Samsung Hl-s5088W, Hl-s5688w, Hl-s6188w, Hl-s7178w Dlp Tv Owners Instructions

							1
Press the MENU button. 
Press the 
œor √button to select
“Picture”, then press the ENTER 
button.
2
Press the …or †button to select
“Mode”, then press the ENTER 
button.
Press the 
…or †button again to
select “Mode”, then press the 
ENTER button.
3
Press the …or †button to select the
desired picture mode (Dynamic,
Standard, Movie, or Custom), then
press the ENTER button.     
4
Press the …or †button to select 
a particular option(Contrast,
Brightness, Sharpness, Color, or
Tint), then press the ENTER button.
Press the 
œor √button to decrease
or increase the value of a particular
item.
continued...
English - 61
Customizing the Picture Settings
You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”,
“Tint”, and “Color Tone” according to personal preference. 
•While adjusting a picture
option, you can also select
another option (Contrast,
Brightness, Sharpness,
Color, or Tint) by pressing
the 
…or †button.
NOTE
•In PC mode, only the
Contrast and Brightness
can be selected.
▲Contrast▼100
Mode
Picture
Enter
Picture
Mode
Size
Digital NR
DNIe
My Color Control
Film Mode16:9 
On
On
Off 
Return
Picture
Enter
Mode
Mode
Contrast100Brightness45Sharpness75Color55TintG50 R50Color Tone
Reset
ReturnDynamic
Cool1OK
Picture
Enter
Mode
Mode
Contrast80√Brightness40Sharpness50Color50TintG50 R50Color Tone
Reset
ReturnStandard
Cool1OK
Adjust
Picture
Enter
Mode
Mode
Contrast80Brightness50Sharpness50Color50TintG50 R50Color Tone
Reset
ReturnStandard
Cool1OK
Dynamic
Standard
Movie
Custom
BP68-00588H-01Eng(060~079)  5/16/06  11:40 AM  Page 61 
						

							Picture Control
English - 62
5
Press the ENTER button to return to “Mode”.
Press the 
…or †button to select “Color Tone”, then press the 
ENTER button.
6
Press the …or †button to select a particular item (Cool2, Cool1,
Normal, Warm1, or Warm2), then press the ENTER button.
7
To return the factory defaults, select “Reset” by pressing the …or †
button. Press the ENTER button.
Press the 
…or †button to select “OK” or “Cancel”, then press the
ENTER button.
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
NOTE
•The reset function must be set separately for each mode (Dynamic, Standard, Movie, or Custom).
•If you set “Reset” to “OK”, the previously adjusted settings will
be reset to the factory defaults.
Resetting the Picture Settings to the Factory Defaults
Picture
Enter
Mode
Mode
Contrast80Brightness40Sharpness50Color50TintG50 R50Color Tone
Reset
ReturnStandard
Cool1OK
Picture
Enter
Mode
Mode
Contrast80Brightness40Sharpness50Color50TintG50 R50Color Tone
Reset
ReturnStandard
Cool1OK
Picture
Enter
Mode
Mode
Contrast80Brightness45Sharpness75Color55TintG50 R50Color Tone
Reset
ReturnStandard
Cool1OK
Cool2
Cool1
Normal
Warm1
Warm2
BP68-00588H-01Eng(060~079)  5/16/06  11:40 AM  Page 62 
						

							English - 63
Changing the Picture Size
You can select the picture size which best corresponds to your viewing requirements.
1
Press the MENU button. 
Press the 
œor √button to select
“Picture”, then press the ENTER 
button.
Press the 
…or †button to select
“Size”, then press the ENTER button.
2
Press the …or †button to select the
screen format you want, then press
the ENTER button.
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
Alternate method
Press the P.SIZE button on the
remote control repeatedly to select
one of the picture size settings.
•“16:9”: Sets the picture to 
16:9 wide mode.
•“Zoom1”:  Magnifies the size 
of the picture on 
screen. 
•“Zoom2”: Magnifies the size of the picture more than “Zoom1”. 
•“Wide Fit”: Enlarges the aspect ratio of the picture to fit the 
entire screen.
•“4:3”: Sets the picture to 4:3 normal mode. 
NOTES
•You can select the 16:9, 4:3 and Wide Fit screen sizes in the DTV Component (720p, 1080i) or
HDMI (720p, 1080i) mode.
•When Double (     ,     ) mode has been set in PIP, the Picture Size cannot be set.
•For Zoom1, Zoom2, and Wide Fit (DTV’s HD signal only), you can adjust the vertical position using
the 
…or†button after pressing the P.SIZE button on the remote control.
•When watching a DTV’s HD signal, you can
use Wide Fit. 
Horizontal zoom(Wide Fit) sets the optical 
picture format by expanding it both 
horizontally and vertically. 
For example, you can reset the picture in 
4:3 format to 16:9.
Wide Fit does not support all external devices.
Picture
Enter
Picture
Mode
Size
Digital NR
DNIe
My Color Control
Film Mode4:3
On
Off
Off 
Return16:9
Zoom1
Zoom2
Wide Fit
4:3
Picture
Enter
Picture
Mode
Size
Digital NR
DNIe
My Color Control
Film Mode16:9
On
On
Off 
Return
Zoom1 Move▲
▼
Wide Fit4 : 3
BP68-00588H-01Eng(060~079)  5/16/06  11:40 AM  Page 63 
						

							Picture Control
English - 64
Digital Noise Reduction
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction 
feature to help reduce any static and ghosting that may appear on the screen.
1
Press the MENU button. 
Press the 
œor √button to select
“Picture”, then press the ENTER 
button.
2
Press the …or †button to select
“Digital NR”, then press the ENTER
button.
3
Press the …or †button to select
“Off” or “On”, then press the ENTER
button.
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
Picture
Enter
Picture
Mode
Size
Digital NR
DNIe
My Color Control
Film Mode16:9
On
On
Off
Return
Picture
Enter
Picture
Mode
Size
Digital NR
DNIe
My Color Control
Film Mode16:9
On
Off
Off 
Return
Off
On
Picture
Enter
Picture
Mode
Size
Digital NR
DNIe
My Color Control
Film Mode16:9 
On
On
Off 
Return
BP68-00588H-00Eng(060~079)  4/25/06  3:36 PM  Page 64 
						

							English - 65
DNIe (Digital Natural Image engine)
This TV includes the DNIe function so as to provide a high visual quality.
If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to
Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration
purposes. Using this function, you can view the difference in the visual quality.
1
Press the MENU button.
Press the 
œor √button to select
“Picture”, then press the ENTER 
button.
2
Press the …or †button to select
“DNIe”, then press the ENTER
button.
3
Press the …or †button to select
“Off”, “Demo”, or “On”, then press
the ENTER button.
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
NOTE
•DNIeTM(Digital Natural Image engine)
This feature brings you a more detailed image with 3D noise
reduction and detail, contrast and white enhancement.
•This function doesn’t work when the Input Source is PC.
•The DNle function is not supported in the Movie mode.
(It is inactivated.)
Picture
Enter
Picture
Mode
Size
Digital NR
DNIe
My Color Control
Film Mode16:9
On
On
Off 
Return
Picture
Enter
Picture
Mode
Size
Digital NR
DNIe
My Color Control
Film Mode16:9
On
Off
Off 
Return
Off
Demo
On
Picture
Enter
Picture
Mode
Size
Digital NR
DNIe
My Color Control
Film Mode16:9 
On
On
Off 
Return
•Off : Switches off the DNIe mode.
•Demo : The screen before 
applying DNIe appears
on the left and the screen 
after applying DNIe 
appears on the right.
•On : Switches on the DNIe mode.
BP68-00588H-00Eng(060~079)  4/25/06  3:36 PM  Page 65 
						

							Picture Control
English - 66
Setting the My Color Control Mode
My Color Control allows you to adjust colors according to your preference, by adjusting skin, sky,
and grass tones using the predefined settings (Red, Green, Blue, Yellow, Pink, Standard, and Custom)
without affecting other colors on the screen. 
Using the My Color Control Function in the Easy Control Menu
Skin, sky and grass tones are easily adjustable to suit your preferences.
1
Press the MENU button. 
Press the 
œor √button to select
“Picture”, then press the ENTER 
button.
2
Press the …or †button to select
“My Color Control”, then press the
ENTER button.
3
Press the …or †button to select
“Easy Control”, then press the
ENTER button.
4
Press the œor √button to
select from the various
picture settings.
The original picture (before 
adjustment) is shown on the
left side, while the selected
mode is shown on the right
side.
•There are seven My 
Color Control modes: 
Red, Green, Blue, 
Yellow, Pink, Standard, 
and Custom.
Select “Return” by pressing
the 
…or † button, then
press the ENTER button to
return to the previous menu.
Press the EXIT button to exit.
NOTES
•Changing the settings 
in the “Detail Control”
menu (see page 67) 
will automatically set 
the My Color Control
mode to “Custom”.
•Pressing the ENTER button
on the remote control for
3 seconds when there is
no OSD on the screen 
will display the My Color
Control menu.
Picture
Enter
Picture
Mode
Size
Digital NR
DNIe
My Color Control
√Film Mode
16:9 
On
On
Off 
Return
Picture
Enter
My Color Control
Easy Control√Detail Control
Return
Easy Control
ReturnEnterMove
OriginalCustom
Red Green Blue Yellow Pink StandardCustom
Easy Control
ReturnEnterMove
OriginalRed
RedGreen Blue Yellow Pink Standard Custom
Picture
Enter
Picture
Mode
Size
Digital NR
DNIe
My Color Control
Film Mode16:9 
On
On
Off 
Return
BP68-00588H-00Eng(060~079)  4/25/06  3:36 PM  Page 66 
						

							English - 67
My Color Control Custom Settings
Users can adjust the 5 My Color Control colors (Red, Green, Blue, Yellow, and Pink).
1
Press the MENU button.  
Press the 
œor √button to select
“Picture”, then press  the ENTER 
button.
2
Press the …or †button to select
“My Color Control”, then press the
ENTER button.
3
Press the …or †button to select
“Detail Control”, then press the
ENTER button.
4
Press the …or †button to select the
desired color and then press the
ENTER or 
√button.
5
Press the œor √button to
adjust the settings. 
Press the 
…or †button to
choose other colors.
6
Press the ENTER or MENU
button to confirm the
changes and return to the
previous menu.
Resetting the My Color Control Colors to the Factory Defaults
You can return to the factory default settings for My Color Control colors.
7
Press the …or †button to select
“Reset”, then press the ENTER 
button.
The previously adjusted My Color
Control colors will be reset to the 
factory defaults.
Select Return by pressing the 
…or †
button then press the ENTER button
to return to previous menu.
Press the EXIT button to exit. •The original picture (before
adjustment) is shown on the left
side, while the picture after
adjustment is shown on the right
side, and an adjustment bar is
shown on the bottom of the
screen.
Picture
Enter
Picture
Mode
Size
Digital NR
DNIe
My Color Control
√Film Mode
16:9 
On
On
Off 
Return
Picture
Enter
My Color Control
Easy Control
Detail Control√
Return
Picture
EnterAdjust
Detail Control
Red50√Green50Blue50Yellow50Pink50Reset
Return
Picture
Enter
Detail Control
Red 50
Green 50
Blue 50
Yellow 50
Pink 50
ResetReturn
Detail Control
ReturnEnterAdjust
OriginalAdjusted
▲Red▼50
BP68-00588H-00Eng(060~079)  4/25/06  3:36 PM  Page 67 
						

							Picture Control
English - 68
Using the Color Weakness Enhancement Feature
This feature adjusts the Red, Green or Blue color to compensate for the user’s particular color weakness.
1
Press the MENU button. 
Press the 
œor √button to select
“Setup”, then press the ENTER 
button.
2
Press the …or †button to select
“Color Weakness”, then press the
ENTER button.
3
Press the …or †button to select
“Color Weakness”, then press the
ENTER button.
Press the 
…or †button to select
“On”, then press the ENTER button.
4
Press the …or †button to select a
color to be adjusted, then press the
ENTER button.
Press the 
œor √button to adjust the
value of a color selected.
Select “Return” by pressing the 
…or † button, then press the
ENTER button to return to the previous menu.
Press the EXIT button to exit. •You can also select these
options (Red, Green or
Blue) by pressing the 
…
or †button.
Setup
Enter
Color WeaknessReturn
Color WeaknessOff
Red
0Green0Blue0
Off
On
Setup
Enter
Color WeaknessReturnColor Weakness Off
Red0√Green0Blue0
On
Adjust
▲Red▼0
Setup
Enter
Setup
Language
Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
†Color Weakness
English
Off
Medium
OffReturn
Setup
Enter
Setup
Language
Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
†Color Weakness√
English
Off
Medium
OffReturn
Color Weakness
BP68-00588H-00Eng(060~079)  4/25/06  3:36 PM  Page 68 
						

							English - 69
Setting the Film Mode
You can automatically sense and process film signals and adjust the picture for optimum quality.
1
Press the MENU button.  
Press the 
œor √button to select
“Picture”, then press  the ENTER 
button.
2
Press the …or †button to select
“Film Mode”, then press the ENTER
button.
3
Press the …or †button to select
“Off” or “On”, then press the ENTER
button.
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
NOTE
•The Film Mode can only be set when viewing an analog signal in
AV modes (AV, S-Video or Component) that support SD (Standard
Definition) signals (480i).
Picture
Enter
Picture
Mode
Size
Digital NR
DNIe
My Color Control
Film Mode16:9 
On
On
Off
Return
Picture
Enter
Picture
Mode
Size
Digital NR
DNIe
My Color Control
Film Mode16:9 
On
Off
Off
Return
Off
On
Picture
Enter
Picture
Mode
Size
Digital NR
DNIe
My Color Control
Film Mode16:9 
On
On
Off 
Return
BP68-00588H-00Eng(060~079)  4/25/06  3:36 PM  Page 69 
						

							Picture Control
English - 70
Viewing Picture-In-Picture
One of the best features of your TV is the Picture-In-Picture (PIP) feature. The advanced PIP system
allows you to watch two different pictures at once, even if you don’t have a VCR or DVD connected
to your TV.
Activating the PIP
1
Press the MENU button.
Press the 
œor √button to select
“PIP”, then press the ENTER button.
2
Press the …or †button to select
“PIP”, then press the ENTER button.
3
Press the …or †button to select
“On”, then press the ENTER button.
The sub (PIP) picture appears in the
corner of the screen.
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
Alternate method
Press the PIP button on the remote control repeatedly to activate or
deactivate the PIP.
NOTES
•This feature doesn’t function when the “V-Chip” is active.
•If you turn the TV off while watching and turn it on again, then the mode will return to normal
video.
•Digital channels can be viewed in PIP when the main picture is from an external input such as a
DVD, VCR or STB.
•PIP is supported even when both the main and the sub pictures are analog.
For more information, refer to the PIP Settings table on page 71.
•When in the TV Guide On Screen
TMmode, toggles the state between locked and unlocked in the
Video Window. (For further explanation, see the TV Guide user’s manual.)
PIP
Enter
PIP
PIP
Swap
Size
Position
Air/Cable
ChannelOff
Cable 
Cable 3Return
PIP
Enter
PIP
PIP
Swap
Size
Position
Air/Cable
ChannelOff
Cable 
Cable 3Return
PIP
Enter
PIP
PIP
Swap
Size
Position
Air/Cable
ChannelOff
Cable 
Cable 3ReturnOff
On
BP68-00588H-00Eng(060~079)  4/25/06  3:36 PM  Page 70