◄ or ► buttons to select “Shop” or “Home”, then  
    press the  EntEr button.  
    The message “Select the antennas to memorize.” is displayed.
   We recommend setting the TV to Home mode for the best picture in your   
       home environment.    Shop mode is only intended for use in retail environments.    If the unit is accidentally set to Shop mode and you want to return to Dynamic 
      (Home) mode, press any Volume button and then hold down the  mEnu button 
      for five seconds on the side panel of the TV.
4.	Press the ▲ or ▼ buttons to memorize the channels of the selected connection. 
    Press the  EntEr button to select “Start”.    If the antenna is connected to ANT 1(AIR), select “Air” and if it is connected to 
        ANT 2 (CABLE), select “Cable”.
   If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select the “Air + Cable”.
   In Cable mode, you can select the correct signal source among STD, HRC,   
        and IRC by pressing the ▲ or ▼ button, then press the  EntEr button. 
        Contact your local cable company to identify the type of cable system that   
        exists in your particular area.
5.	The TV will begin memorizing all of the available channels. 
    After all the available channels are stored, the Auto program menu reappears. 
    Press the  EntEr button when channel memorization is complete. 
    The message “Select the clock mode.” is displayed.
   To stop the search before it has finished, press the  EntEr button with stop   
       selected.
	6.	Press the  EntEr button. 
    Press the ▲ or ▼ buttons to select “Manual” or “Auto”, then Press the      EntEr button. 
    The message “Set to daylight savings time.” is displayed.
turning the tV on and off
Press the  poWEr button on the remote control.
You can also use the button on the front of the panel.
operation
Select home mode when installing this tV at home.
plug & play
plug & play
Clock Set
menu language : 
plug & play
English
Español
français
 move  Enter Skip
Shop
menu language, Shop mode, 
Channels and t ime will be set.
Start
Select the language of the oSd.
home
 move  Enter Skip
Select the antennas to memorize.
Startair plug & playCable
air+CableStartStart
 move  Enter Skip
Clock mode 
:
 move  Enter Skip
Select the clock mode.plug & play
manual
auto
5%
Stop
    Enter  Skip
auto program in progress.
air Channel 50
plug & play
auto program is incomplete.
6 Channels were memorized.
air : 6, 
Cable : 0.
   Enter  Skip
oK

BN68-01178A-Eng.indd   122007-02-15   �� 8:57:05 
						

							
English - 
7.	Press the ▲ or ▼ buttons to select “No” or “Yes”, then press the EntEr button. 
    The message “Select the time zone in which you live.” is displayed.
8.	Press the ▲ or ▼ buttons to highlight the time zone for your local area 
    Press the  EntEr button. If you have received a digital signal, the time will be set 
    automatically. 
    If not, see page 48 to set the clock.
9.	The message “Enjoy your watching.” is displayed. 
    When you have finished, press the  EntEr button.
Changing Channels
1.	Press the Ch or Ch button to change channels. 
   When you press the 
Ch or Ch 
button, the TV changes channels in 
 
      sequence.  
      You will see all the channels that the TV has memorized. (The TV must have   
      memorized at least three channels). You will not see channels that were either
 
      erased or not memorized. See page 16 to memorize channels.
If you want to reset this feature...
1.	 Press the  mEnu
 button to display the menu.     Press the ▲ or ▼ buttons to select "Setup", then press the  EntEr button.
2.   Press the  EntEr button again, to select "Plug & Play".
3.	  The message “Menu language, Shop Mode, Channels and Time will be set.” 
 
    is displayed.
using the Channel Buttons
1.	Press the  prE-Ch button. 
    The TV will switch to the last channel viewed.
   To quickly switch between two channels that are far apart, tune to one   
      channel, then use the number button to select the second channel. Then   
      use the  prE-Ch
 button to quickly alternate between them.
using the prE-Ch Button to select the previous Channel
daylight Savings t ime :
Set the daylight savings time.plug & play
no
y es
Select the time zone in which you live.  plug & playnewfoundland
atlantic
EasternCentral
mountain
pacific
alaska hawaii
Enjoy your watching.
oK
Setupplug & play       ►
language  : English   ►
t ime      ►
Game mode  :  off   ► 
V-Chip      ► Caption      ►
menu t ransparency  :  high   ►▼ more        
tV
 move   Enter return
menu language, Shop mode, 
Channels and t ime will be set.
Start
 move   Enter Exit
 move   Enter Exit

BN68-01178A-Eng.indd   132007-02-15   �� 8:57:07 
						

							
English - 4
adjusting the Volume
1.	Press the Vol or Vol buttons to decrease or increase the volume. 
using mute
At any time, you can cut off the sound using the  mutE button.
1.	Press mutE button and the sound cuts off.  
    The word "              " will appear in the lower-left corner of the screen.
2.	To turn mute off, press the  mutE button again, or simply press the     Vol or Vol buttons.
Viewing the display
1.	Press the  Info button on the remote control.
    The TV will display the channel, the type of sound, 
 
    and the status of certain picture and sound settings.
 Press the  Info button once more or wait approximately 10 seconds and the 
  display disappears automatically.
The display identifies the current channel and the status of certain audio-video se ttings.  
air 
mono
picture mode : dynamic
Sound mode : Custom
mtS : Stereo
05 : 54 pm

BN68-01178A-Eng.indd   142007-02-15   �� 8:57:08 
						

							
English - 5
Viewing the menus
1.	With the power on, press the mEnu button. 
    The main menu appears on the screen. The menu’ s left side has five icons: 
    Picture, Sound, Channel, Setup, Input.
2.	Use the ▲ or ▼ buttons to select one of the five icons.  
    Then press the  EntEr
 button to access the icon’s sub-menu.
3.	Press the ExIt button to exit.
 The on-screen menus disappear from the screen after about one minute.
InputSource list  : tV   ►
Edit name       ►
WiSElInK       ►
anynet+ (hdmI-CEC)
tV
 move    Enter Exit
memorizing the Channels
Your TV can memorize and store all of the available channels for both "off-air" (Air) and "Cable" channels. After the available channels are memorized, use the  Ch or Ch buttons to scan through the channels. This eliminates the need to change channels by entering the channels digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding or deleting channels (\
Channel Lists).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you \
must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
1.	Press the 
mEnu button to display the menu.  
    Press the ▲ or ▼ buttons to select "Channel", then press the  EntEr
 button.
2.	Press the EntEr button select “Antenna”. 
    Press the ▲ or ▼ buttons to select “Air” or “Cable”, then press the  EntEr button.
    Press the  ExIt
 button to exit.
antenna  : air  ►
auto program     ►
Clear Scrambled Channel ►
Channel list     ►
name     ►
fine t une     ►
Signal Strength     ►
lna  : on ►
Channel
move   Enter return
tV
Channel
move   Enter return
tVantenna  : air  
auto program     
Clear Scrambled Channel
Channel list     
name     
fine t une
     Signal Strength     
lna  : on
airCable

BN68-01178A-Eng.indd   152007-02-15   �� 8:57:10 
						

							
English - 6
Storing Channels in memory (automatic method)
1.	Press the mEnu button to display the menu. 
    Press the ▲ or ▼ buttons to select “Channel”, then press the  EntEr button. 
2.	Press the ▲ or ▼ buttons to select "Auto Program", then press the  Ent Er button.
3.	Press the ▲ or ▼ buttons to select the antenna connection, then press the      EntEr button.
   Air: “Air” antenna signal. / Cable: “Cable” antenna signal. /  
      Air+Cable: “Air” and “Cable” antenna signals.
4.	When selecting the Cable TV system : Press the  EntEr button to start the auto  
    program. By default, the cable TV system is set to “STD”. If you want to select   
    another type of cable system, press the ▲ or ▼  button to select 
 
    “STD”, “HRC” or “IRC”.
   STD, HRC and IRC identify various types of cable TV systems. Contact your   
      local cable company to identify the type of cable system that exists in your  
      particular area. At this point the signal source has been selected.
    Press the  EntEr
 button to start the auto program.     To stop the search before it has finished, press the  EntEr button with stop   
       selected.
5.	After all the available channels are stored, the “Auto Program” menu reappears. 
    Press the  ExIt button to exit.
move    Enter return
Select the antennas to memorize.
Channel
move   Enter return
tV
StartairCable
air+CableStartStart
auto program
Cable Channel 50  50%
Stop
   Enter return
auto program in progress.
move    Enter return
Selects a cable system.auto program
move   Enter return
tV
analog
StartStd
hrC IrC
digitalStd
hrC IrC
antenna  : air  ►
auto program     ►
Clear Scrambled Channel ►
Channel list     ►
name     ►
fine t une     ►
Signal Strength     ►
lna  : on ►
Channel
move   Enter return
tV
plug & play
   Enter return
auto program is complete.
6 Channels were memorized.
air : 6, 
Cable : 0.
oK

BN68-01178A-Eng.indd   162007-02-15   �� 8:57:12 
						

							
English - 
after the television has been set up properly, your remote control can operate in five 
different modes: tV, dVd, Cable, Set-t op Box, VCr. pressing the corresponding button 
on the remote control allows you to switch between these modes, and control  whichever piece of equipment you choose.
The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes.
Setting  up the remote to  operate your VCr
.     Turn off your VCR.   
.   Press the  VCr
 button on your TV’s remote control.
.   Press the  SEt
 button on your TV’s remote control.
4.    Using the number buttons on your remote control, enter three digits of the VCR code listed on page 19 of this manual for your brand of VCR. Make sure you enter three digits of the code, even if the first digit is a “0”.  (If more than one code is listed, try the first one.)
5.    Press the  poWEr button on the remote control. Your VCR should turn on if your remote is set up correctly.  If your VCR does not turn on after set up, repeat steps 2, 3, and 4, but try one of the other codes listed for your brand of VCR.  If no other codes are listed, try each VCR code, 000 through 080.
  Note on Using Remote Control Modes: VCR When your remote control is in “VCR” mode, the volume buttons still control your  TV’s volume.
Setting  up the remote to  operate your Cable Box
.     Turn off your cable box.
.   Press the  CaBlE
 button on your TV’s remote control.
.   Press the  SEt
 button on your TV’s remote control.
4.    Using the number buttons on your remote control, enter three digits of the cable box code listed on page 20 of this manual for your brand of cable box. Make sure you enter three digits of the code, even if the first digit is a “0”. (If there is more than one code listed, try the first one.)
5.    Press the  poWEr button on the remote control. Your cable box should turn on if your remote is set up correctly.  If your cable box does not turn on after set up, repeat steps 2, 3, and 4, but try one of the other codes listed for your brand of cable box. If no other codes are listed, try each code, 000 through 046.
 
Note on Using Remote Control Modes: Cable Box When your remote control is in “CABLE” mode, the volume buttons still control your  TV’s volume.
Setting up  your remote Control

BN68-01178A-Eng.indd   172007-02-15   �� 8:57:13 
						

							
English - 
Setting up the remote to  operate your  dVd
.     Turn off your DVD.
.   Press the  dVd
 button on your TV’s remote control.
.   Press the  SEt
 button on your TV’s remote control.
4.    Using the number buttons on your remote control, enter three digits of the DVD code listed on page 20~21 of this manual for your brand of DVD.  Make sure you enter three digits of the code, even if the first digit is a “0”. (If there is more than one code listed, try the first one.)
5.    Press the  poWEr button on the remote control.  Your DVD should turn on if your remote is set up correctly.  If your DVD does not turn on after set up, repeat steps 2, 3, and 4, but try one of the other codes listed for your brand of DVD. If no other codes are list-ed, try each code, 000 through 141.
 
Note on Using Remote Control Modes: DVD When your remote control is in “DVD” mode, the volume buttons still control your  TV’s volume.
Setting  up the remote to  operate your StB
 
.     Turn off your STB.
.   Press the  StB
  button on your TV’s remote control.
.   Press the  SEt
 button on your TV’s remote control.
4.    Using the number buttons on your remote control, enter three digits of the STB code listed on page 21 of this manual for your brand of STB.  Make sure you enter three digits of the code, even if the first digit is a “0”. (If there is more than one code listed, try the first one.)
5.    Press the  poWEr button on the remote control.  Your STB should turn on if your remote is set up correctly.  If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of STB.  (If no other codes are listed, try each code, 000 through 074.)
 
Note on Using Remote Control Modes: STB When your remote control is in “STB” mode, the volume buttons still control your  TV’s volume.

BN68-01178A-Eng.indd   182007-02-15   �� 8:57:13