Samsung CLX 6240FX User Manual

Using USB flash memory_61
MANAGING USB MEMORY
You can delete image files stored on a USB memory device one by one or 
all at once by reformatting the device.
Deleting an image file
1.Insert the USB memory device into the USB memory port on your 
machine.
2. Press  Scan/Email .
3. Press  OK when  Scan to USB  appears on the bottom line of the display.
4. Press the left/right arrow until  File Manage appears and press  OK.
5. Press  OK when  Delete  appears. 
6. Press the left/right arrow until the fo...

62 _Maintenance
maintenance
This chapter provides informat ion for maintaining your machine and the toner cartridge.
This chapter includes:
• Printing reports
• Adjusting the color contrast
• Clearing memory
• Cleaning your machine
• Maintaining the cartridge • Replacing the toner cartridge
• Replacing the paper transfer belt
• Maintenance parts
• Managing your machine from the website
• Checking the machine’s serial number
PRINTING REPORTS
Your machine can provide various reports with useful...

Maintenance_63
5.Press  Stop/Clear  to return to ready mode.
CLEARING MEMORY
You can selectively clear information stored in your machine’s memory.
1.Press  Menu ()   until  System Setup  appears on the bottom line of the 
display and press  OK. 
2. Press the left/right arrow until  Clear Setting appears and press  OK.
3. Press the left/right arrow until the  item you want to clear appears.
4. Press  OK when  Yes appears.
5. Press  OK again to confirm clearing.
6. Repeat steps 3 through 5  to clear...

64 _Maintenance
3.Grasp the handles on the toner cartridge and pull to remove the 
cartridge from the machine.
4. Press the green release handle to release the paper transfer belt. 
Holding the handle on the paper transfe r belt, lift it out of the machine. 5.
With a dry lint-free cloth, wipe away any dust and spilled toner from the 
toner cartridges area and their cavities.
6. Locate the long strip of glass (LSU) inside the cartridge compartment, 
and gently swab the glass to see if dirt turns the...

Maintenance_65
Cleaning the scan unit
Keeping the scan unit clean helps ensure the best possible copies. We 
suggest that you clean the scan unit at  the start of each day and during the 
day, as needed.
1. Slightly dampen a soft lint-free cloth or paper towel with water.
2. Open the scanner lid.
3. Wipe the surface of the scanner glass and DADF (or ADF) glass until it 
is clean and dry.
4. Wipe the underside of the scanner lid and white sheet until it is clean 
and dry.
5. Close the scanner lid....

66 _Maintenance
Redistributing toner
When a toner is low, faded or light  areas may appear. It is possible that 
colored images may be printed with incorrect colors due to flawed mixing of 
toner colors when one of the colored toner cartridges is low on toner. You 
can temporarily improve print quality by redistributing the toner.
• The toner-related message saying that the toner is low may appear on  the display.
• The SmartPanel program window ap pears on the computer telling you 
which color...

Maintenance_67
4.Slide the toner cartridge back into the machine.
5. Close the front cover. Make sure  the cover is securely latched.
REPLACING THE TONER CARTRIDGE
The machine uses four colors and has a different toner cartridge for each 
one: yellow (Y), magenta (M), cyan (C), and black (K).
• The status LED and the toner-relat ed message on the display indicates 
which each individual toner cartridge should be replaced.
• For the CLX-6200FX, CLX-6210FX, CLX-6240FX, incoming faxes are  saved in...

68 _Maintenance
5.Holding both handles on the toner cartridge, thoroughly rock it from side 
to side to evenly distribute the toner.
 
6.Place the toner cartridge on a flat  surface, as shown, and remove the 
paper covering the toner cartridge by removing the tape.
7. Make sure that the color of the toner cartridge matches the color slot and 
then grasp the handles on the toner cartri dge. Insert the cartridge until it 
clicks into place.
8. Close the front cover. Make sure the  cover is securely...

Maintenance_69
4.Take a new paper transfer belt out of its package.
5. Holding the handle on the new paper tran sfer belt, align it with the slots 
on the inside of the front cover.
6. Lower the paper transfer belt until it  is parallel with the front cover and 
firmly seated.
 
7. Close the front cover firmly.
8. Turn the machine on.
MAINTENANCE PARTS
To avoid print quality and paper feed  problems resulting from worn parts, 
and to maintain your machine in top working condition the following...

70 _Maintenance
Replacing the DADF (or ADF) rubber pad
You will need to replace the DADF (or  ADF) rubber pad when there seems to be 
a consistent problem with paper pickup  or when its specified yield is reached.
For the ADF 
(CLX-6200FX only)
1.Open the ADF cover.
2. Rotate the bushing on the right end of the ADF roller toward the ADF 
and remove the roller from the slot.
3. Remove the ADF rubber pad from the ADF, as shown.
4. Insert a new ADF rubber pad into place.
5. Align the left end of the ADF...