Samsung Hl-s5088W, Hl-s5688w, Hl-s6188w, Hl-s7178w Dlp Tv Owners Instructions

							Operation
BP68-00588H-00Eng(018~031)  4/27/06  7:52 PM  Page 31 
						

							Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the (Power) button on the front panel.
Dynamic Menus and On-Screen Displays
The on-screen menu system allows you to control the settings of your TV. Access the on-screen menu 
system by pressing the MENU button on the remote control. Once the on-screen menu appears, use the
…/†/œ/√/ENTER  buttons on your remote control to select menu items and make adjustments\
. You can also
view the on-screen menu system and make some adjustments using the TV’\
s front/right side panel buttons.
English - 32
Operation
Viewing the Menus
1
Press the MENU button. The main menu will appear
at the bottom of the screen.
There are nine menu groups:
“Input”, “Picture”, “Sound”,
“Channel”, “Setup”, “PIP”,
“Listings”, “Application”, 
and “Menu Map”.
2
Press the œor √button, then press
the ENTER button to select an item
you want in the menu.
Press the 
…/†/œ/√/ENTER button
to display, change, or use the 
selected items.
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
Viewing the Display
Press the INFO button on the
remote control. 
The TV displays the current 
channel, the status of certain 
picture, sound settings and 
the current time.
The information displayed varies
according to the selected source.
Picture
Enter
Picture
Mode√Size
Digital NR
DNle
My Color Control
Film Mode16:9 
On
On
Off 
Return
Enter
Selects the input options.
No Time InformationCable
3
BP68-00588H-01Eng(032~059)  5/16/06  11:37 AM  Page 32 
						

							English - 33
Navigating Menus by Using the Menu Map
Using the Menu Map of the main menu enables you to view all menus and select a function quickly. 
You can select any menu by using the menu map.
1
Press the MENU button.
The main menu will appear at the bottom of the screen.
2
Press the œor √button to select “Menu Map”, then press the
ENTER button. The menu map will appear.
3
Press the …or †button to select a menu, then press the
ENTER button. The selected menu will appear.
4
Press the …/†/œ/√/ENTER buttons to display, change, or
use the selected items.
Press the EXIT button to exit. •Red button: Displays menus in alphabetical order.
•Green button: Moves to the previous page.
•Yellow button: Moves to the next page.
•Blue button: Exit from the menu.
•ENTER button: Moves to the selected menu.
BP68-00588H-00Eng(032~059)  4/25/06  3:34 PM  Page 33 
						

							English - 34
Operation
Selecting a Menu Language
When you start using your television for the first time, you must select the language which will
be used for displaying menus and indications.
1
Press the MENU button.
Press the 
œor √button to select
“Setup”, then press the ENTER 
button.
2
Press the …or †button to select
“Language”, then press the ENTER
button.
3
Press the …or †button to select
“English”, “Español” or “Français”,
then press the ENTER button. 
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
Setup
Enter
Setup
Language
Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
†Color Weakness
English
Off
Medium
OffReturn
Setup
Enter
Setup
Language
Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
†Color Weakness
English
Off
Medium
OffReturn
Setup
Enter
Setup
Language
Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
†Color Weakness
Medium
Off
English
Español
FrançaisReturn
BP68-00588H-00Eng(032~059)  4/25/06  3:34 PM  Page 34 
						

							English - 35
Memorizing Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable
channels. After the available channels are memorized, use the CH  and CH  buttons to scan
through the channels. This eliminates the need to change channels by entering the channel digits.
There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels
(automatic) and adding and deleting channels (channel manager).
1
Press the MENU button.
Press the 
œor √button to select
“Channel”, then press the ENTER 
button.
2
Press the …or †button to select
“Antenna”, then press the ENTER 
button.
Press the 
…or †button to select
“Air” or “Cable”, then press the
ENTER button.
3
Press the …or †button to select
“Auto Program”, then press the
ENTER button.
continued...
Selecting the Video Signal Source
Before your television can begin memorizing the available channels,
you must specify the type of signal source that is connected to the TV
(i.e., an air or cable system).
Channel
Enter
Channel
Antenna
Auto Program
Channel Manager
Fine Tune
Signal Strength
LNACable
OffReturn
Channel
Enter
Channel
Antenna
Auto Program
Channel Manager
Fine Tune
Signal Strength
LNA
On
Return
Channel
Enter
Channel
Antenna
Auto Program√Channel Manager
Fine Tune
Signal Strength
LNA
Air
OnReturn
Air
Cable
BP68-00588H-00Eng(032~059)  4/25/06  3:34 PM  Page 35 
						

							Operation
English - 36
4
Press the œor √button to select the Antenna connection,
then press the ENTER button.
When selecting Cable TV system:
Press the ENTER button to start the auto program. 
By default, the cable TV system is set to “STD”.
If you want to select another type of cable system, press the
œor √button to select Analog or Digital “STD”, “HRC” or
“IRC”.
5
Press the ENTER button to start the auto program. 
The TV begins memorizing all available stations. 
Press the ENTER button at any time to interrupt the 
memorization process.
Select “Return” by pressing the 
…or † button, then press 
the ENTER button to return to the previous menu.
Press the EXIT button to exit. •Air : “Air” antenna signal
Cable : “Cable” antenna signal
Air+Cable : “Air” and “Cable” antenna signals
•If a CableCARD is inserted into the “CableCARD” slot on
the rear panel, “Cable” and “Air+Cable” are not available.
•STD, HRC and IRC identify various types of cable TV
systems. Contact your local cable company to identify the
type of cable system that exists in your particular area.
At this point the signal source has been selected.
•The TV must be connected to an air/cable in order to
receive digital TV signals. Even if a particular channel
is deleted from the memory, you can always tune to that
channel directly by using the number buttons on the
remote control.
•When connecting Digital Cable to a Set-Top Box,
Channel Memorization is done on the STB. 
To view the STB on your TV, select the Input jack the 
STB is connected to with the SOURCE button on the 
TV’s remote. (see page 49)
NOTES
•All available DTV and analog channels are automatically stored in memory.
•When a Cable card is inserted, you do not need to save channels.
Auto Program
Select the antennas to Memorize
AirCableAir+Cable
Auto Program
Select the cable system.
AnalogSTDHRCIRC
Digital
STDHRCIRC
MoveEnterReturn
MoveEnterReturn
Auto Program
Select the cable system.
AnalogSTDHRCIRC
Digital
STDHRCIRC
MoveEnterReturn
Auto ProgramAuto Program in progress.
Cable   3
85%
Stop
EnterReturn
Auto ProgramAuto Program is incomplete.
8 channels were memorized.
Air : 7. Cable : 1
OK
EnterReturn
BP68-00588H-01Eng(032~059)  5/16/06  11:38 AM  Page 36 
						

							English - 37
Changing Channels
Using the Channel Buttons
When you press the CH  or CH  button, the TV changes channels in sequence. 
You will see all the channels that the TV has memorized. 
(The TV must have memorized at least three channels.)
You will not see channels that were either erased or not memorized.
Using the Number Buttons
Use the number buttons to quickly switch to any channel.  
Using the “-” Button
The “-” button is used to select stations that broadcast both a digital and analog signal.
For example, for channel 7-1 
(digital), press “7”, then “
-”, 
then “1”.
Using the Previous Channel
Press the PRE-CH button. 
The TV changes to the last channel you were watching.
Press the CH  or CH  button to change channels. 
Press the number buttons to go directly to a channel. For example, to select channel 27, press
“2,” then “7.” The TV will change channels when you press the second number.
NOTE
•HD indicates the TV is
receiving a Digital High
Definition signal.
SD indicates the TV is
receiving a Analog 
standard definition 
signal.
DTV Air
7 -1
BP68-00588H-00Eng(032~059)  4/25/06  3:34 PM  Page 37 
						

							Operation
English - 38
Customizing Your Remote Control
After it has been set up properly, your remote control can operate in five different modes: TV, VCR,
Cable, DVD, or Set-Top Box. Pressing the corresponding button on the remote control allows you to
switch between these modes, and control whichever piece of equipment you choose.
NOTE
•The remote control might not be compatible with all DVD Players, VCRs, Cable boxes,
and Set-Top Boxes.
Setting Up the Remote to Operate Your VCR
1
Turn off your VCR.
2
Press the VCR button on your TV’s remote control.
3
Press the SET button on your TVs remote control.
4
Using the number buttons on your remote control, enter three
digits of the VCR code listed on page 42 of this manual for your
brand of VCR. Make sure you enter three digits of the code, even
if the first digit is a “0”. (If more than one code is listed, try the
first one.)
5
Press the POWER button on the remote control.
Your VCR should turn on if your remote is set up correctly. 
If your VCR does not turn on after set-up, repeat steps 2, 3 and 4,
but try one of the other codes listed for your brand of VCR.
If no other codes are listed, try each VCR code, 000 through 080.
Note on Using Remote Control Modes: VCR
When your remote control is in “VCR” mode, the volume buttons still
control your TV’s volume.
BP68-00588H-00Eng(032~059)  4/25/06  3:34 PM  Page 38 
						

							English - 39
Setting Up the Remote to Operate Your Cable Box
1
Turn off your cable box.
2
Press the CABLE button on your TV’s remote control.
3
Press the SET button on your TVs remote control.
4
Using the number buttons on your remote control, enter three
digits of the cable box code listed on page 43 of this manual for
your brand of cable box. Make sure you enter three digits of the
code, even if the first digit is a “0”. 
(If more than one code is listed, try the first one.)
5
Press the POWER button on the remote control.
Your cable box should turn on if your remote is set up correctly. 
If your cable box does not turn on after set-up, repeat steps 2, 3
and 4, but try one of the other codes listed for your brand of cable
box. If no other codes are listed, try each code, 000 through 046.
Note on Using Remote Control Modes: Cable Box
When your remote control is in “CABLE” mode, the volume buttons 
still control your TV’s volume.
BP68-00588H-01Eng(032~059)  5/16/06  11:38 AM  Page 39 
						

							English - 40
Operation
Setting Up the Remote to Operate Your DVD
1
Turn off your DVD.
2
Press the DVD button on your TV’s remote control.
3
Press the SET button on your TVs remote control.
4
Using the number buttons on your remote control, enter three
digits of the DVD code listed on page 44 of this manual for your
brand of DVD. Make sure you enter three digits of the code, even
if the first digit is a “0”. (If more than one code is listed, try the
first one.)
5
Press the POWER button on the remote control.
Your DVD should turn on if your remote is set up correctly.
If your DVD does not turn on after set-up, repeat steps 2, 3 and 4,
but try one of the other codes listed for your brand of DVD. If no
other codes are listed, try each code, 000 through 141.
Note on Using Remote Control Modes: DVD
When your remote control is in “DVD” mode, the volume buttons still 
control your TV’s volume.
BP68-00588H-00Eng(032~059)  4/25/06  3:34 PM  Page 40