Samsung Dcs 50si General Description Manual

4.7 CALL STATISTICS
CALLS IN QUEUE NOW
How many calls are currently in queue.
This statistic is a real time statistic and so will not print on a report.
ABANDONED CALLS
This shows the number of callers that reached the UCD group, but hung up before
being answered. A high number probably means that there are not enough agents
available and the wait time is too long.
AVERAGE RING TIME
This is calculated from the time an agent begins to ring until the time an agent
answers the call, this does not...


If this number is less than the total calls received by all the agents it is possible that
calls were transferred from one agent to another.
If this number is more than the total calls received by all the agents it is possible
that calls were unanswered by an agent and went to final destination or callers
hung up while in queue.
This statistic includes:
a) Calls answered by agent.
b) Calls that are not answered by an agent and go to final destination.
c) Calls that are sent to the UCD group but...


4.8.1
4.8 AGENT STATISTICS
LOGGED IN
The number of stations programmed in the UCD group and the number of stations
that are currently logged in.
This statistic is a real time statistic and so will not print on a report.
STATUS
This screen shows the agents name, extension number and status. The status can
be In Group, Out of group or in DND.
This statistic is a real time statistic and so will not print on a report.
CALLS ANSWERED
The total number of calls answered by the agent. This does not...


5.1
PART 5. GENERAL USER INFORMATION
5.1 RADIO FREQUENCY INTERFERENCE
WARNING: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is oper-
ated in a commercial environment. This equipment generates, uses and can radiate radio
frequency energy. If not installed and operated in accordance with the instruction...


5.2
5.3TELEPHONE COMPANY INTERFACES
NOTE: Allowing this equipment to be operated in such a manner as to not provide for
proper answer supervision is a violation of part 68 of the FCC’s rules.
RINGER EQUIVALENCE (REN)
The REN is used to determine the quantity of devices which may be connected to the
telephone line. Excessive RENs on the telephone line may result in the devices not ring-
ing in response to an incoming call. In most but not all areas, the sum of the RENs should
not exceed 5.0. To...


5.3
DISA WARNING
Lines that are used for Direct Inward System Access feature must have the disconnect
supervision options provided by the telephone company insist that your service company
verify this.
WARNING: As it is impossible to prevent unauthorized access to your telephone system
by “hackers”, we suggest that you do not turn the DISA feature on unless you intend to use
it. If you do use this feature, it is good practice to frequently change passcodes and peri-
odically review your...