Samsung HL-R5656W Dlp Tv Owners Instructions
Have a look at the manual Samsung HL-R5656W Dlp Tv Owners Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English - 31 Changing Channels Using the Channel Buttons When you press the CH or CH button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.) You will not see channels that were either erased or not memorized. Using the Number Buttons Use the number buttons to quickly switch to any channel. Using the “-” Button The “-” button is used to select stations that broadcast both a digital and analog signal. For example, for channel 7-1 (digital), press “7”, then “ -”, then “1”, and you will see as right. For channel 7-2 (analog), press “7”, then “ -”, then “2”, and you will see as right. Using the Previous Channel Press the PRE-CH button. The TV changes to the last channel you were watching. Press the CH or CH button to change channels. Press the number buttons to go directly to a channel. For example, to select channel 27, press “2,” then “7.” The TV will change channels when you press the second number. NOTE •HD indicates the TV is receiving a Digital High Definition signal. SD indicates the TV is receiving a Analog standard definition signal. DTV Air 7- 1 English Picture Mode Standard Sound Mode Standard MTS English Caption On V-Chip Off 12:00 am Air 7-2 Mono Picture Mode Standard Sound Mode Standard MTS Stereo Caption On V-Chip Off 12:00 am BP68-00524A-00(026~047) 6/3/05 3:18 PM Page 31
Operation English - 32 Customizing Your Remote Control Your TV comes equipped with a universal remote control. In addition to controlling the TV, the universal remote control can also operate a VCR, Cable box, DVD, and some Samsung Set-top boxes (even if your VCR, Cable box and DVD are made by manufacturers other than Samsung). NOTE •The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes. Setting Up Your Remote Control to Operate Your VCR (Cable box or DVD player) 1 Turn off your VCR (Cable box or DVD player). 2 Press the MODE button to switch the remote control to the VCR (CABLE or DVD) mode. The remote control has five modes: TV, STB, VCR, CABLE, and DVD. 3 On your Samsung remote control, press the SET button. 4 Enter 3 digits of the VCR (Cable box or DVD player) code listed on next page for your brand of VCR (Cable box or DVD player). Make sure you enter 3 digits of the code, even if the first digit is a “0”. (If more than one code listed, try the first one.) 5 Press the POWER button. Your VCR (Cable box or DVD player) should turn on. If your VCR (Cable box or DVD player) turns on, your remote control is now set correctly. If your VCR (Cable box or DVD player) does not turn on, repeat steps 2, 3, and 4, but try one of the other codes listed for the brand of your particular VCR (Cable box or DVD player). 6 Once your remote control is set up, press the MODE button any time you want to use the remote to operate your VCR (Cable box or DVD player). NOTES •When your remote is in the TV mode, the VCR (or DVD player) control buttons (REW, STOP, PLAY/PAUSE, and FF) will still operate your VCR (or DVD player). •When your remote control is in the STB, VCR, CABLE, or DVD mode, the volume buttons still control your TV’s volume. BP68-00524A-00(026~047) 6/3/05 3:18 PM Page 32
English - 33 Remote Control Codes VCR Codes DVD Codes Cable Box Codes BP68-00524A-00(026~047) 6/3/05 3:18 PM Page 33
Operation English - 34 Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) 1 Press the MENU button. Press the …or †button to select “Setup”, then press the ENTER button. 2 Press the …or †button to select “Time”, then press the ENTER button. Press the ENTER button to select “Clock”. 3Press the ENTER button to select “Clock Mode”. Press the …or † button to select “Manual”, then press the ENTER button. 4Press the …or †button to select “Clock Set”, then press the ENTER button. 5Press the œor √button to move to “Month”, “Day”, “Year”, “Hour”, “Minute”, or “am/pm”. Set the clock you want by pressing the …or † button, then press the ENTER button. Press the EXIT button to exit. Option 1: Setting the Clock Manually •You can set the month, day, year, hour and minute directly by pressing the number buttons on the remote control. Setup Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√Function Help: Off√ MoveEnterReturn Input Picture Sound Channel Setup Guide Time --/ --/ ----/ -- : -- -- Clock√Sleep Timer : Off√On Timer : Inactivated√Off Timer : Inactivated√ MoveEnterReturn Input Picture Sound Channel Setup Guide Clock --/ --/ ----/ -- : -- -- Clock Mode :Auto Clock Set Time Zone DST : No MoveEnterReturn Input Picture Sound Channel Setup Guide Clock --/ --/ ----/ -- : -- -- Clock Mode : Manual√Clock Set√Time Zone√DST : No√ MoveEnterReturn Input Picture Sound Channel Setup Guide Clock Set MoveAdjustReturn Input Picture Sound Channel Setup Guide Enter the current date and time. HourMinute am/pm-- -- -- MonthDay Year▲--------▼ Manual Auto NOTE •The current time will appear every time you press the INFO button. BP68-00524A-00(026~047) 6/3/05 3:18 PM Page 34
English - 35 Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. 1 Press the MENU button. Press the …or †button to select “Setup”, then press the ENTER button. 2 Press the …or †button to select “Time”, then press the ENTER button. Press the ENTER button to select “Clock”. 3 Press the ENTER button to select “Clock Mode”. Press the …or †button to select “Auto”, then press the ENTER button. 4 Press the …or †button to select “Time Zone”, then press the ENTER button. Press the …or †button to highlight the time zone for your local area (and to move the highlight to the appropriate time zone on the map of the United States), then press the ENTER button. 5 Press the …or †button to select “DST”(Daylight Saving Time), then press the ENTER button. Press the …or †button to select “Yes” or “No”, then press the ENTER button. Press the EXIT button to exit. •When you set up Auto Time, the set time may not be correct depending on the broadcasting station and signal. If there is a difference between the real time and set time, please set the time manually. Setup Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√Function Help: Off√ MoveEnterReturn Input Picture Sound Channel Setup Guide Time --/ --/ ----/ -- : -- -- Clock√Sleep Timer : Off√On Timer : Inactivated√Off Timer : Inactivated√ MoveEnterReturn Input Picture Sound Channel Setup Guide Clock --/ --/ ----/ -- : -- -- Clock Mode: Auto Clock Set Time Zone DST : No MoveEnterReturn Input Picture Sound Channel Setup Guide Clock --/ --/ ----/ -- : -- -- Clock Mode : Auto Clock Set Time Zone DST : No MoveEnterReturn Input Picture Sound Channel Setup Guide Time Zone MoveEnterReturn Input Picture Sound Channel Setup Guide Atlantic Eastern Central Mountain Pacific Alaska HawaiiSelect the time zone where you locate. Manual Auto Ye s No BP68-00524A-00(026~047) 6/3/05 3:18 PM Page 35
Operation English - 36 Setting the On/Off Timer 1 Press the MENU button. Press the …or †button to select “Setup”, then press the ENTER button. 2 Press the …or †button to select “Time”, then press the ENTER button. Press the …or †button to select “On Timer”, then press the ENTER button. Press the …or †button to adjust “Hour”, then press the √button to move to the next step. Set other items using the same method as above. To activate On Timer with the setting entered, set Activation to “Yes” by pressing …or † button. When finished, press the MENU button to return. 3 Press the …or †button to select “Off Timer”, then press the ENTER button. Press the …or †button to adjust “Hour”, then press the √button to move to the next step. Set other items using the same method as above. To activate Off Timer with the setting entered, set Activation to “Yes” by pressing …or † button. When finished, press the EXIT button to exit. Setup Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√Function Help: Off√ MoveEnterReturn Input Picture Sound Channel Setup Guide Time 1/ 1/ 2005/ 12 : 00 am Clock√Sleep Timer : Off√On Timer : Inactivated√Off Timer : Inactivated√ MoveEnterReturn Input Picture Sound Channel Setup Guide •You can set the hour, minute, channel, and volume directly by pressing the number buttons on the remote control. On Timer MoveAdjustReturn Input Picture Sound Channel Setup GuideEnter the On Timer options. ChannelVolume Activation310 No Hour Minute am/pm Antenna▲12 00 am Air▼ Off Timer MoveAdjustReturn Input Picture Sound Channel Setup GuideEnter the Off Timer options. Hour Minute am/pm Activation▲12 00 am No▼ NOTE •Auto Power Off When you set the timer “On”, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer “On” mode and prevents overheating or leakage, which may occur if a TV is on for too long (when you are on vacation, for example). BP68-00524A-00(026~047) 6/3/05 3:18 PM Page 36
English - 37 Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes). 1 Press the MENU button. Press the …or †button to select “Setup”, then press the ENTER button. 2 Press the …or †button to select “Time”, then press the ENTER button. Press the …or †button to select “Sleep Timer”, then press the ENTER button. 3 Press the …or †button to adjust “Minute”. 4 Setting the Timer sets the Activation to “Yes” automatically. Press the EXIT button to exit. Alternate method Press the SLEEP button under the remote’s cover repeatedly until the appropriate time interval appears (any of the preset values from “30 min” to “180 min”). Time 1/ 1/ 2005/ 12 : 00 am Clock√Sleep Timer : Off√On Timer : Inactivated√Off Timer : Inactivated√ MoveEnterReturn Input Picture Sound Channel Setup Guide Setup Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√Function Help: Off√ MoveEnterReturn Input Picture Sound Channel Setup Guide Sleep Timer MoveAdjustReturn Input Picture Sound Channel Setup GuideSet sleep timer. MinuteActivation ---No▲ ▼ Sleep Timer MoveAdjustReturn Input Picture Sound Channel Setup GuideSet sleep timer. MinuteActivation 30 Yes▲ ▼ Sleep Timer : 90 min BP68-00524A-00(026~047) 6/3/05 3:18 PM Page 37
English - 38 Operation Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable). Setting the Signal Source 1 Press the MENU button. Press the ENTER button to select “Input”. 2 Press the ENTER button to select “Source List”. Press the …or †button to select a signal source, then press the ENTER button. Alternate method Press the SOURCE button on the remote control repeatedly to select an external signal source. NOTES •Before selecting an input source, connect an external device first. •HDMI input can be selected only when the external device is turned on and connected to the TV. AV 1 •When you connect equipment to the TV, you can choose between the following sets of jacks: “AV1”, “AV2”, “S-VIDEO1”, “S-VIDEO2”, “COMPONENT1”, “COMPONENT2”, or “HDMI/DVI” on the TV’s rear panel and “AV3” or “S-VIDEO3” on the TV’s side panel. Input Source List : TV√Edit Name√Anynet MoveEnterReturn Input Picture Sound Channel Setup Guide Source List TV AV 1----AV 2----AV 3----S-Video1----S-Video2----S-Video3----▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide BP68-00524A-00(026~047) 6/3/05 3:18 PM Page 38
English - 39 Assigning Names to External Input Mode This feature enables you to name the input source you have connected. 1 Press the MENU button. Press the ENTER button to select “Input”. 2 Press the …or †button to select “Edit Name”, then press the ENTER button. 3 Press the …or †button to select a signal source to edit, then press the ENTER button. 4 Press the …or †button to select the external device : VCR, DVD, D-VHS, Cable STB, HD STB, Satellite STB, PVR STB, AV Receiver, DVD Receiver, GAME, Camcorder,DVD Combo, DVD HDD Recorder, Internet TV Recv., Interactive TV Recv., VOD (Video On Demand) STB, TV. Press the ENTER button. Set other signal sources (AV2, AV3, S-Video1, S-Video2, S-Video3, Component1, Component2, HDMI) using the same method as listed above. Press the EXIT button to exit. Input Source List : TV√Edit Name√Anynet MoveEnterReturn Input Picture Sound Channel Setup Guide Input Source List : TV√Edit Name√Anynet MoveEnterReturn Input Picture Sound Channel Setup Guide Edit Name AV 1 : ----√AV 2 : ----√AV 3 : ----√S-Video1 : ----√S-Video2 : ----√S-Video3 : ----√Component1 : ----√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Edit Name AV 1 : ---AV 2 : ---AV 3 : ---S-Video1 : ---S-Video2 : ---S-Video3 : ---Component1 : ----▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide ----VCR DVD D-VHS Cable STB HD STB Satellite STB PVR STB ▼ BP68-00524A-00(026~047) 6/3/05 3:18 PM Page 39
SAMSUNG BP68-00524A-00(026~047) 6/3/05 3:18 PM Page 40