Samsung HL-R5656W Dlp Tv Owners Instructions

							English - 21
Connecting a DVD Player
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
Connecting to Y, PB, PR
1
Connect a set of audio
cables between the 
COMPONENT (1 or 2)
AUDIO (L, R) IN jacks on 
the TV and the AUDIO OUT
jacks on the DVD player.
2
To enable Component video
viewing, connect a set of 
video cables between the 
COMPONENT (1 or 2) 
VIDEO (Y, P
B, PR) IN jacks 
on  the TV and VIDEO 
(Y/P
B/PRor Y/CB/CR) OUT 
jacks on the DVD player.  
Connecting to Audio and Video Jacks
1
Connect a set of audio
cables between the AUDIO
IN (1 or 2) jacks on the TV
and the AUDIO OUT jacks
on the DVD player.
2
Connect a video cable
between the VIDEO IN (1 
or 2) jack on the TV and the
VIDEO OUT jack on the 
DVD player.
NOTE
•For an explanation of 
Component video, see your 
DVD player’s owner’s
manual.
DVD Player
Incoming
Cable or 
Antenna
TV Rear Panel
DVD Player
Incoming
Cable or 
AntennaTV Rear Panel
1
1
2
2
BP68-00524A-00(016~025)  6/3/05  3:17 PM  Page 21 
						

							Connecting a DTV Set-Top Box
Connecting to Y, PB, PR
1
Connect a set of audio
cables between the 
COMPONENT (1 or 2) 
AUDIO (L, R) IN jacks on 
the TV and the AUDIO OUT 
jacks on the Set-Top Box.
2
Connect a set of video
cables between the 
COMPONENT (1 or 2) 
VIDEO (Y, P
B, PR) IN jacks 
on the TV and VIDEO 
(Y/P
B/PRor Y/CB/CR) OUT 
jacks on the Set-Top Box.
Connecting to DVI (Digital Visual Interface)
1
Connect a set of audio
cables between the DVI
AUDIO (L, R) IN jacks on the
TV and the AUDIO OUT
jacks on the Set-Top Box.
2
Connect an HDMI/DVI 
video cable between the
HDMI/DVI IN jack on the 
TV and the DVI OUT jack 
on the Set-Top Box.
NOTES
•For an explanation 
of Component video, see 
your Set-Top Box owner’s 
manual.
•Requires a Cable Converter.
•Make sure the DVI source’s
power is on, or you will be
unable to select it in the
TV menus source list.
Connections
English - 22
TV Rear Panel
DTV Set-Top Box
Incoming
Cable or 
Antenna
TV Rear Panel
DTV Set-Top Box
Incoming
Cable or 
Antenna
1
1
2
2
BP68-00524A-00(016~025)  6/3/05  3:17 PM  Page 22 
						

							English - 23
Connecting to HDMI (High Definition Multimedia Interface)
1
Connect an HDMI cable
between the HDMI/DVI IN 
jack on the TV and the HDMI
OUT jack on the Set-Top Box.
NOTE
•Make sure the HDMI/DVI
source’s power is on, or you
will be unable to select it in the
TV menu’s source list.
TV Rear Panel
DTV Set-Top Box Incoming
Cable or 
Antenna
BP68-00524A-00(016~025)  6/3/05  3:17 PM  Page 23 
						

							Connecting a Digital Audio System
There are many types of digital audio systems on the market today.
A simplified illustration of an audio system is shown below. For more information, see your
audio system owner’s manual.
1
If your audio system has an
optical digital audio input,
connect to the “DIGITAL
AUDIO OUT (OPTICAL)” jack
on the TV.
NOTE
•OPTICAL: converts the electric
signal into an optical light
signal, and transmits it through
glass fibers.
See page 67 to set the digital
output format (Dolby Digital or
PCM) appropriate to your 
digital audio component.
Connecting to an Analog Amplifier
1
The “AUDIO OUT” terminals
cannot be used for external
speakers. You must hook
them up to an amplifier.
When an audio amplifier is
connected to the “AUDIO
OUT” terminals: Decrease
the gain (volume) of the
audio amplifier, set the 
internal mute on in the TV’s
Sound Menu and adjust the
volume level with the volume
control of the amplifier.
NOTE
•If using the HDMI or Component
input on the TV, the audio output
signal is available only when the
TV’s Internal Mute is set to on.
(Refer to page 68)
Connections
English - 24
TV Rear Panel
Audio System
TV Rear Panel
Amplifier
BP68-00524A-00(016~025)  6/3/05  3:17 PM  Page 24 
						

							Operation
BP68-00524A-00(016~025)  6/3/05  3:17 PM  Page 25 
						

							Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the front panel.
Viewing the Menus and On-Screen Displays
The on-screen menu system allows you to control the settings of your TV. Access the on-screen menu 
system by pressing the MENU button on the remote control. Once the on-screen menu appears, use
the …/†/œ/√/ENTER buttons on your remote control to select menu items and make adjustments. 
You can also view the on-screen menu system and make some adjustments using the TV’s side panel 
buttons.
English - 26
Operation
Viewing the Menus
1
Press the MENU button.
The main menu is displayed.
There are six menu groups:
“Input”, “Picture”, “Sound”,
“Channel”, “Setup”, and
“Guide”.
2
Press the …or †button to
select an item you want 
in the menu. 
Press the œ, √or ENTER 
button to display, change, 
or use the selected items.
Use the ENTER button to
enter items in the menu.
3
Press the EXIT button to exit.
Viewing the Display
Press the INFO button on the
remote control. 
The TV displays the current 
channel, the status of certain 
picture and sound settings and 
the current time.
The information displayed varies
according to the selected source.Cable 3
Picture Mode
Sound Mode
MTS
Caption
V-Chip
No Time  InformationStandard
Custom
Stereo
Off 
Off
Picture
Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Guide
Input
Source List : TV√Edit Name√Anynet
MoveEnterExit
Input
Picture
Sound
Channel
Setup
Guide
BP68-00524A-00(026~047)  6/3/05  3:18 PM  Page 26 
						

							English - 27
Selecting a Menu Language
1
Press the MENU button. 
Press the …or †button to
select “Setup”, then press the
ENTER button.
2
Press the ENTER button to
select “Language”.
Press the …or †button to
select “English”, “Español” 
or “Français”, then press the
ENTER button.
Press the EXIT button to exit.
Setup
Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√Function Help: Off√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Guide
Setup
Language: English
Time
V-Chip
Caption
Menu Transparency: Medium
Blue Screen : Off
Color Weakness
Function Help: Off
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Guide
English
Español
Français
BP68-00524A-00(026~047)  6/3/05  3:18 PM  Page 27 
						

							Operation
English - 28
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable 
channels. After the available channels are memorized, use the CH  and CH  buttons to scan
through the channels. This eliminates the need to change channels by entering the channel digits. 
There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels
(automatic) and adding and deleting channels (manual).
1
Press the MENU button. 
Press the …or †button to
select “Channel”, then press
the ENTER button.
2
Press the ENTER button to
select “Antenna”. 
Press the …or †button to
select “Air” or “Cable”, then
press the ENTER button.
3
Press the …or †button to
select “Auto Program”, then
press the ENTER button.
NOTE
•All available DTV and analog channels are automatically stored
in memory.
Selecting the Video Signal Source
Before your television can begin memorizing the available channels,
you must specify the type of signal source that is connected to the TV
(i.e., an antenna or cable system).
Channel
Antenna: Cable
Auto Program
Add/Delete
Favorite Channels
Name
Fine Tune
Signal Strength
LNA : Off
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Guide
Channel
Antenna : Air√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√Signal Strength√LNA : On√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Guide
Channel
Antenna : Air√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√Signal Strength√LNA : On√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Guide
Air
Cable
BP68-00524A-00(026~047)  6/3/05  3:18 PM  Page 28 
						

							English - 29
4
Press the …or †button to select the
Antenna connection, then press the
ENTER button.
When selecting Cable TV system:
Press the ENTER button to start the auto
program. By default, the cable TV system
is set to “STD”.
If you want to select another type of 
cable system, press the œbutton and 
use the …or †button to select 
Analog or Digital “STD”, “HRC” or 
“IRC”. Press the ENTER button.
5
Press the √button to select “Start”, then
press the ENTER button to start the auto
program. The TV begins memorizing all
available stations. Press the ENTER button
at any time to interrupt the memorization
process.
Press the EXIT button to exit. •Air : “Air” antenna signal
Cable : “Cable” antenna signal
Air+Cable : “Air” and “Cable” 
antenna signals
•STD, HRC and IRC identify various types of cable TV systems. 
Contact your local cable company to identify the type of cable system
that exists in your particular area. 
At this point the signal source has been selected. 
Auto Program
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Guide
Auto Program
EnterReturn
Auto Program in progress
Cable Channel  26•The TV must be connected to an
antenna in order to receive digital TV
signals. Even if a particular channel
is deleted from the memory, you can
always tune to that channel directly
by using the number buttons on the
remote control.
Stop
Select the antennas to memorize.
Air
Cable
Air+Cable
Auto Program
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
GuideStart
Select the cable system.
Analog
Digital
STD✔
HRC
IRC
STD✔
HRC
IRC
StartStart
Start
Auto Program
EnterReturn
Input
Picture
Sound
Channel
Setup
Guide
Select the cable system.
Analog
Digital
STD✔
HRC
IRC
STD✔
HRC
IRC
Start
Move
BP68-00524A-00(026~047)  6/3/05  3:18 PM  Page 29 
						

							Operation
English - 30
Adding and Erasing Channels
You can add channels that were not memorized (or delete unwanted channels from memory).
1
Press the MENU button.
Press the …or †button to
select “Channel”, then press
the ENTER button. 
2
Press the …or †button to
select “Add/Delete”, then
press the ENTER button.
3
Repeatedly pressing the
ENTER button will alternate
between add channel and
delete channel.
Press the CH  or CH 
button to switch to the
appropriate channel, then
repeat above. 
Press the EXIT button to exit.
Channel
Antenna : Air√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√Signal Strength√LNA : On√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Guide
Channel
Antenna : Air√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√Signal Strength√LNA : On√
MoveEnterReturn Input
Picture
Sound
Channel
Setup
Guide
Add/Delete
EnterMoveReturn
Cable   26Not In Memory
Press ENTER to add the channel.
Add/Delete
EnterMoveReturn
Cable   26In Memory
Press ENTER to delete the channel.
Add
Delete
BP68-00524A-00(026~047)  6/3/05  3:18 PM  Page 30