Samsung CLX 8385ND User Manual

3.3   
8 Press  IP Setting . 
9 S
elect  Static and then enter  IP Address, Subnet Mask  and 
Gateway  address fields. Touch the input area then, enter addresses 
by number keypad on the control panel.  
Note
Contact the network administrator, if you are not sure how to 
configure.
10 Pr
ess  OK.
Note
You can also set up the network  settings through the network 
administration programs. 
• 
SyncThru™ Web Admin Service: Web-based printer 
management solution for network administrators. 
SyncThru™ 
Web...

3.4   
5 Select  Typical installation for a network printer , and then click 
Next . 
6 The
 list of printers available on the network appears. Select the 
printer you want to install from the list and then click  Next. 
• If you click the  Ad
 vanced button, you can search a printer with the 
SNMP Community Name . Default name is ‘public’.
• If you do not see your printer on the list, click  Update to refresh the 
list, or select  Add TCP/IP Port  to add your printer to the network. 
To add the printer...

3.5   
8 Select the name of your printer and click  . 
Note
If you cannot find your printer name, click   to refresh the 
list.
9 En
ter the network interfaces MA C address, IP address, subnet 
mask, default gateway, and then click  Apply.
Note
If you do not know the network interfaces MAC address, 
print the machines network information report. ( See 
  page  13.1  for  Printing a machine report )
10 Click  OK to c
 onfirm the settings.
11 Click  Exit to cl
 ose the SetIP program.
Altitude adjustment...

3.6   
3 When the login message appears, enter password with number 
keypad and press  OK. (Page  3.5 )
4 Pre
ss the  General tab > Date & Time  > Date&Time.
5 Se
lect date and time using left/ri ght arrows. Or touch the insert area 
and use the numeric keypad on the control panel.
6 Pr
ess  OK.
Note
To change the format of date and time, press  Date Format and 
Time Format .
Changing the display language
To change the language that appears on the display, refer to the following 
steps.
1Pr
ess  Machine...

3.7   
Note
If the optional tray is not installe d, the tray options on the screen 
is grayed out.
Changing the default settings
You can set the default values for copy , fax, email, scan and paper all at 
once. 
1 Pr
ess  Machine Setup  on the control panel.
2 Pr
ess  Admin Setting .
3 Whe
n the login message appears, enter password with number 
keypad and press  OK. (Page  3.5 )
4 Pre
ss the  General tab > Default Settings  > Default Option.
5 Pre
ss the function you want to  change, and change its...

4.1   
4 Loading originals and print 
media
This chapter introduces you how to load originals and print media into 
your machine.
This chapter includes:
• Loading originals
• Selecting print media
• Changing the size of the paper in the paper tray
• Loading paper
• Setting the paper size and type
Loading originals
You can use the scanner glass or DADF to load an original for copying, 
scanning, and sending a fax.
On the scanner glass
Make sure that no originals are in the DADF. If an original is detected...

4.2   
To load an original into the DADF:
1 Flex or fan the edge of the paper stack to separate the pages before 
loading originals.
2 Load
 the originals  face up into the DADF. Make sure that the bottom 
of the original stack matches the paper size marked on the 
document input tray.
3 Ad
just the document width guides to the paper size.
Caution  
Dust on the DADF glass may cause black streaks on the 
printout. Always keep it clean.
Selecting print media
You can print on a variety of print media, such...

4.3   
Specification on print media
Ty p eSizeDimensionsWeightCapacitya
a. Maximum capacity may differ depending on media we ight, thickness, and environmental conditions.
Plain paper Letter 216 x 279 mm (8.5 x 11 inches)• 60 to 90  g/m2 (16 to 24  lb bond) 
for the tray1.
• 60 to 90  g/m
2 (16 to 24  lb bond) 
for the multi-purpose tray
• 60 to 90  g/m
2 (16 to 24  lb bond) 
for the high capacity feeder • 500 sheets of 80 g/m
2 
[20 lb(75 g/m2) bond 520 
sheets] paper in the tray1
• 100 sheets of 80...

4.4   
Media sizes supported in each mode
Guidelines for selecting and storing print media
When selecting or loading paper, envelopes, or other print materials, 
keep these guidelines in mind:
• Always use print media that conform  with th
 e specifications listed on 
page  4.3 .
• Attempting to print on damp, curled, wrinkled, or torn paper can cause  p
 aper jams and poor print quality.
• For the best print quality, use on ly 
 high quality copier grade paper 
specifically recommended for use in laser...

4.5   
Transparencies • To avoid damaging the machine, use only 
tra nsparencies designed for use in laser printers.
• Transparencies used in the printer must be able  to 
 withstand the machine’s fusing temperature. 
Check your machine’s specification to view the 
fusing temperature, see page  17.1.
• Place them on a flat surface after removing them  fro
 m the machine.
• Do not leave them in the paper tray for long  peri
 ods of time. Dust and dirt may accumulate 
on them, resulting in spotty...