Samsung Hl-s5088W, Hl-s5688w, Hl-s6188w, Hl-s7178w Dlp Tv Owners Instructions

							English - 11
List of Features
Your TV is designed and engineered using the latest technology. It is a full-featured, high-performance
unit that exceeds industry standards. In addition, it has these special features:
• Easy-to-operate remote control
• Dynamic, easy to navigate menus
• Easy-to-use on-screen menu system you can access from the front/right side panel, or remote control
• Automatic timer to turn the TV on and off at any time you choose
• Adjustable picture and sound settings and the ability to memorize your favorite settings
• Automatic channel tuning for up to 181 channels
• A special filter to reduce or eliminate reception problems
• Fine tuning control for the sharpest picture possible
• A built-in multi-channel sound decoder for stereo and bilingual listening
• Built-in, dual channel speakers
• A special sleep timer
• Picture-in-Picture capability that lets you watch two channels at once
• Widescreen TV with adjustable image size
• Life-like clear images provided by DNle technology
• My Color Control mode to correspond with your color preference
• Color Weakness Enhancement Feature
• Digital Input jack
• Digital Audio Output (OPTICAL) jack
• CableCARD slot
• D-Net (IEEE1394)
• TV Guide On Screen™
• Game mode
• Easy-to-use channel manager menu.
• WISELINK enables you to view and play photo (JPEG) and audio files (MP3) through the TV’s 
WISELINK jack.
Accessories
Once you have unpacked your TV, check to make sure that you have all the parts shown here. 
If any piece is missing or broken, call your dealer. 
Cloth-CleanWarranty Card/
Registration Card/
Safety Guide Manual/
Quick Guide Manual/Remote Control
(BP59-00115A)/
AAA BatteriesOwner’s InstructionsPower Cord 
(3903-000144)G-LINKTMCable
(MD96-00036A)
BP68-00588H-01Eng(002~017)  5/16/06  3:04 PM  Page 11 
						

							Your New Wide TV
English - 12
Front Panel LED Indicators 
The three lights on the front panel indicate the status of your TV. 
The product color and shape may vary depending on the model.
Indicator Light Key
: Light is On
: Light is Blinking
: Light is Off
•  It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.
•  The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it working.
TIMER
Standby state.
The picture will automatically appear in about 15 seconds.
Auto Timer ON/OFF has been set and the set will automatically be
turned on in about 15 seconds.
A cooling fan inside the set is not operating normally.
Lamp cover on the rear of the set is not properly shut. 
Check if the ventilation hole on the rear of the set is blocked, because
if the inner temperature is too high, the power will shut off. 
Lamp may be defective. Please contact a certified technician.
LAMPSTAND BY/TEMP Indication
HL-S5088W/HL-S5688W/HL-S6188W
Remote Control Sensor  
Aim the remote control towards this spot on the TV.
POWER
Press to turn the TV on and off.
Indicator Lights
HL-S7178W
Remote Control Sensor  
Aim the remote control towards this spot on the TV.
POWER
Press to turn the TV on and off.
BP68-00588H-01Eng(002~017)  5/16/06  3:04 PM  Page 12 
						

							English - 13
Press to switch between viewing TV programs and signals from connected components.
Press to see the on-screen menu.
Press to raise or lower the volume and to select items when using the on-screen menu.
Press to change channels and move between items on the on-screen menu.
Press to activate (or change) a particular item.
Side Panel Jacks
Use the right side panel jacks to connect a component that is used only occasionally (a camcorder or
video game, for example). The product color and shape may vary depending on the model.
Connect the video signal from a camcorder or video game.
Connect the audio signal from a camcorder or video game.
You can connect a USB mass storage device to view photo files (JPEG) and
play audio files (MP3).
HL-S7178W
ŒPress to switch between viewing TV
programs and signals from connected components.
´Press to see the on-screen menu.
ˇPress to raise or lower the volume and
to select items when using the on-screen menu.
¨Press to change channels and move between items on the
on-screen menu.
ˆPress to activate (or change) a particular item.
Front/Right Side Buttons
The buttons on the front/right side panel control your TV’s basic features, including the on-screen menu
system. To use the more advanced features, you must use the remote control.
The product color and shape may vary depending on the model.
HL-S5088W/HL-S5688W/HL-S6188W
BP68-00588H-01Eng(002~017)  5/16/06  3:04 PM  Page 13 
						

							Your New Wide TV
English - 14
Rear Panel Jacks
ŒCableCARDTM
Insert a CableCARD into the slot. (Refer to page 22)
´S-VIDEO INPUT jacksConnects an S-Video signal from an S-VHS VCR or DVD player. 
(Refer to page 21)
ˇVIDEO/AUDIO INPUT jacks Connect video/audio signals from external sources, such as VCR
or DVD players. (Refer to pages 21 and 25)
¨VIDEO/AUDIO OUTPUT jacks  Sends video/audio signals from the TV to an external source,
such as a VCR. These jacks are available only in TV, Video and 
S-Video modes. (Refer to pages 21 and 27)
ˆCOMPONENT IN 1, 2 jacks (Y, PB, PR,AUDIO L/R)  Use these jacks to connect the component video/audio signals
from a DVD player or a Set-Top Box. (Refer to pages 24 and 26)
ØPC VIDEO INPUT jack
Connect to the video output jack on your PC.
∏PC AUDIO INPUT jackConnect to the audio output jack on your PC.
(Refer to page 132)
”HDMI (High Definition Multimedia Interface)
INPUT jacks (HDMI IN 2)
Connect to the HDMI jack of a device with HDMI output. 
’HDMI (High Definition Multimedia Interface)/ 
DVI INPUT jack (HDMI 1/DVI IN)
Connect to the HDMI jack of a device with HDMI output. 
These inputs can also be used as a DVI connection with separate
analog audio inputs. An optional HDMI/DVI cable will be 
necessary to make this connection. When using an optional
HDMI/DVI adapter, the DVI analog audio inputs on your TV allow
you to receive left and right audio from your DVI device.
(Not compatible with PC) (Refer to pages 24 and 27)
˝DVI AUDIO (L/R) INConnect to the DVI audio output jack of an external device.
(Refer to page 26)
ÔDIGITAL AUDIO OUT (OPTICAL) jackConnect to a Digital Audio Component. (Refer to page 28)
G-LINKTM
Connect the IR controller cable to the G-LINKTMterminal on your TV.
ÒRS232CConnection for professional linking network and service usage.
ÚD-Net (IEEE1394) S400 MPEGConnect to external IEEE1394 digital products such as digital
VCRs and camcorders. Two jacks are provided for this purpose, 
which allow for a high degree of flexibility for connecting your
D-Net controlled system. (Refer to pages 116~130)
ÆANTENNA terminalsTwo independent cables or antennas can be connected to 
these terminals. Use “ANT 1 IN (CABLE)” and “ANT 2 IN (AIR)”
terminals to receive a signal from VHF/UHF antennas or your
cable system. (Refer to pages 18~20)
ıPOWER INConnect the supplied power cord.
BP68-00588H-01Eng(002~017)  5/16/06  11:34 AM  Page 14 
						

							English - 15
Remote Control
You can use the remote control up to about 23 feet from the TV.
When using the remote control, always point it directly at the TV.
You can also use your remote control to operate your VCR, Cable
box, DVD player and Set-top box. See pages 38~44 for details. 
1. POWERTurns the TV on and off.
2. Channel Number Press to directly tune to a particular channel.
3.-Press to select additional channels (digital
and analog) being broadcast by the same
station. For example, to select channel 
“54-3”, press “54”, then press “
-” and “3”.
4. ANTENNAPress to select “AIR” or “CABLE”.
5. CH MGRIt display “Channel Manager” on the screen.
6. VCR/DVD ControlsControls VCR or DVD functions: Rewind, Stop,
Play/Pause, Fast Forward.
7. VOL +, VOL -Press to increase or decrease the volume.
8. MUTEPress to mute the TV sound.
9. MENUDisplays the main on-screen menu.
10. ▲, ▼, œ, √, ENTERPress to move highlight up, down, left, or
right. While using the on-screen menus,
press ENTER to activate (or change) a 
particular item.
11. INFOPress to display information on the TV
screen.
12. TV GUIDEPress to display the TV Guide On ScreenTM
lnteractive Program Guide (IPG). 
(Refer to the TV Guide On ScreenTMmanual
and TV Guide On ScreenTMQuick Setup Sheet
for further information on G-LINKTM.)
13. P.MODEAdjust the TV picture by selecting one of 
the preset factory settings (or select your
personal, customized picture settings.)
(Refer to page 60)
14. S.MODESelect Sound effect. (Refer to page 81)
15. MTS (Multichannel Television
Stereo)
Press to choose Stereo, Mono or SAP
(Secondary Audio Program).
16. SRSActivates TruSurround. (Refer to page 82)
17. CAPTIONControls the caption decoder.
18. SLEEPPress to select a preset time interval for
automatic shut off. (Refer to page 48)
19. Mode
(TV/DVD/STB/CABLE/VCR)
Selects a target device to be controlled by
the Samsung remote control (i.e., TV, DVD,
STB, CABLE, or VCR).
20. SOURCEPress to display all of the available video
sources (TV, AV1, AV2, AV3, S-Video1,
S-Video2, Component1, Component2, PC,
HDMI1, and HDMI2).
21. PRE-CHTunes to the previous channel.
22. WISELINKThis function enables you to view and play
photo (JPEG) and audio files (MP3) from
an external device. (Refer to page 143)
23. RECUse to record in TV Guide menu.
(Refer to the TV Guide On ScreenTMmanual
and TV Guide On ScreenTMQuick Setup Sheet
for further information on G-LINKTM.)
24.œœ/Day-, Day+/√√Moves forward or backwards in 24 hour
increments in the Listings Grid in the TV
Guide on screen
TM.
25. CH /Press to change channels. Moves from one
set of screen information to the next in the
TV Guide On Screen
TM.
26. EXITPress to exit the menu.
27. D-NETRuns the D-Net view function. 
(Refer to pages 116~130)
28. STILLPress to pause the current screen. 
(Refer to page 76)
29. P.SIZEPress to change the screen size. 
(Refer to page 63)
30. PIP (Picture In Picture)Displays the available channels in sequence.
(These buttons change channels in the PIP
window only.) 
When in the TV Guide On Screen
TMmode,
toggles the state between locked and
unlocked in the Video Window.
(For further explanation, see the TV Guide
user’s manual.)
31. PIP ControlsCH /: Press to display the available
channels in sequence. (These buttons change
channels in the PIP window only.)
(Refer to page 75)
32. FAV.CH (Favorite Channel)Press to switch between your favorite 
channels.
33. RESETIf your remote control is not functioning
properly, take out the batteries and press
the reset button for about 2~3 seconds. 
Re-insert the batteries and try using the
remote control again. 
34. SETUsed during set up of this remote control, 
so that it will work compatibly with other
devices (Set-top box, VCR, Cable box,
DVD, etc.)
NOTES
•The Color buttons are used 
for the channel list function.
(Refer to pages 52~55)
•This is a special remote control
for the visually impaired, and
has Braille points on the
POWER, VOL +, VOL
-,
CH  / , STOP, and
PLAY/PAUSE buttons.
•If you are using a cable box,
the TV Guide On Screen
TM
system needs to be able to
change channels on your cable
box to download program
listings when the TV is not in
use. Please connect the supplied
G-LINK
TMcable to the G-LINKTM
jack of the TV. After you connect
the G-LINKTMcable you will be
able to control your cable box
using the TV’s remote. 
(Refer to the TV Guide On
Screen
TMQuick Setup Sheet for
further information on G-LINKTM.)
BP68-00588H-01Eng(002~017)  5/16/06  11:34 AM  Page 15 
						

							Your New Wide TV
English - 16
Installing Batteries in the Remote Control
With normal use, the batteries in the remote control should last about a year. If you notice a performance
degradation while using the remote, the batteries may need to be replaced. Make sure you replace both
batteries and do not mix old and new batteries in the remote control. If you won’t be using the remote
control for a long time, remove the batteries and store them in a cool, dry place.
1
Lift the cover at the back of the remote control
upward as shown in the figure.
2
Install two AAA size batteries. Make sure to 
match the “+” and “–” ends of the batteries 
with the diagram inside the compartment.
3
Close the cover as shown in the figure.
NOTE
•Do not mix battery types, i.e, alkaline and manganese.
BP68-00588H-00Eng(002~017)  4/25/06  3:32 PM  Page 16 
						

							Connections
BP68-00588H-00Eng(002~017)  4/25/06  3:32 PM  Page 17 
						

							Connections
English - 18
Connecting VHF and UHF Antennas
If you do not have a cable system, you will need to connect an antenna to your TV.  
Antennas with 75-ohm Round Leads
If your antenna looks like this: it has 75-ohm round leads.
1
Plug the antenna lead into
the ANT 2 IN (AIR) on the 
rear panel of your TV.
BP68-00588H-00Eng(018~031)  4/27/06  7:52 PM  Page 18 
						

							English - 19
Connecting Cable TV
You can connect different cable systems to your TV, including cable without a Cable box, 
and cable with a Cable box that descrambles some or all channels.
Cable without a Cable Box
1
Plug the incoming cable into
the ANT 1 IN (CABLE) on the
rear panel of your TV.
Cable with a Cable Box that Descrambles All Channels
1
Find the cable connected to
the ANTENNA OUT 
terminal on your Cable box. 
This terminal might be 
labeled “ANT OUT”, “VHF 
OUT” or simply “OUT”.
2
Connect the other end of the
cable to the “ANT 1 IN
(CABLE)” terminal on the rear
panel of your TV.
BP68-00588H-00Eng(018~031)  4/27/06  7:52 PM  Page 19 
						

							Connections
English - 20
Cable with a Cable Box that Descrambles Some (But Not All) Channels
To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial
cables (which you can buy from your Samsung dealer or any electronics store).
1
Find and disconnect the
cable that is connected to 
the ANTENNA IN terminal 
of your Splitter. 
This terminal might be 
labeled “ANT IN”, “VHF IN”
or simply, “IN”. Connect this 
cable to a two-way splitter.
2
Connect a coaxial cable
between an OUT terminal 
of the splitter and the IN 
terminal of the Cable box.
3
Connect a coaxial cable
between the ANTENNA OUT
terminal of the Cable box
and the B-IN terminal of the
RF (A/B) switch.
4
Connect another cable
between the other OUT 
terminal on the splitter and 
the A–IN terminal on the 
RF (A/B) switch.
5
Connect the last coaxial
cable between the OUT 
terminal of the RF (A/B) 
switch and the ANT 1 IN
(CABLE) on the TV.
After you’ve made this connection, set the A/B switch to the “A” position for normal viewing. 
Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch 
to “B”, you will need to tune your Set-Top Box to the Cable boxs output channel, which is usually
channel 3 or 4.)
BP68-00588H-00Eng(018~031)  4/27/06  7:52 PM  Page 20