Samsung CLX 8385ND User Manual

4.6   
Changing the size of the paper in the paper tray
To load longer sizes of paper, such as Legal-sized paper, you need to 
adjust the paper guides to extend the paper tray.
Note 
If you have installed an optional high capacity feeder, refer to 
Quick Install Sheet to adjust paper size.
1 Ad
just the paper length guide to the desired paper length. It is 
preset to Letter or A4 size  depending on the country. To load 
another size, hold the lever and move the length guide to the 
corresponding...

4.7   
Loading paper
Loading paper in tray  1, optional tray  or optional 
high cap
acity feeder
Load the print media you use for the majority of your print jobs in the 
tray 1. The tray 1 can hold a maximum of 520 sheets of 80 g/m2 (20 lb 
bond) plain paper. 
You can purchase an optional tray and attach it below the standard tray 
to load an additional 520 sheets of paper. (Page 15.1)
1 T
o load paper, pull and open the paper tray and place paper with the 
side you want to print facing up.
Note
• When...

4.8   
3 After loading paper, set the paper type and size for the tray. See 
page  4.9 for copying and faxing or  Sof
 tware section for PC-
printing.
In the multi-purpose tray
The multi-purpose tray can hold specia l sizes and types of print material, 
such as transparencies, postcards, note  cards, and envelopes. It is useful 
for single page printing on letterhead or colored paper. 
Tips on using the multi-purpose tray
• Load only one size of print media at a time in the multi-purpose tray.
• To...

4.9   
4 Squeeze the multi-purpose tray pape r width guides and adjust them 
to the width of the paper. Do not force too much, or the paper will be 
bent, which will result in a paper jam or skew.
5 Af
ter loading paper, set the paper type and size for the multi-
purpose tray. See page  4.9  for copying and faxing or the  Sof
 tware 
section  for
 PC-printing.
Note 
The settings made from the printer driver override the 
settings on the control panel.
6 Af
ter printing, fold the multi-purpose tray...

5.1   
5 Copying
This chapter gives you information abo ut using your machine as a copy 
machine.
This chapter includes:
• Understanding the Copy screen
• Copying originals
• Changing the settings for each copy
• Using special copy features
Understanding the Copy screen
When you press  Copy on the  Main screen, the  Ready To Copy screen 
appears which has several tabs and lots of copying options. All the 
options are grouped by features so t hat you can configure your selections 
easily.
If the screen...

5.2   
• Auto Crop : Prints only the image of an original after cropping the 
blank parts like the margin. (Page 5.9)
• Multi-Bin : Allows you to select t he output mode. (Page 5.10)
Image tab
•Erase Edge : Allows you to erase punch holes, staple marks, and 
fold creases along any of the four documents edges. (Page 5.10)
• Erase Background : Prints an image with no background.   
(Page 5.11)
• Margin Shift : Creates a binding edge for the document. 
(Page 5.11)
• Scan Enhance : Use this feature for the...

5.3   
Note
To cancel the current copy job, press  Stop on the control panel. 
Or you can delete the current and pending job using  Job Status 
on the control panel. Select the job you want to cancel and 
press  Delete .
Changing the settings for each copy
On the  Basic tab of the  Copy screen, you can select copy features 
before starting to copy.
Note
The  Basic  tab setting is only for each copy. That means that the 
setting does not apply to the next copy job. After finishing the 
current copy job,...

5.4   
• 1 -> 2 Sided, Rotate Side 2 : Scans one side of the originals and 
prints on both sides of the paper, but the information on the back 
side of the print out is rotated 180°.
• 2 -> 1 Sided : Scans both sides of the originals and prints each of 
one on a separate sheet.
• 2 -> 2 Sided : Scans both sides of the original and prints on both 
sides of the paper. This function produces exactly the same print 
out from the originals.
• 2 -> 1 Sided, Rotate Side 2 : Scans both sides of the original and...

5.5   
Selecting the type of originals
Press the  Basic tab and select an appropriate original type.
• Te x t : Use for originals containing mostly text.
• Text/Photo: Use for originals with mixed text and photographs.
• Photo : Use when originals are photographs.
• Magazine : Use when originals are magazines.
Color Mode
Select the color mode you want to use.
•Color : Copys the originals in color.
• B/W : Copys the originals in black and white.
• Auto : The machine automatically senses the color of the...

5.6   
ID card copying
The machine prints one side of the orig inal on the upper half of the paper 
and the other side on the lower half  without reducing the size of the 
original. This feature is helpful for  copying a small-sized item, such as a 
business card.
Note
The original must be placed on the scanner glass to use this 
feature.
1 Pl
ace the front side of an original facing down on the scanner glass 
where arrows indicate as shown, and close the scanner lid. 
2 Pr
ess  Copy from the  Main...