Samsung HL-R5656W Dlp Tv Owners Instructions
Have a look at the manual Samsung HL-R5656W Dlp Tv Owners Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Channel Control BP68-00524A-00(026~047) 6/3/05 3:18 PM Page 41
Channel Control English - 42 Selecting Your Favorite Channels You can store your favorite channels for each available input source (such as TV and CATV). This allows you to quickly and easily find frequently watched channels by pressing the FAV.CH button on the remote control. To Store Your Favorite Channels: 1 Press the MENU button. Press the …or †button to select “Channel”, then press the ENTER button. 2 Press the …or †button to select “Favorite Channels”, then press the ENTER button. Press the …or † button to select a channel, then press the ENTER button and a check mark will appear. Press the ENTER button again to deselect the selected channel and the check mark will disappear. Press the EXIT button to exit. NOTES • Only memorized channels can be set as Favorite channels. • Select All : Press to select all channels. • Clear All : Press to clear all channels. To View Your Favorite Channels: Press the FAV.CH button repeatedly to jump from one favorite channel to another. Channel Antenna : Air√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√Signal Strength√LNA : On√ MoveEnterReturn Input Picture Sound Channel Setup Guide Favorite Channels MoveEnterReturn Input Picture Sound Channel Setup Guide Air2 ✔Air3Air4Air5Air6Air7Air8▼ Select All Clear All BP68-00524A-00(026~047) 6/3/05 3:18 PM Page 42
English - 43 Labeling the Channels Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”, “PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or a blank. When the INFO button is pressed, the channel label will appear below to the channel number. 1 Press the CH or CH button to tune to the channel that will be labeled. 2 Press the MENU button. Press the …or †button to select “Channel”, then press the ENTER button. Press the …or †button to select “Name”, then press the ENTER button. 3 Press the …or †button to move to the channel to be assigned to a new name, then press the ENTER button. Press the …or †button to select a letter, a number or a blank. (Results in this sequence: A...Z, 0...9, +, -, ✽, /, blank). 4 Press the √button to switch to the next field, which will be selected. Select a second letter or digit pressing …or †button, as above. Repeat the process to select the last three digits. After all settings are completed, select OK using the √button. Press the ENTER button to save the settings and return to the previous menu. To erase the assigned new name, select “Clear” by pressing the œor √button, then press the ENTER button. Press the EXIT button to exit. NOTE •If you add or delete a TV channel, the labeled channels will also be added or deleted. Channel Antenna : Air√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√Signal Strength√LNA : On√ MoveEnterReturn Input Picture Sound Channel Setup Guide Name MoveAdjustReturn Input Picture Sound Channel Setup Guide ClearClearClearClearClear Air2 AAir3Air4Air5Air6 ▲ ▼ ▼ Name MoveAdjustReturn Input Picture Sound Channel Setup Guide ClearClearClearClearClear Air2 CNN02Air3Air4Air5Air6 ▲ ▼OK OK ▼ BP68-00524A-00(026~047) 6/3/05 3:18 PM Page 43
English - 44 Channel Control Fine Tuning Analog Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1 Press the MENU button. Press the …or †button to select “Channel”, then press the ENTER button. 2 Press the …or †button to select “Fine Tune”, then press the ENTER button. 3 Press the œor √button to adjust the fine tuning. 4 To store the fine tuning setting in the TV’s memory, press the ENTER button. To reset the fine tuning setting, press the †button to select “Reset”, then press the ENTER button. 5 Press the EXIT button to exit. NOTE •Only analog TV channels can be fine tuned. Channel Antenna : Cable√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√Signal Strength√LNA : Off√ MoveEnterReturn Input Picture Sound Channel Setup Guide Channel Antenna : Cable√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√Signal Strength√LNA : Off√ MoveEnterReturn Input Picture Sound Channel Setup Guide Fine Tune Cable 26 Not Fine Tuned 0 MoveEnterReturn Reset Fine Tune Cable 26 Not Fine Tuned 3 AdjustSaveReturn Reset Fine Tune Cable 26 Fine Tuned 3 AdjustSaveReturn Reset Analog BP68-00524A-00(026~047) 6/3/05 3:18 PM Page 44
English - 45 Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels. 1 Press the MENU button. Press the …or †button to select “Channel”, then press the ENTER button. 2 Press the …or †button to select “Signal Strength”, then press the ENTER button. If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal. Press the EXIT button to exit. Channel Antenna : Cable√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√Signal Strength√LNA : Off√ MoveEnterReturn Input Picture Sound Channel Setup Guide Channel Antenna : Cable√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√Signal Strength√LNA : Off√ MoveEnterReturn Input Picture Sound Channel Setup Guide Signal Strength EnterReturn Input Picture Sound Channel Setup Guide OK Digital BP68-00524A-00(026~047) 6/3/05 3:18 PM Page 45
Channel Control English - 46 LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). 1 Press the MENU button. Press the …or †button to select “Channel”, then press the ENTER button. 2 Press the …or †button to select “LNA”, then press the ENTER button. 3 Press the …or †button to select “On” or “Off”, then press the ENTER button. 4 Press the EXIT button to exit. NOTES •LNA functions only when antenna is set to Air. The settings will be stored separately in each channel. •If the picture is noisy with the LNA set to On, select Off. •The LNA setting must be made separately for each channel. Channel Antenna : Air√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√Signal Strength√LNA : On√ MoveEnterReturn Input Picture Sound Channel Setup Guide Channel Antenna : Air Auto Program Add/Delete Favorite Channels Name Fine Tune Signal Strength LNA : On MoveEnterReturn Input Picture Sound Channel Setup Guide Channel Antenna : Air√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√Signal Strength√LNA : On√ MoveEnterReturn Input Picture Sound Channel Setup Guide Off On BP68-00524A-00(026~047) 6/3/05 3:18 PM Page 46
Picture Control BP68-00524A-00(026~047) 6/3/05 3:18 PM Page 47
Picture Control English - 48 Picture Control You can select the type of picture which best corresponds to your viewing requirements. Changing the Picture Standard 1 Press the MENU button. Press the …or †button to select “Picture”, then press the ENTER button. 2 Press the ENTER button again to select “Mode”. 3 Press the ENTER button. Press the …or †button to select the desired picture mode (Dynamic, Standard, Movie, Custom), then press the ENTER button. Press the EXIT button to exit. Alternate method Press the P.MODE button on the remote control repeatedly to select the desired picture mode. •Choose “Dynamic” for viewing the TV during the day or when there is a bright light in the room. •Choose “Standard” for the standard factory settings. •Choose “Movie” when viewing a movie. •Choose “Custom” if you want to adjust the settings according to personal preference (see “Customizing the Picture Settings”, page 49). Picture Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√ MoveEnterReturn Input Picture Sound Channel Setup Guide Mode Mode : Standard√Contrast 90 Brightness 50 Sharpness 65 Color 60 Tint G 50 R 50 Color Tone : Warm1 √Reset MoveEnterReturn Input Picture Sound Channel Setup Guide Mode Mode : Standard Contrast 90 Brightness 50 Sharpness 65 Color 60 Tint G 50 R 50 Color Tone : Warm1 Reset MoveEnterReturn Input Picture Sound Channel Setup Guide Dynamic Standard Movie Custom Standard BP68-00524A-00(048~061) 6/3/05 3:26 PM Page 48
English - 49 1 Press the MENU button. Press the …or †button to select “Picture”, then press the ENTER button. 2 Press the ENTER button to select “Mode”. 3 Press the ENTER button. Press the …or †button to select the desired picture mode (Dynamic, Standard, Movie, Custom), then press the ENTER button. 4 Press the …or †button to select a particular option (Contrast, Brightness, Sharpness, Color, or Tint), then press the ENTER button. Press the œor √button to decrease or increase the value of a particular item. Continued... Customizing the Picture Settings You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”, “Tint”, and “Color Tone” according to personal preference. You can select “Standard” which automatically recalls your personalized picture settings. Picture Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√ MoveEnterReturn Input Picture Sound Channel Setup Guide Mode Mode : Standard√Contrast 90 Brightness 50 Sharpness 65 Color 60 Tint G 50 R 50 Color Tone : Warm1 √Reset MoveEnterReturn Input Picture Sound Channel Setup Guide Mode Mode : Dynamic√Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G 50 R 50 Color Tone : Cool1 √Reset MoveEnterReturn Input Picture Sound Channel Setup Guide Mode Mode : Standard Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G 50 R 50 Color Tone : Cool1 Reset MoveEnterReturn Input Picture Sound Channel Setup Guide Dynamic Standard Movie Custom ▲Contrast▼90•You can also select these options (Contrast, Brightness, Sharpness, Color, or Tint) by pressing the …or †button. NOTES •“Tint” doesn’t operate in HDMI or 480p Component or higher modes. •The Tint cannot be adjusted while watching Digital TV. BP68-00524A-00(048~061) 6/3/05 3:26 PM Page 49
Picture Control English - 50 5 Press the ENTER button to return to “Mode”. Press the …or †button to select “Color Tone”, then press the ENTER button. 6 Press the …or †button to select a particular option(Cool2, Cool1, Normal, Warm1, or Warm2), then press the ENTER button. Press the EXIT button to exit. NOTE •Color tone is not available in the “Movie” picture mode. 7To return the factory defaults, select “Reset” by pressing the …or †button. Press the ENTER button. •The previously adjusted settings will be reset to the factory defaults. Resetting the Picture Settings to the Factory Defaults Mode Mode : Dynamic√Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G 50 R 50 Color Tone : Cool1 √Reset MoveEnterReturn Input Picture Sound Channel Setup Guide Mode Mode : Dynamic Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G 50 R 50 Color Tone : Warm1 Reset MoveEnterReturn Input Picture Sound Channel Setup Guide Cool2 Cool1 Normal Warm1 Warm2 Mode Mode : Dynamic√Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G 50 R 50 Color Tone : Cool1 √Reset MoveEnterReturn Input Picture Sound Channel Setup Guide BP68-00524A-00(048~061) 6/3/05 3:26 PM Page 50