Samsung Hl-s5088W, Hl-s5688w, Hl-s6188w, Hl-s7178w Dlp Tv Owners Instructions

							English - 111
Channel List Reorganization
Deletes and reorganizes the channel list provided by CableCARD.
This feature should be used if you change or upgrade your CableCARD service.
1
Press the MENU button. 
Press the 
œor √button to select
“Setup”, then press the ENTER 
button.
2
Press the …or †button to select
“CableCARDTMSetup”, then press the
ENTER button.
3
Press the …or †button to select
“Channel List Reorganization”, then
press the ENTER button.
Setup
Enter
CableCARDTMSetup
CableCARD™ Reset
Channel List ReorganizationReturn
Setup
Enter
Setup
Language
Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
†Color Weakness
English
Off
Medium
OffReturn
Setup
Enter
Setup…Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
Color Weakness
PC
Function Help
CableCARD
TMCableCARDTMSetup√
Off
Medium
Off
Off
BP68-00588H-00Eng(090~113)  4/25/06  3:39 PM  Page 111 
						

							Special Features
English - 112
Using TV Guide On ScreenTM
Shows the on-screen information on the program, and sets the scheduled program options.
To activate TV Guide On ScreenTMfeature, follow the instructions below.
1
Press the MENU button.
Press the 
œor √button to select
“Listings”, then press the ENTER 
button.
2
Press the …or †button to select
“TV Guide On ScreenTM”, then press
the ENTER button.
Press the EXIT button to exit.
NOTES
•Refer to TV Guide On ScreenTMmanual for details.
•If the TV Guide On ScreenTMsystem is used during the
timer-recording using VCR or IEEE1394 connections, TV output
signal is recorded.
•However, you can only record digital channels using IEEE1394
devices.
•TV is automatically turned on and then searches the specific
channel to record at the scheduled recording time.
•TV will automatically be turned off when timer-recording
completes without remote control activation.
•See page 21 and 116 for information about timer-recording
VCR and IEEE1394 connections.
Listings
Enter
Listings
TV Guide On ScreenTMTV Guide On ScreenTMSetup
Return
Listings
Enter
Listings
TV Guide On ScreenTMTV Guide On ScreenTMSetup
Return
BP68-00588H-00Eng(090~113)  4/28/06  8:53 AM  Page 112 
						

							English - 113
Using TV Guide On ScreenTMSetup
1
If you want to set up the TV Guide On ScreenTMnow, select
“Set up TV Guide On Screen now“. For more information, refer
to INITIAL GUIDE SETUP in the TV Guide Manual.
2
If you want to set up TV Guide On ScreenTMlater and want the
reminder screen to be displayed each time you turn your TV
on, select “Remind me to set it up later”.
This option will return you to watching TV.
3
If you don’t want to set up TV Guide On ScreenTMnow and
also don’t want the reminder screen to be displayed each time
you turn your TV on, select “Don’t remind me again”.
“Don’t remind me again” will return you to watching TV and
stops the reminder screen from appearing upon power On.
Even if you select “Don’t remind me again” or close the screen
by pressing the EXIT or TV Guide button, you can set up TV
Guide On Screen
TMany time you want by pressing the TV
Guide button on your remote control. 
NOTES
•Press the EXIT or TV Guide button on the remote control to close
the Reminder screen without selecting any icon. The Reminder
screen will disappear. 
•Refer to TV Guide On Screen
TMmanual for details. 
Reminder Screen
To make a selection, use the up or down arrow key to highlight an
option, and press ENTER:
1
Press the MENU button.
Press the 
œor √button to select
“Listings”, then press the ENTER 
button.
2
Press the …or †button to select
“TV Guide On ScreenTMSetup”,
then press the ENTER button.
Listings
Enter
Listings
TV Guide On ScreenTMTV Guide On ScreenTMSetup
Return
Listings
Enter
Listings
TV Guide On ScreenTMTV Guide On ScreenTMSetup
Return
BP68-00588H-00Eng(090~113)  4/25/06  3:39 PM  Page 113 
						

							SAMSUNG
BP68-00588H-00Eng(114~129)  4/25/06  3:40 PM  Page 114 
						

							Using the D-Net
BP68-00588H-00Eng(114~129)  4/25/06  3:40 PM  Page 115 
						

							Using the D-Net
English - 116
How to connect compatible IEEE1394 Devices
Connecting compatible IEEE1394 devices is simple using this TV equipped with IEEE1394. 
A secure digital interface is provided to other digital home entertainment units, such as a DTV, 
Set-Top Box, AVHDD, digital VCR, or Mini-DV Camcorder. 
1
Connect the IEEE1394 
cable from the jack of the 
component with IEEE1394 
capability, such as a 
Set-Top Box or a Digital 
VCR to the IEEE1394 jack 
on the TV.
2
Press the D-Net button on the
Remote Control.
3
Select the D-Net (IEEE1394)
Compatible device. 
NOTES
•To access D-Net (IEEE1394) in the menu, see page 121.
•The IEEE1394 interface is equipped with a copy protection standard called Digital Transmission
Content Protection (DTCP).
•The name of 1394 Jack may be different according to the manufacturer (i.e., DTV LINK or i.LINK).
•The supported video format is MPEG-2 Digital video. Other digital video formats (e.g. DV 
format...) are not supported. 
For audio, Dolby Digital and MPEG Digital Audio are supported, other digital audio formats 
(e.g. MP3, DTS) are not supported. 
•Because IEEE1394 is an evolving technology, it is possible that some or all of the connectivity 
features of a device you connect to the TV through the IEEE1394 port may not operate.
•There may be a single IEEE1394 jack depending on the specifications of the external device.   
•If only a single IEEE1394 jack is supported, connect the cable to the IEEE1394 jack of the
IEEE1394 device that supports D-Net.
What’s D-Net?
This refers to a home network consisting of devices supporting D-Net (IEEE1394) connections
(such as digital VCRs and Set-Top Boxes) for digital audio and video data.
D-Net (IEEE1394) interface is capable of supporting various high-end digital A/V applications,
such as A/V device control and signal routing, Digital Video (DV) editing, home networking.
TV Rear Panel
IEEE1394 cable
Digital VCR (D-VHS)
1
BP68-00588H-00Eng(114~129)  4/25/06  3:40 PM  Page 116 
						

							English - 117
When Connecting D-Net (IEEE1394) Compatible devices
1
The last device in the chain may not be looped back to the TV as the TV may not be able to
work with the other devices.
To connect two or more D-Net (IEEE1394) Compatible devices, follow the diagram below.
A maximum 10 D-Net (IEEE1394)
Compatible devices can be 
connected.
Do not connect D-Net (IEEE1394)
Compatible devices in a way 
that creates a loop.
NOTE
•IEEE1394 cables longer than 14.76 feet (177.16 inches) should not be used between devices.
IEEE1394
cableIEEE1394
cable
IEEE1394
cableIEEE1394
cable
IEEE1394
cable IEEE1394
cableIEEE1394
cable
IEEE1394
cable
IEEE1394
cable
IEEE1394
cableIEEE1394
cable
IEEE1394
cable IEEE1394
cableIEEE1394
cable
BP68-00588H-00Eng(114~129)  4/25/06  3:40 PM  Page 117 
						

							Using the D-Net
English - 118
Connection Options
There are two different connection options for connecting D-Net (IEEE1394) compatible devices. 
Select the most suitable option according to your network of audio/video products.
The Direct Device-To-Device Option
D-Net (IEEE1394) permits the chaining of devices, unlike 
analog audio and video connections where each device
needs to be individually connected to the TV. This allows
you to connect your D-VHS to your 1394 Set-Top Box
only, then connect the Set-Top Box to the TV. 
More IEEE1394 devices can be added to the chain as
needed. Each video device can be viewed on the TV’s 
D-Net and information can be sent from any IEEE1394
device to other compatible devices.
The Hub Connection Option
D-Net (IEEE1394) also permits connecting devices using the TV as a hub. Each device is capable of 
sending information, which may include audio and video, to any other device on the network.
DTV STB
Digital VCR
DTV STB Digital VCR 1394 Monitor Other 1394 Device
Digital VCR
BP68-00588H-00Eng(114~129)  4/25/06  3:40 PM  Page 118 
						

							English - 119
4-Pin and 6-Pin Connectors
Two different types of connectors are used for IEEE1394 terminals and cables, a 4-pin and 
a 6-pin.
The 4-pin connector sends digital audio, digital video and digital
control signals to and from devices. The TV has two available 4-pin
connection jacks, of which two are at the back.
The 6-pin connector also sends digital audio, video and control
signals, but in addition, sends low voltage electrical power. 
There are no 6 pin connectors on this TV.
It is not possible to directly connect a 6-pin connector to a 4-pin jack,
and vice versa. In order to connect a 6-pin device to a 4-pin device,
an adaptor or adaptor cable is required, easily purchased from an
electronic or computer store.
Connecting a 6-pin device (such as a camcorder) via an adapter to the TV, (if it is designed to
receive electrical power from another 6-pin device) will require that the camcorder be directly 
connected to the AC supply, or that the camcorder’s battery power be used.
BP68-00588H-00Eng(114~129)  4/25/06  3:40 PM  Page 119 
						

							Using the D-Net
English - 120
Selecting a D-Net device
Prior to viewing an IEEE1394 device, it first needs to be selected in the D-Net Device List.
1
Connect the relevant D-Net (IEEE1394) Compatible device in the list.
(See “How to connect compatible IEEE1394 Devices” on page 116)
2
Press the D-Net button on the remote control.
3
Select a connected D-Net device by pressing
the 
…or †button.
4
To select a device, press the ENTER button. 
Then display the D-Net device control panel 
and operate the selected device.
•The device list is in the order of DTV, STB, AVHDD, DVHS, Camcorder and UNCONTROLLABLE.
If there are multiple devices of the same type, the devices will be listed in ascending order of
the manufacturer name with Samsung first as the exception. If there are multiple devices of the
same type and they are manufactured by the same company, they will be listed in the order 
of their serial number.
•The TV and all other devices connected
on the D-Net (IEEE1394) chain appear in
the D-Net device list.
•If “UNCONTROLLABLE” is listed in the
device list, the device is not supported by
the TV, and cannot be controlled with the
TV remote control or the D-Net control
panel on the screen. 
•It is possible to connect a D-Net device to
another device and to the TV while the TV 
is ON. The D-Net device list automatically
adds the newly-connected device to the list. 
See “How to connect compatible IEEE1394
Devices”, page 116 for connecting 
D-Net (IEEE1394) Compatible devices.
•At this time, the screen changes to the 
picture from the selected device.
Copy-free
BP68-00588H-00Eng(114~129)  4/25/06  3:40 PM  Page 120