Samsung Hl-s5088W, Hl-s5688w, Hl-s6188w, Hl-s7178w Dlp Tv Owners Instructions

							PC Display
BP68-00588H-00Eng(130~141)  4/25/06  3:41 PM  Page 131 
						

							PC Display
English - 132
Using Your TV as a Computer (PC) Display
How to Connect Your PC to the TV
This figure shows the Standard Connector-jack panel. The actual configuration on your TV may be 
different, depending on the model.
Connecting a PC (15p D-SUB) to the TV
1
Connect a PC cable between
the PC output jack on the 
PC and the RGB input jack 
(PC IN) on the TV.
2
Connect a Audio cable
between the Audio output 
jack on the PC and the
Audio input jack (PC AUDIO
IN) on the TV.
NOTE
•You cannot connect this TV
to a PC via HDMI/DVI.
15Pin (D-Sub)
Cable
PCAudio Cable TV Rear Panel
12
BP68-00588H-01Eng(130~141)  5/16/06  1:01 PM  Page 132 
						

							English - 133
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. But the actual screens on your
PC will probably be different, depending upon your particular version of Windows and your particular
video card. But even if your actual screens look different, the same, basic set-up information will apply
in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1. Right click the mouse on the Windows Desktop, 
then click on Properties. The Display Properties
dialog-box will be displayed.
continued... 2Click on Settings, then set the Display Mode with
reference to the Display Modes Table. (See next
page) You do not need to change the Colors
settings.
3Click on Advanced. A new settings dialog box
will be displayed.
4Click on the Monitor tab, then set the Screen
Refresh Rate with reference to the Display Modes
Table. Set the Vertical Frequency and Horizontal
Frequency individually if you can do so, instead 
of setting the Screen Refresh Rate.
5Click “OK”, then the dialog-box will disappear.
Click “OK” on the “Display Properties”
dialog-box.
6Shutdown the PC, and connect it to your TV.
*The actual screens on your PC may look 
different, depending on your particular version 
of Windows and the type of your PC.
*When you use your TV as a PC monitor, 
it supports Colors up to 32 bits.
*In this case, the display on the TV may look 
different depending on your particular version 
of Windows or the PC manufacturer.
*When connecting a PC, you must set it to the 
display settings that are supported by the TV. 
Otherwise, the message “Out of input range”
will be displayed.
2
3
4
5
BP68-00588H-01Eng(130~141)  5/16/06  1:01 PM  Page 133 
						

							PC Display
English - 134
NOTES
•The Modes Table conforms to the regulations of IBM/VESA and is prepared based on analog input
standards.
•Resolutions other than the resolutions above are not supported in PC mode.
Checklist Before Connecting to a PC
•Adjust the PC Display Setup to the resolution and frequency values that are supported by the TV.
•Please read the user’s manual provided with the PC (Graphic Card & Sound Card).
•Do not supply power to either device until all connections are complete.
Supplying power in the middle of connecting may cause damage to the product.
•Check the terminal types for the PC’s graphic card.
Resolution
640 x 350
640 x 480
640 x 480
800 x 600
1024 x 768
1152 x 864
1280 x 960
1280 x 1024
1600 x 1200
1920 x 1200RB
Vertical Frequency [Hz]
70.086
59.94
72.809
75
60.317
72.188
75
60.004
70.069
75.029
75
60
60.02
75.025
60
59.885Horizontal Frequency [KHz]
31.469
31.469
37.861
37.5
37.879
48.077
46.875
48.363
56.476
60.023
67.5
60
63.981
79.976
75
74.556Vertical Polarity
N
N
N
N
P
P
P
N
N
P
P
P
P
P
P
PHorizontal PolarityP
N
N
N
P
P
P
N
N
P
P
P
P
P
P
N
Mode
IBM
VESA
Setting the Display Modes to be Compatible with Your TV
BP68-00588H-00Eng(130~141)  4/25/06  3:41 PM  Page 134 
						

							English - 135
Adjusting the Picture Quality
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not
removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again.
After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen.
1Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the 
œor √button to select
“Setup”, then press the ENTER 
button.
3
Press the …or †button to select
“PC”, then press the ENTER button.
4
Press the …or †button to select
“Image Lock”, then press the ENTER
button.
5
Press the …or †button to select
“Coarse” or “Fine”, then press the
ENTER button.
6
Press the œor √button to remove
the picture noise.
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
NOTE
•This feature may change
the width of the image.
If necessary, adjust the
position to center.
Setup
Enter
PC
Image Lock√Position
Auto Adjustment
Image Reset
Resolution
1024x 768 @75Hz
Return
Setup
Enter
Image Lock
Coarse 1344
Fine 0Return
Setup
Image Lock
Coarse 1344
Fine 0Return
Setup
Enter
Setup
Language
Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
†Color Weakness
English
Off
Medium
OffReturn
Setup
Enter
Setup…Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
Color Weakness
PC
√Function Help
CableCARDTMCableCARDTMSetup
Off
Medium
Off
Off
Adjust
EnterAdjust
BP68-00588H-00Eng(130~141)  4/25/06  3:41 PM  Page 135 
						

							PC Display
English - 136
Changing the Picture Position
After connecting the TV to your PC, adjust the position of the picture if it is not well-aligned.
1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the 
œor √button to select
“Setup”, then press the ENTER 
button.
3
Press the …or †button to select
“PC”, then press the ENTER button.
4
Press the …or †button to select
“Position”, then press the ENTER 
button.
5
Adjust the position of picture
by pressing the 
…/†/œ/√
button.
Press the ENTER button.
Select “Return” by pressing
the 
…or † button, then 
press the ENTER button to 
return to the previous menu. 
Press the EXIT button to exit.
Setup
Enter
PC
Image Lock
Position√Auto Adjustment
Image Reset
Resolution
1024x 768 @75Hz
Return
Position
AdjustEnterReturn
▼
▼
▲
Setup
Enter
Setup
Language
Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
†Color Weakness
English
Off
Medium
OffReturn
Setup
Enter
Setup…Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
Color Weakness
PC
√Function Help
CableCARDTMCableCARDTMSetup
Off
Medium
Off
Off
▼
BP68-00588H-00Eng(130~141)  4/25/06  3:41 PM  Page 136 
						

							1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the 
œor √button to select
“Setup”, then press the ENTER 
button.
3
Press the …or †button to select
“PC”, then press the ENTER button.
4
Press the …or †button to select
“Auto Adjustment”, then press the
ENTER button.
The picture quality and position are
automatically adjusted, and the
picture returns to original view
a few seconds later.
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
English - 137
Adjusting the Picture Quality and Position Automatically
This feature allows the TV to self-adjust to the incoming video signal. The values of fine, coarse and
position are adjusted automatically.
Setup
Enter
PC
Image Lock
Position
Auto Adjustment
Image Reset
Resolution
1024x 768 @75Hz
Return
Auto Adjustment in Progress
Please Wait.
Setup
Enter
Setup
Language
Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
†Color Weakness
English
Off
Medium
OffReturn
Setup
Enter
Setup…Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
Color Weakness
PC
√Function Help
CableCARDTMCableCARDTMSetup
Off
Medium
Off
Off
BP68-00588H-00Eng(130~141)  4/25/06  3:41 PM  Page 137 
						

							PC Display
English - 138
Changing the Picture Size (PC Mode)
You can select the picture size which best corresponds to your viewing requirements.
1
Press the SOURCE button to select “PC”.
2
Press the MENU button. 
Press the 
œor √button to select
“Picture”, then press the ENTER 
button.
Press the 
…or †button to select
“Size”, then press the ENTER button.
3
Press the …or †button to select the
screen format you want, then press
the ENTER button.
Select “Return” by pressing the 
…or † button, then press the
ENTER button to return to the previous menu.
Press the EXIT button to exit.
Alternate method
Press the P.SIZE button on the
remote control repeatedly to
change the picture Size.
•“Wide”: The picture position 
(     ,     ) and size (     )
adjustments are available by
pressing the 
…/†/œ/√button.
Picture
Enter
Picture
Mode
Size
Digital NR
DNIe
My Color Control
Film ModeWide
On
Off
Off
Return
Picture
Enter
Picture
Mode
Size
Digital NR
DNIe
My Color Control
Film ModeWide
On
On
Off 
Return
Wide
4:3
Wide▲
▼
•“Wide”: Scales the picture to
92% of the TV screen, regardless
of the aspect ratio of the input
source. 
•“4:3”: Displays the picture as it
is without changing the aspect
ratio of input source.
BP68-00588H-00Eng(130~141)  4/25/06  3:41 PM  Page 138 
						

							English - 139
Viewing the Current Resolution
You can get the resolution information of your PC.
1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the 
œor √button to select
“Setup”, then press the ENTER 
button.
3
Press the …or †button to select
“PC”, then press the ENTER button.
The resolution information is
displayed on the screen.
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
NOTE
•To change the resolution, see pages 133~134.
Setup
Enter
PC
Image Lock
Position
Auto Adjustment
Image Reset
Resolution
1024x768 @75Hz
Return
Setup
Enter
Setup
Language
Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
†Color Weakness
English
Off
Medium
OffReturn
Setup
Enter
Setup…Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
Color Weakness
PC
√Function Help
CableCARDTMCableCARDTMSetup
Off
Medium
Off
Off
BP68-00588H-00Eng(130~141)  4/25/06  3:41 PM  Page 139 
						

							PC Display
English - 140
Initializing the Picture Settings
You can replace all picture settings with the factory default values.
1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the 
œor √button to select
“Setup”, then press the ENTER 
button.
3
Press the …or †button to select
“PC”, then press the ENTER button.
4
Press the …or †button to select
“Image Reset”, then press the ENTER
button.
The picture settings are replaced with
the factory default values.
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
Setup
Enter
PC
Image Lock
Position
Auto Adjustment
Image Reset
Resolution
1024x768 @75Hz
Return
Image Reset is completed.
Setup
Enter
Setup
Language
Clock
Timer
Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
†Color Weakness
English
Off
Medium
OffReturn
Setup
Enter
Setup…Game Mode
V-Chip
Caption
Menu Transparency
Blue Screen
Color Weakness
PC
√Function Help
CableCARDTMCableCARDTMSetup
Off
Medium
Off
Off
BP68-00588H-00Eng(130~141)  4/25/06  3:41 PM  Page 140